Inox Professional - Iron TERMOZETA - Free user manual and instructions

Product Type	Steam iron with separate boiler
Brand	Termozeta
Model	Inox Professional
Soleplate Material	Aluminium
Boiler Material	Stainless steel (Inox)
Power Consumption	2200 W (approx.)
Voltage	220-240 V ~ 50/60 Hz
Ironing Modes	Steam ironing, dry ironing
Temperature Settings	3 levels (low: synthetics, medium: silk/wool, high: cotton/linen)
Steam Control	Variable steam knob on boiler
Continuous Steam Function	Yes, with sliding cursor on iron handle
Steam Jet Function	Yes, button on iron
Water Level Indicator	LED (no-water indicator) on boiler
Steam Ready Indicator	LED on boiler
Thermostat Indicator	Light on iron (goes off when temperature reached)
On/Off Switches	Separate for iron and boiler
Safety Features	Earthed plug, do not immerse, do not use with bare feet or wet hands
Maintenance	Clean soleplate with damp sponge; do not use abrasive cleaners
Repair	Contact authorized Termozeta service center
Dimensions	Iron: approx. 30 x 12 x 15 cm; Boiler: approx. 20 x 15 x 25 cm (estimated)
Weight	Iron: approx. 1.2 kg; Boiler: approx. 2.4 kg (estimated)

Frequently Asked Questions - Inox Professional TERMOZETA

How do I fill the boiler with water?

Always unplug the iron first. Unscrew the boiler cap counterclockwise, slowly pour tap water into the opening, and screw the cap back on clockwise. Never add detergents or chemical additives.

How do I start ironing with steam?

Place the iron on the boiler support base. Set the iron temperature to the steam zone. Plug in, then press the iron on/off button (I) and the boiler on/off button (I). Wait until both indicator lamps go out. Press the steam button on the iron to release steam.

How do I adjust the amount of steam?

Use the steam control knob on the boiler. Turn clockwise for more steam, counterclockwise for less steam.

How do I use the continuous steam function?

Press the steam jet button and simultaneously slide the cursor on the iron handle towards the handgrip. To stop continuous steam, slide the cursor in the opposite direction.

What does the no-water LED mean?

The no-water LED (4b) lights up when the boiler needs refilling. Follow the procedure: switch off the boiler button, press the steam button to empty remaining steam, unplug, let cool, then unscrew the cap and refill.

Can I use the iron for dry ironing?

Yes. Set the temperature as needed, press the iron on/off button, and do not press the steam button. The iron will heat up and can be used dry.

How do I clean the iron?

Always unplug and let cool. Clean the aluminium soleplate with a damp sponge or non-metallic scouring pad for tough stains. Wipe the body with a damp cloth. Never submerge the iron or boiler in water.

What should I do if no steam comes out?

Check if the boiler is empty (no-water LED may be on). Also ensure the boiler button is on and the iron temperature is set to the steam zone. If still no steam, contact the service center.

Can I use any type of water?

Use regular tap water. Do not use detergents, perfumed substances, chemical additives, or water softeners. These can damage the appliance.

How do I store the iron after use?

Switch off both buttons, empty remaining steam by pressing the steam button, unplug, let cool completely, rest the iron on the support base, and store in a dry place.

USER MANUAL Inox Professional TERMOZETA

Line drawing of a steam iron with handle and control knob (no text or symbols)

ITALY

TERMOZETA®

DESCRIZIONE

A CORPO CALDAIA

1. Body of steam boiler

2. Steam control knob

3. Iron on/off button with indicator lamp

4. Boiler on/off button with indicator lamp

4.a Vapour ready LED

4.b No-water LED

1. Iron support base

2. Non-slip rubber tips for iron

3. Boiler cap

4. Iron-boiler connecting tube

5. Cord

B IRON

1. Iron

2. Soleplate

3. Steam spray button

12.b Cursor for continuos steam

1. Temperature control indicator

2. Temperature control knob

3. Thermostat indicator lamp

C

1. Steam ironing

2. Steam ironing with high temperature ironing – Cotton – Linen

3. Medium temperature ironing - Silk - Wool

4. Low temperature ironing – Nylon – Rayon – other synthetic fibres

ITALIANO

• The symbol of the crossed out dustbin shown on the device shows that the product, at the end of its useful life, having to be treated separately from domestic waste, must be disposed of in special waste collection for electric and electronic equipment.
• For more detailed information regarding the available waste disposal services, contact the waste disposal unit at your local council.
• Appropriate separate waste disposal which allows the device to be recycled, for compatible environmental treatment and disposal contributes to limiting negative effects on the environment and health and favours recycling of the materials which make up the product.

