AT899 - Microphone Audio-Technica - Free user manual and instructions
Find the device manual for free AT899 Audio-Technica in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Miniature Cardioid Condenser Lavalier Microphone |
| Frequency Response | 40 - 20,000 Hz |
| Impedance | 200 ohms |
| Open Circuit Sensitivity | -45 dB (5.6 mV) re 1V at 1 Pa |
| Power Supply | Phantom power: 11-52V DC, 2 mA typical |
| Output Connector | 3-pin XLRM (on power module) |
| Cable Length | 1.4 m (4.6 ft) permanently attached |
| Dimensions (Microphone) | 8.4 mm (0.33 in) diameter x 16.5 mm (0.65 in) length |
| Weight (Microphone only) | 2.5 g (0.09 oz) |
| Body Color | Black |
| Accessories Included | Windscreen, Power module, Hanger, Tie clip holder |
| Polar Pattern | Cardioid |
| Phantom Power Requirements | 11-52V DC, 2 mA |
| Compatibility | Wireless systems with locking 4-pin connector (via optional cable) |
| Cleaning | Wipe with a dry cloth; avoid moisture and solvents |
| Storage | Store in a dry place, avoid extreme temperatures |
| Warranty | 2 years (check local regulations) |
| Country of Origin | Japan |
Frequently Asked Questions - AT899 Audio-Technica
What are the power requirements for the Audio-Technica AT899?
The AT899 operates on phantom power ranging from 11 to 52 volts DC, with a current draw of approximately 2 mA. It can be powered by most mixers, audio interfaces, or portable phantom supplies.
Can I use the AT899 with a wireless transmitter?
Yes, the AT899 is compatible with wireless bodypack transmitters that accept a 4-pin locking connector. An optional cable (e.g., AT899-WP) is required for connection.
What is the best placement for the AT899 lavalier microphone?
For optimal audio, clip the microphone 6-8 inches below the chin, centered on the chest. Avoid clothing rustle by securing the cable and using the included windscreen outdoor.
How do I clean and maintain the AT899?
Gently wipe the microphone body with a dry, lint-free cloth. Do not use liquids, solvents, or abrasive cleaners. Store in a dry environment when not in use.
Does the AT899 work with 48V phantom power?
Yes, 48V phantom power is within the specified range of 11-52V DC. The microphone will perform normally at 48V.
What type of cable does the AT899 come with?
The AT899 has a permanently attached 1.4 m (4.6 ft) cable terminated with a proprietary 4-pin connector that connects to the included power module. The power module outputs via a standard 3-pin XLRM.
Is the AT899 a dynamic or condenser microphone?
The AT899 is a condenser microphone, which requires phantom power to operate. It offers higher sensitivity and a wider frequency response than dynamic microphones.
What accessories are included with the AT899?
The package includes the microphone, power module, windscreen, hanger, tie clip holder, and a carrying case.
Can the AT899 be used for outdoor interviews?
Yes, it is suitable for outdoor use with the included windscreen to reduce wind noise. However, avoid direct exposure to rain or moisture.
What is the microphone's polar pattern and how does it affect recording?
The AT899 has a cardioid polar pattern, which picks up sound primarily from the front (the capsule's direction) and rejects background noise from the sides and rear. This is ideal for focusing on a single speaker.
User questions about AT899 Audio-Technica
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual AT899 - Audio-Technica and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT899 by Audio-Technica.