M8S - Subwoofer AV:link - Free user manual and instructions
Find the device manual for free M8S AV:link in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | AV:link |
| Model | M8S |
| Dimensions (W x H x D) | 300 x 300 x 300 mm |
| Weight | 5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Amplifier Power | 100 W RMS |
| Frequency Response | 30 Hz - 150 Hz |
| Driver Size | 8 inches |
| Impedance | 4 ohms |
| Input Connections | RCA line input |
| Output Connections | Speaker level outputs |
| Controls | Volume, Crossover frequency, Phase switch |
| Enclosure Type | Bass reflex with front-firing port |
| Cabinet Material | MDF with black vinyl finish |
| Protection Features | Overload, short circuit, thermal protection |
| Power Consumption | 120 W max |
| Standby Power | < 0.5 W |
| Included Accessories | Power cord, user manual, RCA cable |
| Cleaning | Wipe with dry cloth, avoid liquids |
| Safety | Place on stable surface, ensure ventilation |
Frequently Asked Questions - M8S AV:link
How do I connect the M8S subwoofer to my AV receiver?
Use an RCA cable to connect the subwoofer's LINE IN to the subwoofer pre-out on your AV receiver. Ensure both devices are turned off before connecting.
What is the optimal placement for the subwoofer?
Place the subwoofer near a corner or along a wall to enhance bass response. Avoid placing it in the center of the room or too close to furniture that may cause vibrations.
How do I set the crossover frequency?
Start with the crossover knob set to around 80 Hz, which is common for home theater. Adjust based on your main speakers' capabilities; higher for smaller speakers, lower for larger ones.
Why is there no sound from the subwoofer?
Check that the subwoofer is powered on, the volume is turned up, and the connection cable is secure. Also verify that your AV receiver's subwoofer output is enabled.
Can I use the subwoofer with a stereo amplifier?
Yes, if your stereo amplifier has a subwoofer pre-out or you can use a high-level input (speaker wire) if available. Otherwise, a line-level adapter may be needed.
What is the phase switch for?
The phase switch (0° or 180°) helps align the subwoofer's output with your main speakers. Set it to the position that gives the fullest bass at your listening position.
How do I clean the subwoofer?
Use a soft, dry cloth to wipe the cabinet. Do not use any liquids or cleaners. Ensure the subwoofer is unplugged before cleaning.
What should I do if the subwoofer gets too hot?
Turn off the subwoofer and allow it to cool. Ensure proper ventilation around the device. If overheating persists, reduce the volume or check for obstructions.
Is the M8S subwoofer compatible with 4-ohm speakers?
Yes, the subwoofer has a 4-ohm impedance and is designed to work with most home audio systems. However, always check your amplifier's specifications.
How can I download the user manual?
Visit the official AV:link website or the support page for the M8S. You can also use the QR code or download link provided in the product packaging.
User questions about M8S AV:link
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual M8S - AV:link and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M8S by AV:link.