MD72-HB0 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free MD72-HB0 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server System (Motherboard-based platform) |
| Form Factor | E-ATX (12 x 10.5 inches) |
| Weight | Approximately 3.5 kg |
| Supported Processors | Dual Intel Xeon Scalable Processors (LGA 3647) |
| Memory Support | 16 x DDR4 DIMM slots, up to 2TB, 3200 MHz |
| Expansion Slots | 7 x PCIe 3.0 x16 slots |
| Storage Interfaces | 8 x SATA III (6 Gbps), 2 x M.2 (NVMe) |
| Network Connectivity | 2 x 10GbE RJ45, 1 x Gigabit management port |
| Power Supply | Redundant 800W PSU (optional) |
| Input Voltage | 100-240V AC, 50-60 Hz |
| Management | BMC with IPMI 2.0, web interface |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Relative Humidity | 10% to 85% non-condensing |
| Safety Certifications | CE, FCC, RoHS |
| Included Accessories | I/O shield, SATA cables, manual |
| Warranty | 3 years limited |
Frequently Asked Questions - MD72-HB0 GIGABYTE
How do I install the CPU on the MD72-HB0?
Refer to the manual for LGA 3647 socket. Ensure proper alignment and secure the locking mechanism. Apply a thin layer of thermal compound before installing the heatsink.
What type of memory does this server support?
This server supports DDR4 ECC registered DIMMs with speeds up to 3200 MHz. Maximum capacity is 2TB across 16 slots.
How do I update the BIOS?
Download the latest BIOS from the Gigabyte support website. Use the included BIOS update utility or the IPMI web interface to flash the new firmware.
Can I use non-ECC memory?
No, this server requires ECC memory for stability and error correction. Non-ECC memory is not supported.
What is the maximum storage capacity?
Storage capacity depends on configuration. Supports up to 8 SATA III drives and 2 M.2 NVMe drives. Additional capacity via PCIe storage adapters.
How do I access the management interface?
Connect to the dedicated management port. The default IP address is 192.168.0.120. Login with default credentials (admin/admin).
What is the typical power consumption?
Typical power consumption ranges from 200W to 400W depending on CPU load and installed components. Redundant PSU options are available.
How do I reset the BIOS settings?
Locate the CMOS clear jumper on the motherboard. Power off the system, move the jumper to the clear position for a few seconds, then return to normal. Alternatively, remove the CMOS battery briefly.
Is the MD72-HB0 compatible with Windows Server?
Yes, it supports Windows Server 2016/2019/2022 and various Linux distributions (e.g., Ubuntu, CentOS). Install the appropriate drivers from Gigabyte's support site.
Where can I download drivers?
Visit the Gigabyte support page for the MD72-HB0 model. Drivers are available for operating systems, chipset, network, and management.
User questions about MD72-HB0 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual MD72-HB0 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD72-HB0 by GIGABYTE.