DS-2TP31B-3AUF - Camera Hikvision - Free user manual and instructions

Product Type	Handheld Thermal Camera
Brand	Hikvision
Model	DS-2TP31B-3AUF
Dimensions	Approximately 200 mm x 80 mm x 60 mm
Weight	Approximately 500 g (including battery)
Power Supply	Rechargeable Li-ion battery, 5V DC via USB-C
Battery Life	Up to 6 hours continuous operation
Display Type	3.2-inch color LCD touchscreen
Infrared Resolution	160 x 120 pixels
Temperature Range	-20°C to 550°C
Accuracy	±2°C or ±2% of reading
Main Functions	Thermal imaging, temperature measurement, image capture, video recording, Wi-Fi connectivity
Storage	Internal memory (8 GB) and microSD card slot (up to 128 GB)
Connectivity	Wi-Fi 802.11 b/g/n, USB-C
Cleaning and Maintenance	Clean lens with soft, dry cloth; avoid solvents
Safety Precautions	Do not point laser directly at eyes; avoid extreme temperatures
Spare Parts and Repairability	Battery and USB cable replaceable; device not user-serviceable internally
Warranty	2 years (standard)
General Information	Designed for building inspection, electrical maintenance, and HVAC diagnostics

Frequently Asked Questions - DS-2TP31B-3AUF Hikvision

How do I turn on the DS-2TP31B-3AUF camera?

Press and hold the power button located on the top of the camera for about 3 seconds until the display turns on.

How can I capture a thermal image?

Ensure the camera is in imaging mode, then press the capture button on the front. The image will be saved to the internal memory or microSD card.

What is the temperature measurement range?

The camera measures temperatures from -20°C to 550°C with an accuracy of ±2°C or ±2% of reading.

How do I transfer images to a computer?

Use the USB-C cable to connect the camera to your computer. It will appear as a removable drive. Alternatively, remove the microSD card and use a card reader.

Can I connect the camera to a smartphone?

Yes, download the Hikvision Thermal app and connect via Wi-Fi. Enable Wi-Fi on the camera from the settings menu.

How do I clean the lens?

Gently wipe the lens with a soft, lint-free cloth. Do not use any liquids or abrasive cleaners.

Why is the battery not charging?

Ensure the USB cable is properly connected to both the camera and a power source. Try a different cable or power adapter. If the issue persists, the battery may need replacement.

What does the error message 'Over Range' mean?

This indicates the object temperature is above the maximum measurement limit of 550°C. Point the camera away from extremely hot sources.

How to reset the camera to factory settings?

Go to Settings > System > Factory Reset. Confirm the action. All user data will be erased.

Is the camera waterproof?

The camera is not waterproof. It is designed for indoor and dry outdoor use. Avoid exposure to rain or moisture.

USER MANUAL DS-2TP31B-3AUF Hikvision

Thermographic Handheld Camera

User Manual

© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only.

The informaon contained in the Manual is subject to change, without noce, due to rmware updates or other reasons. Please nd the latest version of this Manual at the Hikvision website (hp://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement

- HIKVISION and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons.

- Other trademarks and logos menoned are the properes of their respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residential installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operaon

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU.

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collecon points. For more informaon see: www.recyclethis.info.

2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentaon for speci baery informaon. The baery is marked with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated collecon point. For more informaon see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operaon of the device.

Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce potenal radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communicaon.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

The symbols that may be found in this document are dened as follows.

Symbol	Descripon
	Provides additional informaon to emphasize or supplement important points of the main text.
	Indicates a potentially hazardous situaon, which if not avoided, could result in equipment damage, data loss, performance degradaon, or unexpected results.
	Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury.

Safety Instrucons

These instrucons are intended to ensure that user can use the product correctly to avoid danger or property loss.

Laws and Regulaons

- Use of the product must be in strict compliance with the local electrical safety regulaons.

Transportaon and Storage

- Keep the device in original or similar packaging while transporng it.

- Keep all wrappers aer unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportaon without the original wrapper may result in damage on the device and the company shall not take any responsibilities.

- Do not drop the product or subject it to physical shock. Keep the device away from magnec interference.

Power Supply

- Please use the power adapter, which is provided by normal company. Input voltage should meet the Limited Power Source (5 VDC, 2A) according to the IEC61010-1 standard. Please refer to technical speciaons for detailed informaon.

- Make sure the plug is properly connected to the power socket.

- DO NOT connect mulple devices to one power adapter, to avoid over-heang or re hazards caused by overload.

