Pro Diver 12556 - Watch INVICTA - Free user manual and instructions
Find the device manual for free Pro Diver 12556 INVICTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Watch |
| Brand | Invicta |
| Model | Pro Diver 12556 |
| Movement Type | Quartz (Japanese or Swiss, typical) |
| Case Diameter | 45 mm |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel Bracelet |
| Closure | Fold Over Clasp with Safety |
| Water Resistance | 200 meters (660 feet) |
| Crystal | Mineral Crystal |
| Functions | Hour, Minute, Second, Date at 3 o'clock |
| Power Source | Battery (SR626SW or similar) |
| Battery Life | Approximately 2-3 years |
| Weight | Approximately 200 g |
| Care Instructions | Rinse with fresh water after saltwater use. Avoid extreme temperatures. |
| Safety Precautions | Do not operate crown underwater. Ensure crown is screwed down before water exposure. |
| Spare Parts / Repairability | Battery replacement by a professional. Bracelet links removable. Crystal replaceable. |
Frequently Asked Questions - Pro Diver 12556 INVICTA
How do I set the time and date on my Invicta Pro Diver 12556?
Pull the crown out to the first position to set the date. Turn clockwise until the correct date appears. Then pull the crown to the second position to set the time. Turn the crown to advance the hands. Push the crown back in and screw it down to ensure water resistance.
What is the water resistance rating of the Pro Diver 12556?
The watch is water resistant to 200 meters (660 feet). It is suitable for swimming and snorkeling, but not for deep diving. Always ensure the crown is screwed down before water exposure.
How often should I replace the battery in my Invicta watch?
The battery typically lasts 2-3 years. When the watch stops or runs slow, it is time to replace the battery. Have it done by a professional to maintain water resistance.
Can I adjust the bracelet length myself?
Yes, the bracelet has removable links. Use a small screwdriver or pin pusher to remove pins. Refer to the manual for instructions, or take it to a jeweler for adjustment.
What type of movement does the Pro Diver 12556 use?
This model uses a quartz movement, which is battery-powered and known for accuracy. It requires minimal maintenance beyond battery changes.
How do I clean my Invicta Pro Diver watch?
Use a soft damp cloth to wipe the case and bracelet. For deeper cleaning, use a mild soap solution and a soft brush, then rinse with fresh water. Avoid harsh chemicals.
What should I do if the watch fogs up inside?
Fogging indicates moisture ingress. Immediately remove the watch from water and have it checked by a professional. Do not attempt to open it yourself.
Are the hands luminous?
Yes, the hour markers and hands are coated with luminous material for visibility in low light. Charge them by exposing to light.
Can I replace the crystal if scratched?
Yes, the mineral crystal can be replaced by a watchmaker. It is best to have it done professionally to maintain water resistance and fit.
Where can I find spare parts or service for my Invicta watch?
Spare parts such as batteries, crystals, and straps are available from Invicta authorized dealers or online. For service, contact Invicta customer support or a local watch repair shop.
User questions about Pro Diver 12556 INVICTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual Pro Diver 12556 - INVICTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Pro Diver 12556 by INVICTA.