PBUH 1.5 B1 - Measurement POWERFIX - Free user manual and instructions

Product Type	Laser Distance Measurer
Brand	Powerfix
Model	PBUH 1.5 B1
Measuring Range	0.05 to 40 m
Accuracy	±2.0 mm
Laser Class	Class 2, <1 mW, 635 nm
Measurement Units	m, ft/in
Functions	Single distance, continuous, area, volume, addition/subtraction, indirect measurement
Memory	Last 20 measurements
Display	Backlit LCD, 4-line display
Auto-Off	Laser: 20 s, Device: 3 min
Power Supply	2 x 1.5 V AAA batteries
Dimensions (H x W x D)	112 x 50 x 28 mm
Weight	100 g (including batteries)
Operating Temperature	0 °C to 40 °C
Storage Temperature	-20 °C to 60 °C
Cleaning	Clean lens with soft, dry cloth; do not use solvents
Safety Warnings	Do not stare into laser beam; avoid eye exposure
Spare Parts	Batteries (standard AAA); no user-serviceable parts
Reparability	Contact authorized service center for repairs

Frequently Asked Questions - PBUH 1.5 B1 POWERFIX

What is the maximum measuring range of the Powerfix PBUH 1.5 B1?

The maximum measuring range is 40 meters, with an accuracy of ±2.0 mm.

What type of batteries does it use and how long do they last?

It uses 2 x AAA batteries. Battery life is approximately 20,000 measurements under normal use.

Can the device measure area and volume?

Yes, it can calculate area and volume from distance measurements, as well as perform continuous and indirect measurements.

How do I clean the lens?

Use a soft, dry cloth to gently wipe the lens. Do not use any solvents or abrasive cleaners.

Is the laser safe for eyes?

The laser is Class 2 (<1 mW, 635 nm). Avoid staring into the beam or pointing at others' eyes.

How do I switch between meters and feet/inches?

Press and hold the UNIT button for 2 seconds to toggle between measurement units.

What should I do if the display shows 'Error'?

'Error' may indicate a measurement out of range or a low battery. Check the target distance and replace batteries if necessary.

Does it have a backlight for dark environments?

Yes, the display has a backlight that activates when any button is pressed.

Can I use the device on reflective surfaces?

Reflective surfaces may affect accuracy. For best results, use the included target plate (if available) or measure against a matte surface.

Where can I find replacement parts or get repairs?

The only user-replaceable part is the batteries. For repairs, contact the Powerfix service center listed in the manual.

USER MANUAL PBUH 1.5 B1 POWERFIX

Hand holding a digital temperature meter placed on stacked wood chips (no visible text or symbols)

MOISTURE METER PBUH 1.5 B1

GB

MOISTURE METER

Operating instructions

SI

MERILNIK VLAGE V LESU IN ZGRADBAH

Navodila za uporabo

SK

PRÍSTROJ NA MERANIE VLHKOSTI V STAVBÁCH A DREVE

Návod na obsluhu

HU

ANYAGNEDVESSÉGMÉRŐ

Használati utasítás

CZ

MĚŘIČ VLHKOSTI DŘEVA A STAVEBNÍCH MATERIÁLŮ

Návod k obsluze

DE AT CH

BAU- UND HOLZFEUCHTE-MESSGERÄT

Bedienungsanleitung

GB

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

HU

Basic Safety Instructions. 2

Component description .... 3

Initial use .... 3

Items supplied and transport inspection.... 3

Inserting / replacing the batteries 4

Handling and operation....4

Display indicators 4

Measurement of constructional material or wood moisture 5

Temperature Display 5

Light function 5

Automatic switch-off 5

Technical data 6

Wood moisture content - guidelines for fi rewood 6

Building moisture - guidelines for concrete / screed 6

Cleaning....7

Maintenance....7

Storage/Disposal 7

Storage 7

Disposal of the appliance 7

Disposing of the batteries 7

Appendix 8

Warranty 8

Service....8

Importer 8

GB

Introduction

Congratulations on the purchase of your new appliance.

You have clearly decided in favour of a high-quality product. These operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety instructions. Use this appliance only as described and only for the specified areas of application. In addition, pass these operating instructions on to whoever might acquire the appliance at a future date.

