HR 651 C H - Cooker HOTPOINT - Free user manual and instructions

To convert the hob, you must replace the injectors on each burner. First, ensure the appliance is disconnected from the gas supply. Remove the burner caps and heads, then unscrew the old injectors using a suitable spanner. Fit the new injectors (provided with the appliance or available from Hotpoint) with the correct orifice diameter for LPG. Reassemble and adjust the minimum gas flow settings as described in the manual. Always have the conversion carried out by a qualified technician.

If the oven is not heating, first check that the appliance is plugged in and the circuit breaker is on. Verify that the oven function selector is set to a cooking mode and the thermostat is turned to a temperature. If it still doesn't heat, the heating element or thermostat may be faulty. Contact a Hotpoint authorized service center for diagnosis and repair.

For regular cleaning, use a damp cloth with mild detergent. Avoid abrasive cleaners. For stubborn dirt, use a specialized oven cleaner. The enamel interior is easy to clean. The oven door inner glass is removable: open the door, unlock the hinges, and slide out the glass for thorough cleaning. Dry all parts before reassembly.

Avoid using aluminum foil directly on the oven bottom or covering the heating elements. It can reflect heat and damage the enamel. You may place foil on a baking tray or use oven-safe dishes. Do not line the oven floor with foil as it may trap heat and cause poor cooking results.

Before replacing, ensure the oven is off and cool. Unplug the appliance. Remove the glass cover over the bulb by turning it counterclockwise. Replace the old bulb with a new 25W, 230V, high-temperature resistant bulb (E14 base). Screw the cover back on and restore power. Do not touch the new bulb with bare fingers; use a cloth.

Uneven flame can be caused by blocked burner ports. Clean the burner caps and heads with a toothbrush and soapy water. Also ensure the burner rings are properly seated. If the gas supply pressure is too low, contact your gas supplier. For LPG-operated units, check the injector size is correct.

The oven is rated with energy efficiency class A. This is a standard rating for modern Hotpoint cookers. The hob is gas-powered and not subject to EU energy labeling. Actual energy consumption will vary depending on usage.

The mechanical timer has a knob that you turn clockwise to set the desired time (up to 60 minutes). An alarm will sound when the time expires. To cancel manually, turn the knob to the '0' position. The timer does not switch off the oven automatically; it is only a reminder.

No, this freestanding cooker is designed to be placed between cabinets or against a wall. It requires adequate clearance for ventilation. If installed in an island, ensure proper gas and electrical connections and consult local regulations. Usually, a cooker like this is not recommended for island installation due to gas hose routing and stability.

Spare parts such as injectors, oven bulbs, door seals, knobs, and heating elements can be purchased from Hotpoint official distributors or authorized online retailers. Use the model number HR 651 C H to ensure compatibility. For specific parts, contact Hotpoint customer service.