SY-HDBT-18G70-SET - Extendeur AV SY Electronics - Free user manual and instructions
Find the device manual for free SY-HDBT-18G70-SET SY Electronics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDBaseT Extender Set (Transmitter + Receiver) |
| Dimensions (TX) | 120 x 70 x 25 mm |
| Dimensions (RX) | 120 x 70 x 25 mm |
| Weight (pair) | Approx. 500 g |
| Power Supply | DC 24V, 1A (PoC supported) |
| Video Resolution | Up to 4K@60Hz 4:4:4 |
| HDMI Compliance | HDMI 2.0, HDCP 2.2 |
| Transmission Distance | Up to 70 m via CAT6/7 cable |
| Bandwidth | 18 Gbps |
| Audio Support | LPCM 7.1, Dolby TrueHD, DTS-HD |
| IR Pass-Through | 20-60 kHz, single-sided |
| RS-232 Pass-Through | Baud rate up to 115200 |
| EDID Management | Built-in EDID emulation |
| Operating Temperature | 0°C to 40°C |
| Storage Humidity | 10% to 90% RH (non-condensing) |
| Maintenance | Wipe with a dry, soft cloth. Do not use liquids. |
| Safety Warnings | Keep away from water and heat sources. Ensure proper ventilation. |
| Spare Parts | Power adapters, IR cables, mounting brackets (optional) |
| Repairability | Not user-serviceable. Contact SY Electronics for repairs. |
| General Information | Plug-and-play installation. HDBaseT Class A compliant. |
Frequently Asked Questions - SY-HDBT-18G70-SET SY Electronics
What is the maximum transmission distance?
The SY-HDBT-18G70-SET can transmit HDMI signals up to 70 meters over a single CAT6/7 cable at 4K@60Hz.
Does it support 4K resolution?
Yes, it supports 4K@60Hz 4:4:4 with full HDR and HDCP 2.2 compliance.
Can I use a CAT5e cable?
While CAT5e may work for shorter distances, CAT6 or CAT7 is recommended for the full 70m range and reliable 4K performance.
Does the extender require power at both ends?
No, it supports PoC (Power over Cable), so only one power adapter is needed; the other unit is powered via the cable.
How do I set up the IR pass-through?
Connect the IR blaster to the IR OUT port of the transmitting unit and the IR receiver to the IR IN port of the receiving unit. The IR signals will be transmitted along with the video.
Does it support RS-232 control?
Yes, it features bi-directional RS-232 pass-through at baud rates up to 115200, allowing serial control of source and display devices.
What should I do if there is no video output?
Check that the HDMI cables are securely connected, the power adapter is plugged in, and the CAT cable is straight-through (not crossover). Also ensure the EDID switch is set correctly.
Can I daisy-chain multiple extenders?
No, this extender is designed for point-to-point connections only. For longer distances, use a network switch with HDBaseT compatibility.
Is the unit compatible with all HDMI sources?
It is compatible with most HDMI sources that support HDMI 2.0 and HDCP 2.2. Older devices with HDMI 1.4 will work at reduced resolutions.
How do I clean the device?
Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Ensure the device is unplugged before cleaning.
User questions about SY-HDBT-18G70-SET SY Electronics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Extendeur AV in PDF format for free! Find your manual SY-HDBT-18G70-SET - SY Electronics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SY-HDBT-18G70-SET by SY Electronics.