PBTW20WT - Pregnant Pyle - Free user manual and instructions
Find the device manual for free PBTW20WT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | Pyle |
| Model | PBTW20WT |
| Color | White |
| Dimensions (L x W x H) | 6.7 x 2.4 x 2.4 inches (170 x 60 x 60 mm) |
| Weight | 0.66 lbs (300 g) |
| Power Output | 2 x 20W (stereo) |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 33 ft (10 m) |
| Battery Type | Built-in rechargeable, 2200 mAh |
| Playtime | Up to 8 hours |
| Charging Port | Micro USB |
| Water Resistance | IPX5 (splash-proof) |
| Input Options | Bluetooth, AUX, TF card, USB |
| Built-in Microphone | Yes (for hands-free calls) |
| Controls | Volume, Play/Pause, Skip, Power |
| Frequency Response | 100 Hz - 20 kHz |
| Signal-to-Noise Ratio | >80 dB |
| Driver Size | 2 x 2.5 inches |
| Impedance | 4 ohms |
| Care and Maintenance | Wipe with a dry cloth; avoid liquids inside |
| Safety | Do not expose to extreme temperatures or moisture |
| Spare Parts / Repairability | Contact Pyle support for replacements |
Frequently Asked Questions - PBTW20WT Pyle
How do I pair my Pyle PBTW20WT with a Bluetooth device?
Turn on the speaker and press the Bluetooth button until the indicator flashes. On your phone/tablet, enable Bluetooth and select "Pyle PBTW20WT" from the list. Pairing is complete when the indicator stops flashing.
How do I charge the speaker?
Connect the included Micro USB cable to the charging port and plug the other end into a USB power adapter (5V/1A). The LED indicator will turn red during charging and turn off when fully charged. A full charge takes about 3 hours.
Can I use the speaker while it is charging?
Yes, you can play music while charging. However, to ensure battery longevity, it is recommended to occasionally use the speaker on battery power until it is drained.
Is the Pyle PBTW20WT waterproof?
The speaker has an IPX5 rating, meaning it is splash-proof. It can withstand light rain or sweat, but should not be submerged in water.
How do I reset the speaker to factory settings?
Press and hold the Power and Volume+ buttons simultaneously for 5 seconds until the speaker turns off. Then turn it on again. All paired devices will be cleared.
How do I use a TF card with this speaker?
Insert a TF (microSD) card with MP3 files into the TF card slot. The speaker will automatically switch to TF card mode and start playing. Use the play/pause and skip buttons to control playback.
What is the battery life of the PBTW20WT?
The built-in 2200mAh battery provides up to 8 hours of playtime at moderate volume levels. Actual battery life may vary depending on volume and music style.
Can I connect two Pyle speakers together for stereo sound?
This model does not support TWS (True Wireless Stereo) pairing. Each speaker operates independently. For stereo sound, connect one speaker to the left channel and another to the right via AUX cables.
How do I clean the speaker?
Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the ports. For the speaker grille, use a soft brush to remove dust.
What should I do if there is no sound coming from the speaker?
First, ensure the speaker is powered on and the volume is turned up. Check that the source device is connected and playing. If using Bluetooth, try re-pairing. If using AUX, ensure the cable is fully inserted. If the issue persists, reset the speaker as described in the FAQ.
User questions about PBTW20WT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual PBTW20WT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PBTW20WT by Pyle.