Intended use

This appliance is intended only for the non-commercial measuring of moisture in wood and construction materials. The moisture can be measured in, for example, fi rewood, paper, cardboard, construction timber, mortar, concrete and plaster. In addition, the appliance will display the room temperature in °Celsius or °Fahrenheit. This appliance is not intended for any other use or for uses beyond those detailed. Claims of any kind for damage resulting from unintended use will not be accepted. The operator alone bears liability.

Safety

In this chapter you receive important safety information regarding the handling of the appliance. This appliance complies with the statutory safety regulations. Incorrect usage can, however, lead to personal injury and property damage.

Basic Safety Instructions

For safe handling of the appliance observe the following safety information:

■ Before use check the appliance for visible external damage. Do not take into operation an appliance that is damaged or has been dropped.

This appliance may be used by children aged 8 over and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use of the appliance safely and are aware of the potential risks. Children must not play with the appliance. Cleaning and user maintenance tasks must not be carried out by children unless they are supervised.

A repair to the appliance during the warranty period may only be carried out by a customer service department authorised by the manufacturer, otherwise, no additional warranty claims can be considered for subsequent damages.

■ Do not make any unauthorised modifications or alterations to the appliance.

■ Protect the appliance against moisture and liquid penetration.

The measuring pins are very sharp. Be careful when working with the appliance. Always replace the protective cap on the appliance when it is not in use. There is also a risk of personal injury!

For safe handling of batteries observe the following safety instructions:

■ Do not throw batteries into a fi re.

■ Never short-circuit batteries.

■ Do not attempt to recharge batteries.

■ Regularly check the condition of the batteries. Leaking battery acid can cause permanent damage to the appliance. Special caution should be exercised when handling damaged or leaking batteries. Risks from acid burns! Wear protective gloves.

■ Store batteries in a place inaccessible to children. If a battery should be swallowed, seek medical attention IMMEDIATELY.

If you do not intend to use the appliance for an extended period, remove the batteries.

Component description

1 Protective cap / Test aid
② Measuring pins
③ Display
4 Battery compartment
5 ON/SET button (On/Off switch / Measuring button)
6 Button (LED on/off)
7 LED

Initial use

Items supplied and transport inspection

This appliance is supplied with the following components as standard:

• Construction materials- and wood moisture measuring appliance
• 4 × 1.5 V Batteries (AAA/Micro/LR03)
  • This operating manual

GB

NOTICE

▶ Check the contents to ensure that everything is present and for signs of visible damage.
If the contents are not complete, or are damaged due to defective packaging or through transportation, contact the Service Hotline (see chapter Service).

Inserting / replacing the batteries

Unscrew the battery compartment lid 4 on the rear of the appliance.

• Insert 4 new batteries of type AAA into the battery compartment. Be sure to insert the batteries with the correct polarity.
  ◆ Replace the battery compartment lid on the battery compartment ⁴ and screw it down firmly.

Handling and operation

In this chapter you will receive important information for the handling and operation of the appliance.

Display indicators

The display ⚠ structured as follows:

	If this symbol appears, the batteries must be replaced.
	The left scale shows wood moisture content from 6-44%.
	The right scale shows construction material moisture content from 0.2-2.0%.
	The temperature is indicated at the top of the display in °Celsius or °Fahrenheit.

The measurement result is shown in the middle of the display by measurement lines. In the left scale each measurement line represents 1 %. In the right scale each measurement line represents 0,05 %.

188°E
%
44	2.0
40	1.8
35	1.6
30	1.4
25	1.2
20	1.0
15	0.8
10	0.6
6	0.4
	0.2

Measurement of constructional material or wood moisture

Switch the appliance on by pressing the ON/SET 5 button.

Before taking the first measurement, check that the appliance is functioning correctly. For this, use the test aid ①. On the test aid ① here are four measurement points marked as Band T

- Press the measuring pins ② on the measurement points B. All measurement lines on the display ③ begin to blink.

Now press the measuring pins ② on the measurement points T. The measuring lines on the display ③ should now be showing 19% (+/- 1%).