FRANÇAIS

Termozeta is an international trademark. Copyright © 1995. All rights reserved.

DESCRIPTION

Termozeta is an international trademark. Copyright © 1995. All rights reserved.

Termozeta is an international registered trademark. Copyright 1995. All rights reserved.

sobre la plancha.

• Please read this handbook as it gives important instructions and precautions about safety, use and maintenance of your appliance and keep it carefully for future reference.
• Make sure the appliance is in good condition when you unpack it. In case of doubt do not use it and contact a TERMOZETA authorized Service Centre.
• Do not leave parts of packaging (plastic bags, foam polystyrene, nails, etc.) within reach of children or incapable persons as they are potential sources of danger.
• The electrical safety of this appliance is only assured if it has been connected correctly to an efficient earthed system as provided by electricity safety norms presently in force. Termozeta shall not be held liable for eventual damages deriving from failure to connect the electrical installation to an earthed system.
• Make sure the data on the appliance rating plate corresponds to that of the main power supply and of your electrical system before plugging into the outlet. In case of doubt, contact professionally qualified personnel.
• It is not advisable to use adapters, multiple plugs and extensions. Use devices certified and conforming to existing safety standards only should it be absolutely necessary, making sure they are compatible with your electrical system and with the appliance technical data.
• Any installations not conforming to instructions may endanger your safety and forfeit the guarantee.
• The appliance is exclusively designed for domestic use for ironing fabrics.
• For safety's sake be careful:
• not to use the appliance with bare feet or wet hands or feet
• not to use the appliance away from home
• not to leave the appliance exposed to atmospheric agents (sun, rain ...)
• not to let children or incapable persons use the appliance
• never to tug on the lead or the appliance itself to unplug from the outlet
• not to leave the appliance plugged into the main power supply unattended
• never to submerge the appliance in water or in other liquids.
• The user must not replace the appliance lead. Contact a TERMOZETA authorized Service Centre or professionally qualified person in case of need.
• Switch off and do not mishandle the appliance if it should break down and/or work badly. Contact a TERMOZETA authorized Service Centre for eventual repairs asking for original spare parts.
• Put the appliance out of service at the end of its service life by cutting off the lead after unplugging from the outlet. Abide by local existing rules and regulations for its disposal.
• Termozeta may not be held liable for eventual damages to persons, animals or objects caused by incorrect installation or deriving from improper, erroneous or unreasonable use.

INSTRUCTIONS FOR USE

ADJUSTING TEMPERATURE OF THE IRON

- Turn the temperature control knob (14) of the iron so that the indicator (13) points to the temperature suited to the type of fabric you want to iron (see table in fig. C).

FOR STEAM IRONING

HOW TO FILL THE BOILER WITH WATER

WARNING: PUSH AND KEEP THE BOILER CAP SIDES TO THE CENTRE TO SCREW/UNSCREW IT.

• Always unplug the iron from the outlet when doing this.
- Rest the appliance on a firm flat surface before using it.
- Unscrew the cap (7) in anticlockwise direction and slowly pour the water through the boiler opening. Screw up the cap again in clockwise direction.

WARNING!

Use running water to fill the boiler only: never add detergents, perfumed substances, chemical additives or water softeners.

HOW TO START

• Place the iron on the boiler support base (5).
• Turn the iron temperature control knob (14) to "steam ironing" (see table in fig. C).
  • Completely unwind the cord (9) and plug into outlet.
• Press the on/off button on the iron (3) taking it to "ON" (I): the integrated control indicator lamps up and stays on until the button is switched to off.
• The indicator lamp (15) on the iron will come on immediately and will go out a few minutes after reaching the required temperature.
• Press the on/off button (4) on the boiler taking it to "ON" (I): the integrated control indicator will light up to indicate that the water in the boiler is warming up. The appliance is ready to be used when the lamp of the boiler button (4) goes out.
• The lamp of the boiler button (4) will light up and go off automatically while ironing to show that the pressure in the boiler is under constant control.

WARNING!

Never unscrew the boiler cap (7) while the appliance is working.

