IDPE 845 A1 ECO (UK) - Tumble drier INDESIT - Free user manual and instructions
Find the device manual for free IDPE 845 A1 ECO (UK) INDESIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Indesit |
| Model | IDPE 845 A1 ECO (UK) |
| Capacity | 8 kg |
| Dimensions (H x W x D) | 850 x 600 x 580 mm |
| Weight | 35 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 2400 W |
| Energy Class | A++ |
| Annual Energy Consumption | 235 kWh |
| Noise Level | 65 dB(A) |
| Drying System | Condenser |
| Number of Programs | 16 |
| Display | LED |
| Delay Start | Up to 24 hours |
| Anti-Crease Function | Yes |
| Reverse Tumbling | Yes |
| Lint Filter Cleaning Indicator | Yes |
| Water Tank Capacity | 2.4 L |
| Child Lock | Yes |
| Overheat Protection | Yes |
| Reversible Door | Yes |
| Warranty | 2 years |
| Spare Parts Availability | 10 years |
Frequently Asked Questions - IDPE 845 A1 ECO (UK) INDESIT
How do I clean the lint filter?
Open the door, pull out the lint filter from the door opening, open the filter and remove lint with your fingers or a soft brush. Rinse under running water if necessary, dry thoroughly, and reinsert. Always clean the lint filter after each cycle to maintain efficiency.
How do I empty the water tank?
Pull out the water tank located at the bottom front of the dryer. Empty it into a sink or drain. Rinse the tank and push it back into place. The water tank should be emptied after each cycle to avoid overflow.
What does the ECO cycle do?
The ECO cycle dries laundry at a lower temperature for longer to save energy. It is suitable for cotton items and reduces electricity consumption, achieving the same dryness level with less impact on the environment.
How do I set the delay start timer?
Press the Delay Start button repeatedly to select the desired delay from 1 to 24 hours. The indicator will show the delay time. Press Start to confirm. The cycle will begin automatically after the set delay.
Why is my dryer not heating up?
Possible causes: a clogged lint filter or condenser, overloading, or a faulty heating element. Clean the filter and condenser, reduce load size, and check if the dryer is in a cool room. If the problem persists, contact customer support.
Can I reverse the door opening direction?
Yes, the door is reversible. Unscrew the hinges from the current side, remove the door, and reattach it on the opposite side using the provided screw holes. Follow the instructions in the manual for detailed steps.
What is the maximum load for different fabrics?
For cotton, max 8 kg; for synthetics, max 4 kg; for delicate items, max 2 kg. Always check the care label and do not exceed 8 kg total to avoid overloading and poor drying results.
How do I cancel or stop a running cycle?
Turn the program selector dial to the Off position. If the cycle is in progress, press and hold the Start/Reset button for 3 seconds to cancel. The drum will stop and you can safely open the door after a few minutes.
How do I clean the condenser?
Locate the condenser unit (usually behind a flap at the bottom front). Remove it, rinse with water to remove lint, and dry thoroughly. Reinsert and lock. Clean the condenser monthly for optimal performance.
What do error codes like F01 mean?
Error code F01 indicates a motor fault or electrical issue. Try unplugging the dryer for 5 minutes and restart. If the code reappears, contact an authorized service center. Other codes may relate to temperature or sensor problems.
User questions about IDPE 845 A1 ECO (UK) INDESIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual IDPE 845 A1 ECO (UK) - INDESIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IDPE 845 A1 ECO (UK) by INDESIT.