PT390AU - Receiver Pyle - Free user manual and instructions
Find the device manual for free PT390AU Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Pyle |
| Model | PT390AU |
| Dimensions (W x H x D) | 17.2 x 5.1 x 12.6 inches |
| Weight | 8.8 lbs |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Output | 2 x 100W RMS (4 ohms) |
| Impedance | 4-8 ohms |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | 80 dB |
| Audio Inputs | 2 x RCA, 1 x AUX (3.5mm), 1 x USB, 1 x SD card |
| Audio Outputs | 2 x Speaker terminals, 1 x Subwoofer pre-out |
| Radio Tuner | FM with 30 presets |
| Remote Control | Included (IR) |
| Display | LED digital display |
| Bluetooth | Built-in, version 4.2 |
| Material | Aluminum front panel, metal chassis |
| Cooling | Convection, keep ventilation open |
| Cleaning | Dry cloth, no liquid cleaners |
| Safety | Do not expose to moisture or heat |
| Spare Parts | Contact Pyle customer service for replacement parts |
Frequently Asked Questions - PT390AU Pyle
How do I connect my speakers to the PT390AU receiver?
Use bare wire or banana plugs. Connect the positive (+) terminal of the receiver to the positive terminal of the speaker, and negative (-) to negative. Ensure the impedance is between 4 and 8 ohms.
Can I stream music via Bluetooth?
Yes, the PT390AU has built-in Bluetooth 4.2. Enable Bluetooth on your device, search for 'PT390AU', and pair.
What is the maximum power output?
The receiver delivers 2 x 100W RMS into 4 ohms, sufficient for most home audio setups.
How do I reset the FM tuner presets?
Press and hold the 'Memory' button for 5 seconds until the display flashes. Then use the tuning knob to select a station and press 'Memory' again.
My receiver turns off suddenly. What should I check?
Check for short circuits in speaker wires, ensure proper ventilation, and verify the power supply. If it continues, contact support.
Can I use a subwoofer with this receiver?
Yes, connect a powered subwoofer to the 'Subwoofer Pre-Out' RCA jack on the back.
What audio sources can I connect?
You can connect CD players, turntables (with phono preamp), smartphones, computers, USB drives, and SD cards via the corresponding inputs.
How do I clean the receiver?
Unplug the unit and wipe with a soft, dry cloth. Do not use any liquid cleaners or abrasive materials.
Is there a remote control included?
Yes, an IR remote control is included for basic functions like volume, input selection, and tuner.
What are the dimensions of the PT390AU?
The receiver measures approximately 17.2 x 5.1 x 12.6 inches (WxHxD) and weighs 8.8 lbs.
User questions about PT390AU Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PT390AU - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PT390AU by Pyle.