IRONING

• Press button (12) on the iron for the steam jet: the steam will stop coming out when you release the button.
• To use the continuous steam function, press the steam output key (12) and at the same time slide the cursor (12.b) towards the handgrip. To turn this function off, slide the cursor (12.b) in the opposite direction to the handrigp.
• The indicator light (15) on the iron will light up and go off automatically while ironing to show that the soleplate is being kept at a constant temperature.
• Rest the iron on the boiler support base (5) during intervals between ironing.
• Use the steam control knob (2) if you want to set the amount of steam needed for ironing: to get more vapour, rotate the handle clockwise; for less vapour rotate it counterclockwise.
• With the iron held upright at a distance of 10/12 cm you can use the jet

of steam to smooth out creases and freshen up materials while they are hanging.

• Before ironing delicate fabrics it is best to make trial run on a hidden piece e.g. the hem.
  • We advise you to iron materials needing low temperatures first then go on to more resistant materials, needing higher temperatures, afterwards.

WARNING!

• Some drops of water may leak out of the iron soleplate (11) when the jet of steam starts coming out; this is quite normal and is due to condensation forming inside the iron-boiler connecting tube. This will disappear with the next jet of steam. It is therefore best not to point the first jet of steam directly onto the item to be ironed.
• Never leave the iron unattended with the plug in the outlet when you are ironing.

NO MORE WATER WHILE IT IS BEING USED

The jet of steam becomes less and finally disappears if there is no more water.

The LED (4b) switches on to inform that the boliler has to be filled up again.

Carefully follow the instructions given below to fill up the heater again:

• switch off the on/off boiler button (4) by turning it to "OFF" (O); the integrated control indicator lamp will go off;
• press button (12) on the iron, until the boiler is completely empty and no more steam is being produced;
• switch off the on/off button on the iron (3) by turning it to "OFF" (O) the integrated control indicator lamp will go off;
• unplug the plug from the outlet;
• slowly unscrew the boiler cap (7) in an anticlockwise direction being careful of any eventual residual steam;
• fill up the boiler following instructions given in the "How to fill the boiler with water" paragraph;
• switch on the appliance again following the same instructions given in the "How to start" paragraph.

WARNING!

Always unplug the iron from the outlet before filling the boiler with water.

WHEN YOU HAVE FINISHED IRONING

• Switch off the boiler on/off button (4) by turning it to "OFF" (O).
• Empty out all the steam left in the boiler by pressing button (12) on the iron.
• Switch off the on/off button (3) on the iron by turning it to "OFF" (O).
  • Unplug the plug from the outlet.
• Rest the iron on the support base (5) and wait for the appliance to completely cool down before putting it away.

WARNING!

Never unscrew the boiler cap (7) without emptying out all the steam from the boiler.

FOR DRY IRONING

• Rest the iron on the boiler support base (5).
• Select the right temperature (see table in figure C) by turning the control knob on the iron.
  • Completely unwind the cord (9) and plug into the outlet.
• Press the on/off button on the iron (3) taking it to "ON" (I) the integrated

ENGLISH

control indicator lamp will light up and will stay on until the button has been switched off.

• The indicator lamp (15) on the iron will immediately light up. The iron has reached the set temperature and is ready to be used when the indicator lamp (15) goes out.
• Do not press the steam jet button (12) on the iron if you want to dry iron.
• The indicator lamp (15) on the iron will light up and go off automatically while you are ironing to show that the soleplate is being kept at a constant temperature.

CLEANING YOUR IRON

• Always unplug the iron from the outlet and wait for the appliance to completely cool down before starting any cleaning operations.
- Use a normal damp sponge to clean the aluminium soleplate, or else a non-metallic kitchen scouring-pad for difficult stains.
- Use a damp cloth to clean the rest of the iron and body of the boiler only.
- Never submerge the appliance or parts of it into water or other liquid, do not use steam, chemical or abrasive substances.

TABLE FOR CHECKING IF YOU HAVE ANY PROBLEMS

PROBLEMS	ACTION
The appliance is not working	Make sure the plug is plugged into the outletMake sure there are no problems with the mains
The on/off buttons are not working	Press the buttons correctly
The iron is not working	Make sure the temperature control knob is in the right position
The appliance stops working while it is plugged into the mains	Call the Service Centre
The ON buttons on the boiler fail to light up while the appliance is plugged into the mains	Call the Service Centre
The appliance fails to produce steam while it is on	Call the Service Centre

Termozeta S.p.A. reserves the right to introduce technical and/or aesthetic changes to its products intended to improve performances.

Termozeta is an international trademark. Copyright © 1995. All rights reserved.

DEUTSCH

Termozeta is an international trademark. Copyright © 1995. All rights reserved.

Termozeta is an international trademark. Copyright © 1995. All rights reserved.