VS-130 - Loudspeaker Victrola - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Victrola
Model	VS-130
Dimensions (H x W x D)	4.3 x 6.7 x 2.6 inches (11 x 17 x 6.6 cm)
Weight	1.6 lbs (0.73 kg)
Power Source	Built-in rechargeable battery, USB-C charging
Battery Life	Up to 10 hours at moderate volume
Bluetooth Version	5.0
Speaker Driver	Full-range 2.5 inch (63.5 mm)
Output Power	10W RMS
Frequency Response	80 Hz - 20 kHz
Impedance	4 ohms
Inputs	Bluetooth, 3.5mm AUX
Controls	Power, Volume +/-, Play/Pause, Mode, TWS pairing button
LED Indicator	Multi-color status LED (charging, pairing, connected)
Material	ABS plastic with fabric grille and rubber base
Color Options	Black, White, Blue, Red
Water Resistance	IPX5 (splash-proof)
Included Accessories	USB-C charging cable, 3.5mm AUX cable, Quick Start Guide
Warranty	1-year limited warranty
Certifications	FCC, CE, RoHS

Frequently Asked Questions - VS-130 Victrola

How do I pair the VS-130 with my phone?

Turn on the speaker and press the Pairing button until the LED flashes blue/red. On your phone, enable Bluetooth and select Victrola VS-130 from the available devices.

How long does the battery last and how do I charge it?

The battery lasts up to 10 hours at moderate volume. Charge using the included USB-C cable; a full charge takes about 2 hours. The LED is red while charging and turns off when full.

Can I use the speaker while it is charging?

Yes, you can use the VS-130 while it is plugged in. However, charging may be slower if you play at high volume.

How do I reset the speaker?

To reset, press and hold the Power button for about 10 seconds until the LED flashes rapidly. The speaker will turn off; turn it back on to complete the reset.

Is the Victrola VS-130 waterproof?

It has an IPX5 rating, meaning it is splash-proof from any direction. Do not submerge it in water.

What does the blinking blue LED mean?

A blinking blue LED indicates the speaker is in pairing mode. A solid blue light means it is connected to a device.

Can I connect two VS-130 speakers for stereo sound?

Yes, using TWS (True Wireless Stereo). Pair one speaker to your phone, then press the TWS button on both speakers to link them.

How do I clean the speaker?

Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or liquids. Avoid getting moisture into the ports or grille.

Why is there no sound from the speaker?

Check if the speaker is turned on and paired. Ensure the volume is up on both the speaker and your device. If using AUX, verify the cable is securely connected.

Can I use the AUX input and Bluetooth at the same time?

No, the speaker prioritizes the AUX input when a cable is plugged in. Bluetooth will automatically disconnect.

USER MANUAL VS-130 Victrola

Black-and-white photo of a Victrola audio amplifier with four speakers and wooden frame (no visible text or symbols beyond brand name)

MODEL: VS-130

Bluetooth Hi-Fi Speaker

The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam.

Important Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.

2. Keep these instructions—The safety and operating instructions should be retained for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions – All operating and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug the apparatus during lighting storms or when unused for long periods of time.

14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Symbolic icon of a person using a device to interact, enclosed in a circle with no text or symbols.

15.

-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

-The exclamation point within and equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

16.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

1. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
2. WARNING
   To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
3. The use of the equipment in moderate climate.
4. The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, tablecloths, curtains, etc.
5. No naked flame sources, such as lighted candles, should be placed on the apparatus.
6. The symbol with Indication AC voltage.
7. Attention should be drawn to the environmental aspects of battery disposal.
8. The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
9. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

ACCESSORIES INCLUDED

• Instruction Manual
• Bluetooth Speaker

Product Overview

Rear View

1. AC Power Cord

Connect the AC Plug into a wall outlet.

2. FUNCTION/PAIR

Press to switch between functions (Bluetooth, AUX).

3. AUX IN JACK

Connect your external device to the 3.5mm AUX IN jack.

4. BT INDICATOR

Blue light will flash when the unit is in pairing mode.

Blue light stay lit when the external device is connected to the unit.

5. ON/OFF SWITCH

Press to turn ON/OFF the unit.

Setup / Basic Operation

Setup

Connect the AC power cord to a wall outlet.

Note:

-It is strongly recommended that this product should be operated only from the type of power source indicated on the marking label.

-To prevent interference, avoid bundling audio signal cables together with the AC power cord.

