TPRIII 750M - Heating Creda - Free user manual and instructions
Find the device manual for free TPRIII 750M Creda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Electric Panel Heater |
| Model | TPRIII 750M |
| Brand | Creda |
| Power Output | 750 W |
| Voltage | 220-240 V ~ 50 Hz |
| Heating Element | Convection (no fan) |
| Dimensions (H x W x D) | 600 x 450 x 100 mm |
| Weight | 5.2 kg |
| Mounting | Wall-mounted or freestanding with feet |
| Controls | Rotary thermostat with frost protection setting |
| Safety Features | Overheat protection, tip-over switch (in freestanding mode) |
| IP Rating | IP24 (splash-proof, suitable for bathrooms) |
| Noise Level | Silent operation |
| Timer | No built-in timer |
| Remote Control | Not included |
| Recommended Room Size | Up to 15 m² (for well-insulated rooms) |
| Material | Steel body, powder-coated |
| Color | White |
| Energy Efficiency Class | C (typical for 750 W) |
| Warranty | 2 years |
| Maintenance | Wipe with a damp cloth; do not use abrasive cleaners. Clean ventilation grilles regularly. |
| Spare Parts Availability | Contact Creda customer service for replacement feet, thermostat, etc. |
| Repair Information | Refer to user manual for troubleshooting; professional repair recommended. |
Frequently Asked Questions - TPRIII 750M Creda
Can the Creda TPRIII 750M be used in a bathroom?
Yes, it has an IP24 rating, making it splash-proof. However, it must be installed according to local electrical regulations and kept at least 60 cm from water sources.
How do I install the heater on a wall?
Use the supplied wall brackets and screws. Ensure the wall is load-bearing, drill holes, insert wall plugs, and secure the bracket. Then hang the heater at least 20 cm from the floor and ceiling.
The heater does not produce heat. What should I check?
First, ensure the thermostat is set above room temperature. Check if the power cord is plugged in and the circuit breaker is on. If still not working, the overheat protection may have tripped; unplug for 30 minutes and try again.
How do I clean the Creda TPRIII 750M?
Always unplug the heater and let it cool. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or submerge in water. Vacuum the ventilation grilles to remove dust.
Is the heater suitable for a large room?
The 750W output is best for small to medium rooms up to about 15 m². For larger spaces, a higher wattage or additional heating may be needed.
Does the heater have a tip-over switch?
Yes, when used as a freestanding unit with the feet attached, the heater will automatically shut off if it is knocked over.
Can I paint the heater?
No, painting may affect performance and safety. The surface is factory-finished and should not be coated.
How do I set the thermostat?
Turn the knob clockwise from the frost protection setting (snowflake symbol) to the desired temperature. The heater will cycle on/off to maintain the set temperature.
The heater makes a clicking noise. Is this normal?
Yes, clicking sounds are normal as the thermostat switches the heating element on and off. If you hear unusual scraping or buzzing, check for loose parts.
Where can I find spare parts or service?
Contact Creda customer service or visit their website. Use the model number TPRIII 750M when ordering. Repairs should be done by a qualified technician.
User questions about TPRIII 750M Creda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual TPRIII 750M - Creda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TPRIII 750M by Creda.