When you arrive at the given value in both tests, the appliance is ready for use.

Press the measuring pins ② into the material to be tested. The measurement lines on the display ③ show the moisture content.

To read the result for fi rewood, cardboard and construction timber, use the left scale with the symbol

To read the results for mortar, concrete and plaster, use the right scale with the symbol □.

If the measured value exceeds the maximum values of 2 % resp. 44 %, the measurement lines start to blink.

To minimise measurement errors, carry out comparative measurements at several locations.

Temperature Display

◆ The temperature is indicated at the top of the display 3.

Press and hold the ON/SET 5 button for 3 seconds to toggle between Celsius and Fahrenheit.

Light function

◆ Press and hold the button ⚙⑥ for 3 seconds to switch the LED ⑦ on.

◆ Press the button 6 once again to switch the LED 7.

Automatic switch-off

The appliance switches itself off automatically after approx. 30 seconds without button activation. The automatic switch off is disabled when the LED ⁷ is switched on.

GB

Technical data

Power supply 4 x 1.5 V Batteries, type AAA/Micro/LR03
Precision	Wood moisture	Measurement < 30% = +/- 2%
		Measurement > 30% = +/- 4%
	Construction material moisture	Measurement < 1.4% = +/- 0.1%
		Measurement >1.4% = +/- 0.2%
Dimensions approx. 14.4 x 4.4 x 3.2 cm
Weight approx. 100 g
Operating temperature 0°-40°C

Wood moisture content – guidelines for fi rewood

6 - 15 % moisture content = Very good calorific values

16 - 20 % moisture content = Suitable for heating, but with restrictions

21 - 44 % moisture content = Not suitable for heating

Further drying required

Building moisture – guidelines for concrete / screed

The values with a dark background are classified as wet.

wet dry

Measured value scale	Concrete C20/C25	Gypsum plaster	Cement screed	Aerated concrete
2,0
1,8
1,6
1,4
1,2
1,0
0,8
0,6
0,4
0,2

Cleaning

IMPORTANT

Possible damage to the appliance.

Permeating moisture can cause damage to the appliance.

▶ To avoid irreparable damage to it, ensure that no moisture can get inside when you are cleaning the appliance.

■ Clean the housing exclusively with a soft damp cloth and a mild dishwashing liquid.

■ Clean the measuring pins with a damp cloth and dry them well afterwards.

Maintenance

■ Before every use check the appliance for visible external damage.

- Check the measuring pins before every use for damage.

Storage/Disposal

Storage

Always replace the protective cap 1 in the appliance when it is not in use.

If you do not intend to use the appliance for an extended period, remove the batteries.

Store the appliance in a dry environment.

Disposal of the appliance

Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU-WEEE (Waste Electrical and Electronic Equipment).

Dispose of the appliance through an approved disposal centre or at your community waste facility. Pay heed to the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

Disposing of the batteries

Do not dispose of the batteries with household waste. All consumers are statutorily obliged to dispose of batteries at a collection site in their community/city district or at a retail store. This obligation is intended to ensure that batteries are disposed of in an environmentally safe fashion. Only hand in batteries/cells that are fully discharged.

GB

Appendix

Warranty

The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our Customer Service Department. Only in this way can a post-free despatch for your goods be assured.

NOTICE

The warranty covers only claims for material and manufacturing defects, but not for transport damage, wearing parts or for damage to fragile components, e.g. buttons or batteries.

This product is for domestic use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorised service branch.

Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs made under the warranty. This applies also to replaced and repaired parts.

Damages and defects extant at the time of purchase must be reported immediately after unpacking, resp. no later than two days after the date of purchase.

Repairs made after the lapse of the warranty period are subject to charge.

Service

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IAN 96870

Hotline availability: Monday to Friday 08:00 - 20:00 (CET)

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Tartalomjegyzék

Bevezető 10

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Kazalo

Uvod....18

Namenska uporaba....18

Varna uporaba....18

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

Garancijski list

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Obsah

Úvod....34

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Inhaltsverzeichnis

Einleitung 42

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21 · 44867 BOCHUM · GERMANY

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND / GERMANY

www.kompernass.com