Basic Operation

1. Switch the ON/OFF Switch to turn ON/OFF the unit.

2. Press the Function/Pair Button to select function (AUX/ BT).

AUX-IN OPERATION

In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable CD Player, etc.)

1. Press the Function button to select AUX IN Mode (BT Indicator LED will turn off).
2. Plug one end of the AUX IN cable (not included) into the AUX IN jack.
3. Plug the other end of the cable into the headphone jack of the external audio source.

NOTE: All playback operations are only available on your external device.

Bluetooth Operation

In BT (Bluetooth) mode, this unit can connect to external devices that have a built-in Bluetooth feature.

1. Press the Function/Pair button to select BT mode.
2. BT indicator will flash blue.
3. Open the Bluetooth Settings Menu on your external device.

Select "VS-130" from the Bluetooth Menu to connect.

If a window appears asking for a password, fill in "0000" then press "OK".

NOTE: The effective distance between your external device and this apparatus is about 33 feet (10 meters).

1. After a few seconds your device will be connected and the blue BT indicator will stay lit.

NOTE: All playback operations are only available on your external device.

Specifications

GENERAL

Power Requirements AC 120 V\~60 Hz

Power Consumption 30W

Dimensions (W x H x D) Approx. 19.7" (500mm) x 6.3" (160mm) x 5.3" (134mm)

Weight Approx. 7lbs (3.15 kgs)

AMPLIFIER

Output Power 15 W + 15 W

Frequency Response 60 to 20,000 Hz

SPEAKER SYSTEM

Type 2-way

Impedance 6 ohms

Output Power Max 20W

BLUETOOTH

Bluetooth Version Bluetooth V4.2

Bluetooth Profiles A2DP, AVRCP

Bluetooth Frequency range 2.402GHz-2.480GHz

Operating Distance 33 feet (10 meters)

Troubleshooting Guide

GENERAL	Symptom	Possible Cause	Solution
	·Unit will not power on.	·Unit is unplugged.	·Connect the unit to the AC power supply.
	·No sound output from speakers.	·The volume level is set too low.·The input selector does not match the playback source.	·Adjust the volume.·Select the correct input source.
	·Noise/Distortion in sound output.	·The unit is too close to a TV set or another interfering device.	·Turn off the TV or other appliance, and relocate the unit.
	·Unit fails to respond.	·It might result from external factors such as ESD (Electro-static discharge).	·Disconnect the power cord and external audio device. Re-plug the power cord after one minute.
AUX	·No sound output with external audio device plugged into rear AUX in jack.	·AUX in cord is not properly connected.	·Plug the AUX in cord securely into the AUX in Jack.
Bluetooth	·No sound.	·The unit is not in Bluetooth mode.·Your device's and/or the unit's volume is not turned up.·Your device is too far from the unit or there're some obstacle between your device and the unit.	·Ensure the unit is switched to Bluetooth mode.·Turn up the volume on your portable device and/or the unit.·Move your Bluetooth device closer to unit.·Turn off your Bluetooth device and unit then power them both back on.
	·Sound is garbled.	·Your device's and/or the unit's volume not adjusted properly.	·Turn down the volume on your device/phone.
	·Unable to pair with a Bluetooth device.	·Your device doesn't have Bluetooth connectivity.·The Bluetooth pairing is not successful	·Confirm that your device is Bluetooth compatible.·Disconnect and reconnect the unit and device again.

For further assistance with your product, call Innovative Technology at TOLL FREE# 1-877-ITECH-97 (1-877-483-2497).

Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Other trademarks and trade names are those of their respective owners.

Made in China.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

To maintain compliance with the FCC's RF exposure guidelines, place the product at least 20cm from nearby persons.

IC Statement

The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

California PROP 65 Warning

WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

WARRANTY

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of

• USD \5.00 for items \10.00 to \$39.99 (Price Paid Per Unit)
• USD \10.00 for items \40.00 to \$99.99 (Price Paid Per Unit)
• USD \16.00 for items \100.00 and up (Price Paid Per Unit)
  • Shipping fees are non-refundable
  to be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any / all of the necessary information.
  Send all inquiries or RMA request via our website www.victrola.com/pages/technical-support.

Innovative Technology Electronics LLC.

1 Channel Drive

Port Washington, NY 11050

Toll free: 1-877-483-2497

Website for support: www.victrola.com/pages/technical-support

There are no express warranties except as listed above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.