DH32HD19SW - Television Digihome - Free user manual and instructions
Find the device manual for free DH32HD19SW Digihome in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | 32-inch LED TV |
| Brand | Digihome |
| Model | DH32HD19SW |
| Screen diagonal | 81 cm (32 inches) |
| Screen resolution | 1366 x 768 pixels (HD) |
| Backlight type | LED |
| Dimensions with stand (W x H x D) | 73.4 x 47.5 x 19.2 cm |
| Dimensions without stand (W x H x D) | 73.4 x 43.2 x 7.6 cm |
| Weight with stand | 4.5 kg |
| Weight without stand | 4.3 kg |
| Power supply | 220-240 V ~ 50/60 Hz |
| Power consumption (standby) | Less than 0.5 W |
| Power consumption (typical) | 35 W |
| HDMI inputs | 2 |
| USB port | 1 (media playback) |
| Antenna connector | 1 |
| Audio output | 3.5 mm headphone |
| Speakers | 2 x 8 W |
| TV standards | DVB-T/T2/C, MPEG4 |
| Main functions | Programmable sleep timer, parental control, Electronic Program Guide (EPG), teletext, adjustable picture format |
| Care and cleaning | Unplug before cleaning. Use a soft dry cloth. Do not use abrasive or liquid products. |
| Safety | Do not expose to rain or moisture. Do not block ventilation openings. |
| Spare parts and repairability | Contact Digihome after-sales service for parts. Repairability index: 6.4/10 (estimate). |
Frequently Asked Questions - DH32HD19SW Digihome
How to connect a USB flash drive or external hard drive?
Plug your USB device into the USB port located on the back or side of the TV. Use the SOURCE button on the remote control and select USB to access multimedia files (photos, music, videos).
How to perform an automatic channel search?
Press the MENU button on the remote. Go to Installation or Settings, then Auto Tuning. Confirm and wait for the scan to finish. Channels will be stored automatically.
The remote control does not work, what should I do?
Check that the batteries are inserted correctly and not worn out. Replace them if necessary. Make sure no obstacles block the TV's infrared sensor. If the problem persists, try resetting the remote by removing the batteries for 30 seconds.
How to switch between HDMI sources?
Press the SOURCE or INPUT button on the remote. Use the arrows to select the desired HDMI input (HDMI 1 or HDMI 2) and press OK.
The TV does not turn on, what to check?
Check that the power cord is properly connected to the TV and a functional power outlet. Try another outlet. If the standby light does not turn on, the problem may be internal. Contact after-sales service.
How to enable or disable parental control?
Go to MENU, then to Lock or Parental Control. Enter a PIN code (default 0000 or 1234). You can then block channels or inputs by age.
Can I use a headset?
Yes, plug your headset into the Headphone jack (3.5 mm) located on the back or side of the TV. The speakers will then be muted automatically.
How to update the TV software?
Updates are usually broadcast via the DTT signal. To check, go to MENU > Installation > Software Update and start a search. If an update is available, follow the on-screen instructions. Do not cut power during the update.
What to do if the image is distorted or does not fill the screen?
Press the FORMAT or RATIO button on the remote. Choose an appropriate format like 16:9, 4:3 or Auto. You can also adjust these settings in the Picture menu.
How to clean the TV screen?
Turn off and unplug the TV. Use a slightly damp microfiber cloth (clean water) to gently wipe the screen. Never use chemicals, alcohol, or paper towels. Dry with a dry cloth.
User questions about DH32HD19SW Digihome
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual DH32HD19SW - Digihome and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DH32HD19SW by Digihome.