KVF22LSS - Kitchen sink CDA - Free user manual and instructions

Product type	Kitchen sink
Brand	CDA
Model	KVF22LSS
Material	Stainless steel
Finish	Brushed stainless steel
Number of bowls	Double bowl
Installation type	Undermount
Overall dimensions (L x W x D)	860 x 450 x 200 mm
Cut-out dimensions (L x W)	840 x 430 mm
Weight	12 kg
Bowl depth	180 mm
Drain hole diameter	90 mm (standard)
Faucet holes	1 or 3 (pre-drilled)
Included accessories	Basket strainer, mounting clips
Surface treatment	Sound-dampening pads, anti-condensation coating
Cleaning instructions	Use mild soap and water; avoid abrasive cleaners
Maintenance	Rinse after use, dry to prevent water spots
Warranty	10 years against manufacturing defects
Spare parts availability	Replacement strainers and clips available
Repairability	Non-repairable; replace entire sink if damaged

Frequently Asked Questions - KVF22LSS CDA

What is the material of the CDA KVF22LSS kitchen sink?

The sink is made of brushed stainless steel, which offers durability and resistance to rust and stains.

What are the dimensions of the sink?

The overall dimensions are approximately 860 x 450 x 200 mm (L x W x D), with a cut-out of about 840 x 430 mm. Bowl depth is 180 mm.

Is the sink top-mount or undermount?

This sink is designed for undermount installation, providing a seamless look with your countertop.

Does the sink come with mounting hardware?

Yes, the sink includes mounting clips and a basket strainer for the drain.

How many bowls does the sink have?

It is a double bowl sink, allowing separation of tasks like washing and rinsing.

What size drain does it use?

The drain hole is 90 mm in diameter, which is standard for most kitchen sinks.

Can I install a garbage disposal?

Yes, the drain is compatible with most standard garbage disposals. Check your model's compatibility.

How should I clean the stainless steel sink?

Use a mild soap and water with a soft cloth. Avoid abrasive pads or harsh chemicals to prevent scratching.

Is there a warranty?

CDA offers a 10-year warranty against manufacturing defects. Keep your receipt.

Are spare parts available?

Yes, you can purchase replacement strainers and mounting clips from CDA or authorized retailers.

USER MANUAL KVF22LSS CDA

Thoroughly check the sink and any fittings for signs of transport (or other) damage. Please note: After fitting, sinks cannot be returned for credit or replacement.

Offer up the sink to the worktop and/or the cabinets to confirm that the external dimensions of the bowls are compatible with the cabinets themselves.

Confirm that with the sink in position:

• There is adequate space to install any taps or other required accessories.
• There is adequate space to install the waste pipe work and that any necessary modification to internal shelves to accommodate the waste (and trap) is acceptable.
• Access to any water stop-cock or other services will still be adequate after the installation.

Installation

- Refer to the cut-out sizes on the back of this manual and use them to mark out where the worktop needs to be cut. Double-check the dimensions before cutting the worktop aperture.

- After cutting out the worktop aperture, we recommend you seal the cut edges with silicone (or similar) sealant to help prevent ingress of water.

- It is often easier to mount the taps, waste-fitting and overflow onto the sink prior to fitting the sink to the worktop.

- The edges of the sink should be bedded onto a bead of silicone (or similar) sealant, to create a barrier to the ingress of water and

other items between sink and worktop.

• After positioning the sink on the worktop, position the fixing brackets as shown in Fig. 1, then tighten their screws.

• Do not use a power tool to tighten the screws; by using a hand tool it is easier to ensure that they are tightened just enough to clamp down on the worktop and no more.

• After fixing, ensure the sealant forms a continuous bead to prevent water ingress.

• Remove any excess sealant using an appropriate method as recommended by the sealant manufacturer.
• The taps, waste-fitting and overflow can now be mounted onto the sink (if not already done) and fully connected to their respective services.
• To check the waste for leaks, close the plug/basket of the waste fitting, open the tap and fill the sink to the level of the overflow; turn off the tap and wait several minutes to verify that the water doesn’t drain away.
  • Empty the sink.

After fitting, ensure that the enclosed “Stainless Steel Sinks Use and Maintenance” guide is retained for the customer and/or user of the sink.

E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the right to change specifications without prior notice.

Cut-Out Dimensions

Please contact our Customer Care Department for Service on the details below

Customer Care Department

The ICD Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail]