HDPN 2D520PB-80 - Dishwasher HOOVER - Free user manual and instructions
Find the device manual for free HDPN 2D520PB-80 HOOVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Hoover |
| Model | HDPN 2D520PB-80 |
| Dimensions (H x W x D) | 85 x 45 x 60 cm |
| Weight | 45 kg |
| Power Supply | 230 V, 50 Hz |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 230 kWh |
| Water Consumption per Cycle | 11 L |
| Noise Level | 46 dB(A) |
| Number of Place Settings | 10 |
| Programs | Eco, Intensive, Quick, Delicate, Glass |
| Additional Functions | Half Load, Delay Start, Auto Door Open |
| Safety Features | Water Leak Protection, Child Lock, Anti-Flood System |
| Material | Stainless Steel Interior |
| Installation Type | Built-in under counter |
Frequently Asked Questions - HDPN 2D520PB-80 HOOVER
How do I install the HDPN 2D520PB-80 dishwasher?
Installation should be performed by a qualified professional. Ensure the dishwasher is level, connected to water supply (hot or cold), and securely fixed under the counter. Refer to the installation guide for detailed steps.
What detergent should I use?
Use only dishwasher-specific detergent (powder, gel, or tablets). Avoid hand dishwashing liquid as it can cause excessive suds. For best results, use a quality brand and follow the dosage instructions.
Why is the dishwasher not starting?
Check that the door is closed properly and the power cord is plugged in. Ensure the water supply is turned on and the circuit breaker hasn't tripped. Also verify that the delay start function is not active.
How do I clean the filters?
Clean the filters regularly by removing them from the bottom of the tub. Rinse under running water to remove debris. Use a soft brush if needed. Reinstall correctly. This helps maintain performance and avoid clogs.
What should I do if there is water left in the dishwasher?
First, check the drain hose for kinks or blockages. Clean the filters and ensure the drain pump is not obstructed. If the problem persists, run a drain cycle or consult a technician.
Can I use rinse aid?
Yes, rinse aid improves drying and reduces spots. Fill the rinse aid dispenser until the indicator shows full. Adjust the dosage setting based on your water hardness level.
How do I activate the child lock?
Press and hold the Child Lock button (usually marked with a key icon) for 3-5 seconds until the indicator lights up. To deactivate, repeat the same procedure.
What does the error code E01 mean?
Error E01 typically indicates a water supply issue. Check that the water tap is fully open and the inlet hose is not kinked. If the problem persists, there may be a faulty water inlet valve.
How often should I run a cleaning cycle?
It is recommended to run a cleaning cycle (using a dishwasher cleaner or vinegar) every 2-3 months to remove grease and limescale. This helps extend the life of the machine and maintain hygiene.
Where can I find spare parts?
Authorized spare parts can be obtained from Hoover service centers or online retailers. Use only genuine parts to ensure safety and compatibility. Check the model number when ordering.
User questions about HDPN 2D520PB-80 HOOVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HDPN 2D520PB-80 - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDPN 2D520PB-80 by HOOVER.