CRUX SOCGM-17C - Car audio interface

SOCGM-17C - Car audio interface CRUX - Free user manual and instructions

Find the device manual for free SOCGM-17C CRUX in PDF.

📄 3 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CRUX SOCGM-17C - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type Radio Interface Module
Brand CRUX
Model SOCGM-17C
Vehicle Compatibility Select GM Class II Data Bus vehicles (2000-2013) including Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, Saab, Saturn
Power Supply 12V DC from vehicle electrical system
Audio System Support Bose, Monsoon, Y-91, and non-amplified systems (Y-91 Premium Bose not retained on 2002-2004 trucks/SUVs)
Chime Retention Yes, retains factory chime functions
Chime Volume Adjustment Built-in potentiometer, adjustable via screwdriver
Wiring EIA color coded for easy installation
Connectors 24-pin and 16-pin connectors; 8-pin male/female for audio system selection
Installation Plug-and-play with factory harness; requires aftermarket radio
Dimensions (approx.) 2 x 3 x 1 inches
Weight (approx.) 0.2 lbs
Color Black
Material Plastic with ventilation grille
Operating Temperature -20°C to 85°C
Included Components SOCGM-17C module, harness with coiled connector
Maintenance Wipe with dry cloth; avoid liquids
Safety Disconnect vehicle battery before installation; follow wiring diagram
Spare Parts / Repairability No user-serviceable parts; contact CRUX for replacement

Frequently Asked Questions - SOCGM-17C CRUX

Which vehicles are compatible with the CRUX SOCGM-17C?
The SOCGM-17C is compatible with select GM Class II Data Bus vehicles from 2000-2013, including Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, Saab, and Saturn. See the vehicle application list for exact models and years.
Does the SOCGM-17C retain factory chimes?
Yes, it retains all factory chime functions such as door ajar, key reminder, and turn signal sounds.
How do I adjust the chime volume?
Use a small screwdriver to turn the potentiometer on the module. Clockwise increases volume, counter-clockwise decreases. It is preset at halfway.
Can this module be used with a Bose factory amplifier?
Yes, the SOCGM-17C has a built-in audio level adaptor for amplified systems. Connect the male 8-pin connector to the GRAY female connector on the module (labeled 'Bose').
What if my vehicle has a non-amplified audio system?
For non-amplified systems, connect the male 8-pin connector to the BLACK female connector on the module (labeled 'Non Bose').
Does the SOCGM-17C support Y-91 audio systems?
Yes, it supports Y-91 audio systems, but note that it does not retain the Y-91 Premium Bose amplifier on 2002-2004 trucks and SUVs. For those, use part# SWRGM-48.
Is the wiring color coded?
Yes, the harness uses EIA color coded wires for easy identification during installation.
How do I install the SOCGM-17C?
Connect the 24-pin connector to the vehicle's factory harness, then the 16-pin connector to your aftermarket radio. Select the audio system connection (Bose or Non Bose) as described. Adjust chime volume if desired.
What should I do if the chime sounds when pressing traction control or DIC buttons on a Corvette?
This is a known behavior on some Corvettes. It is normal and not a malfunction.
Where can I find the user manual for this module?
The user manual is available for free download in PDF format on the notice-facile.com website.

User questions about SOCGM-17C CRUX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car audio interface in PDF format for free! Find your manual SOCGM-17C - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SOCGM-17C by CRUX.

USER MANUAL SOCGM-17C CRUX

  • Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.
  • Supports Bose, Monsoon, Y-91 audio* and non-amplified audio systems.
  • Retains chime functions.
  • Built-in chime volume adjustment.
  • EIA color coded wiring for easy installation.

*Does not retain Y-91 Premium Bose amplifier on 2002-2004 trucks and SUVs; use part# SWRGM-48 instead.

PARTS INCLUDED:

CRUX SOCGM-17C - PARTS INCLUDED: - 1

natural_image Black rectangular electronic device with ventilation grille and mounting bracket (no visible text or symbols)

CRUX SOCGM-17C - PARTS INCLUDED: - 2

natural_image Coiled electronic circuit board with multiple connectors (no visible text or symbols)

SOCGM-17C Module SOCGM-17C Harness

INSTALLATION DIAGRAM:

CRUX SOCGM-17C - INSTALLATION DIAGRAM: - 1

flowchart
graph TD
    A["24-Pin Connector"] --> B["16-Pin Black Connector"]
    B --> C["Aftermarket Radio"]
    C --> D["Chime volume adjustment"]
    D --> E["CRUX INTERVAPIC SOLUTIONS"]
    E --> F["See below for Audio connection options"]
    F --> G["TO FACTORY HARNESS"]
    H["Reverse Gear Output"] --> I["Violet/White"]
    H --> J["Orange"]
    H --> K["Blue/ White"]
    H --> L["Yellow"]
    H --> M["Red"]
    H --> N["Black"]
    H --> O["Gray"]
    H --> P["Gray/Black"]
    H --> Q["White"]
    H --> R["White/Black"]
    H --> S["Violet"]
    H --> T["Violet/Black"]
    H --> U["Green"]
    H --> V["Green/Black"]

SELECTING THE AUDIO SYSTEM:

If the vehicle is equipped with an amplified audio system, the SOCGM-17C has a built-in audio level adaptor that outputs the proper audio level from the aftermarket radio to the factory amplifier. To use this feature, plug in the male 8-pin connector on the SOCGM-17C harness to the GRAY female 8-pin connector on the SOCGM-17C module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see picture below)

If the vehicle is NOT equipped with a factory amplified system, plug in the male 8-pin connector to the BLACK female 8-pin on the SOCGM-17C module.

Non-BOSE (Non-Amplified) Connection BOSE (Amplified) Connection

CHIME VOLUME ADJUSTMENT:

The SOCGM-17C has a potentiometer to adjust the chime volume. It is set at half way by default. To adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase the volume and counter-clockwise to decrease the volume.

Chime Volume Adjustment

VEHICLE APPLICATIONS:

BuickGMC
2004-2005Century2004--2011Canyon
2005-2007LaCrosse2002-2009Envoy
2004-2007Rainier2003-2007Savana
2003-2005Rendezvous2003-2006Sierra
2005-2007Terraza2007Sierra Classic
2003-2006Yukon
Cadillac
2004-2006EscaladeHummer
2003-2007H2
2005-2009H3
Chevrolet
2003-2006Avalanche
2000-2005CavalierIsuzu
2004-2013Colorado2003-2008Ascender
2006-2013Corvette
2004-2007ExpressOldsmobile
2000-2005Impala2001-2004Alero
2000-2005Monte Carlo2002-2004Bravada
2003-2004S-102000-2004Silhouette
2003-2006Silverado
2007Silverado ClassicPontiac
2003-2006SSR2001-2005Aztek
2003-2006Suburban2001-2005Grand Am
2003-2006Tahoe2004-2008Grand Prix
2002-2009Trailblazer2000-2006Montana
2005-2008Uplander2000-2005Sunfire
2003-2005Venture
Saab
2005-20089-7X
Saturn
2005-2007Relay

NOTE:

There are instances on the Corvette when the chime will sound when either the “Traction Control” or the “DIC” (Driver Information Center) buttons are pressed.

ACTIVE HANDLING

FUEL 2 GAGES 3 TRIP OPTIONS 5 E/M

Traction Control Button Driver Information Center Buttons

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CRUX

Model : SOCGM-17C

Category : Car audio interface