WTL74051B - Washing machine BEKO - Free user manual and instructions
Find the device manual for free WTL74051B BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Beko |
| Model | WTL74051B |
| Loading Type | Front Load |
| Capacity | 7 kg |
| Maximum Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Height | 84 cm |
| Width | 60 cm |
| Depth | 50 cm |
| Weight | 72 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption (annual) | 153 kWh |
| Water Consumption (annual) | 9500 L |
| Noise Level (Wash/Spin) | 58 dB / 76 dB |
| Number of Programs | 15 |
| Key Programs | Cottons, Synthetics, Delicates, Quick 30', Daily Quick, Hand Wash, Wool, Drum Clean |
| Additional Features | AquaWave, End Time Delay, Child Lock, Load Sensor |
| Maintenance & Cleaning | Clean pump filter regularly, clean drum with Drum Clean program, wipe door seal |
| Safety Features | Child lock, overflow protection, anti-unbalance system |
| Spare Parts & Repairability | Replaceable door seal, pump filter, inlet hose; repair service available via Beko |
Frequently Asked Questions - WTL74051B BEKO
How do I install my Beko WTL74051B washing machine?
Remove all transportation bolts and packaging. Level the machine using the adjustable feet. Connect the water inlet hose to a tap with 20-100 psi pressure. Attach the drain hose to a standpipe or sink outlet. Plug into a grounded 220-240V outlet.
What is the maximum capacity?
The maximum load is 7 kg for cotton programs. For other programs, refer to the user manual for recommended loads.
How do I use the child lock?
To activate child lock, press and hold the two buttons indicated (usually Start/Pause and another) for 3 seconds until a lock symbol appears on the display. Repeat to deactivate.
Why is my machine not spinning?
Check if the machine is overloaded or if the drain filter is clogged. Ensure the load is balanced. If the issue persists, the motor or belt may need service.
How do I clean the pump filter?
Unplug the machine. Open the filter cover at the bottom front. Place a tray under it. Turn the filter counterclockwise to remove it. Clean out debris and lint. Reinsert and tighten clockwise.
What does the Drum Clean program do?
The Drum Clean program runs at a high temperature (90°C) to remove bacteria and detergent residue. It should be used monthly. Do not add laundry during this cycle.
Can I delay the start of a cycle?
Yes, press the Delay Start button to set a delay from 1 to 24 hours. The machine will start automatically after the set time.
My machine displays an error code. What should I do?
Common error codes: E01 (door not closed), E02 (no water supply), E03 (drainage problem). Refer to the user manual for a full list. Try resetting by unplugging for 1 minute.
How often should I clean the detergent drawer?
Clean the detergent drawer every 2-3 months. Remove it by pressing the blue lever, rinse under warm water, and dry before reinserting.
Where can I find spare parts?
Contact Beko customer service or visit authorized distributors. Common spare parts include door seal, pump filter, inlet hose, and drive belt.
User questions about WTL74051B BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WTL74051B - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WTL74051B by BEKO.