Aquatic AV

GC112 - Pregnant Aquatic AV - Free user manual and instructions

Find the device manual for free GC112 Aquatic AV in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Aquatic AV GC112 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Bluetooth Speaker
Brand Aquatic AV
Model GC112
Dimensions (W x H x D) 7.5 x 3.5 x 3.5 inches
Weight 1.5 lbs (680 g)
Power Output 20W RMS
Waterproof Rating IPX7 (submersible up to 1m for 30 min)
Battery Type Rechargeable Lithium-ion
Battery Life Up to 12 hours (at 50% volume)
Charging Time 3-4 hours via Micro-USB
Bluetooth Version 5.0
Wireless Range Up to 33 feet (10 meters)
Frequency Response 80 Hz – 20 kHz
Driver Size 2 x 40mm full-range drivers
Inputs Bluetooth, 3.5mm AUX, Micro SD card
Built-in Microphone Yes (for hands-free calls)
Charging Port Micro-USB
Warranty 1 year limited
Included Accessories Micro-USB cable, 3.5mm audio cable, Carabiner, Strap
Cleaning Instructions Rinse with fresh water after use in saltwater; dry with soft cloth

Frequently Asked Questions - GC112 Aquatic AV

How do I pair my device with the GC112 speaker?
Press and hold the power button until you hear a tone. Enable Bluetooth on your device and select 'Aquatic AV GC112' from the list. If prompted, enter PIN 0000.
Is the GC112 fully waterproof?
Yes, it has an IPX7 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes. Ensure the charging port cover is tightly sealed before exposure.
How long does the battery last?
The battery lasts up to 12 hours at 50% volume. Actual battery life may vary based on volume level and audio content.
Can I use the speaker while charging?
Yes, you can use the speaker while it is charging, but it may take longer to fully charge. Avoid using it in wet conditions while charging.
How do I reset the speaker?
To reset, turn off the speaker then press and hold the 'Volume -' and 'Power' buttons simultaneously for 5 seconds until the LED flashes. This clears the paired device list.
Can I connect two GC112 speakers for stereo sound?
This model does not support True Wireless Stereo (TWS) pairing. Only one speaker can be connected at a time.
What does the LED indicator mean?
Solid blue indicates connected; fast flashing blue means pairing mode; slow blue flash indicates standby; red light shows charging; red flash means low battery.
How do I clean the speaker after saltwater use?
Rinse the speaker thoroughly with fresh water and dry with a soft, lint-free cloth. Do not use chemical cleaners. Allow the charging port to dry completely before charging.
Can I use a microSD card with the GC112?
Yes, insert a microSD card (up to 32GB) into the slot. The speaker will automatically play audio files from the card. Supported formats: MP3, WMA, WAV.
What should I do if the sound is distorted?
Reduce the volume on both the speaker and your source device. Ensure the Bluetooth connection is stable and not too far away. If using AUX, check the cable for damage.

User questions about GC112 Aquatic AV

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pregnant in PDF format for free! Find your manual GC112 - Aquatic AV and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GC112 by Aquatic AV.

USER MANUAL GC112 Aquatic AV

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Aquatic AV

Model : GC112

Category : Pregnant