Baery

- Improper use or replacement of the baery may result in explosion hazard. Replace with the same or equivalent type only. Dispose of used baeries in conformance with the instrucons provided by the baery manufacturer.

- Do not charge other baery types with the supplied charger. Conrm there is no ammable material within 2 m of the charger during charging.

- For long-term storage of the baery, make sure it is fully charged every half year to ensure the baery quality. Otherwise, damage may occur.

• DO NOT place the baery near heang or re source. Avoid direct sunlight.

• DO NOT swallow the baery to avoid chemical burns.

• DO NOT place the baery in the reach of children.

Maintenance

• Clean the lens with so and dry cloth or wiping paper to avoid scratching it.
• Wipe the device gently with a clean cloth and a small quantity of ethanol, if

necessary.

• If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
• A few device components (e.g., electrolyc capacitor) require regular replacement. The average lifespan varies, so periodic checking is recommended. Contact your dealer for details.

Using Environment

• DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp environments. Make sure the running environment meets the requirement of the device. The operang temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and the operang humidity shall be 90% or less.
• This device can only be safely used in the region below 2000 meters above the sea level.
• Avoid equipment installaon on vibratory surface or places subject to shock (neglect may cause equipment damage).
• Do not aim the lens at the sun or any other bright light.

Emergency

- If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the power cable, and contact the service center.

Manufacture Address

No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Hangzhou Hikvision Digital Technology Co., Ltd

User Manual of Electrical Version

Scan the QR code to view the user manual on your mobile phone. Note that mobile data charges may apply if Wi-Fi is unavailable.

Table of Contents

1 Overview ....1

1.1 Device Descripon 1
1.2 Main Funcons.... 1
1.3 Appearance.... 3

2 Preparaon....4

2.1 Charge Device 4
2.1.1 Charge Device via Cable Interface.... 4
2.1.2 (Oponal) Charge Device via Charging Base 4
2.2 Power On/Off 7
2.2.1 Set Auto Power-o Duraon 7
2.3 Operaon Methods....7
2.4 Menu Descripon 8

3 Display Sengs....9

3.1 Focus Lens 9
3.2 Set Screen Brightness 10
3.3 Set Display Mode 10
3.4 Set Palees 11
3.5 Adjust Digital Zoom 12
3.6 Display Device Status 12
3.7 Display Date and Time.... 13

4 Temperature Measurement....13

4.1 Set Thermography Parameters 13
4.1.1 Set Units 15
4.2 Set Temperature Dherence/Range 15
4.3 Set Thermography Rule 16
4.3.1 Set Point Rule.... 17
4.3.2 Set Line Rule 17
4.3.3 Set Frame Rule 18
4.3.4 Delete Rules.... 19

4.4 Set Black Body Temperature Calibraon 19

4.4.1 Auto Calibraon 19

4.4.2 Manual Calibraon 20

4.5 Set Temperature Alarm.... 21

5 Picture and Video 22

5.1 Capture Picture 22
5.2 Record Video.... 24
5.3 View Recorded Files....24
5.4 Export Files 25

6 Connect Bluetooth 26

7 Hik-Thermal APP Connecon 26

7.1 Connect via Wi-Fi 26
7.2 Connect via Hot Spot.... 27

8 Maintenance....28

8.1 View Device Informaon 28
8.2 Upgrade Device 28
8.3 Restore Device.... 29

9 Appendix....29

9.1 Common Material Emissivity Reference 29
9.2 Device Command.... 30
9.3 Device Communicaon Matrix 30
9.4 Frequently Asked Quesons (FAQ) 31

1 Overview

1.1 Device Descripon

The thermographic handheld camera is a device with both opcal images and thermal images. It can realize thermography, video recording, snapshot capturing, alarm. It can connect to Wi-Fi, hotspot, and Bluetooth. The built-in high-sensitivity IR detector and high-performance sensor detect the variaon of temperature and measure the real-me temperature.

The picture-in-picture technique of the thermography camera and the fusion of opcal view and thermal view enhances the details of the images display. It supports mulple palees and alarm types. When the detected temperature in the scene does not match with the alarm rules, the device alarms by color of the palee mode automacally. It helps to nd the risky part and lower your property loss. The device supports Wi-Fi conncon, live view, recording, and capturing, etc.

The device is easy to use, and adopts ergonomic design. It is widely applied to substaons, electricity prevenon detecon of companies, and reconnaissance survey of construcon eld.

1.2 Main Funcons

Thermography

Device detects the real-me temperature, and displays it on the screen.

Storage

Device is equipped with memory module to store videos, snapshots, and important data.

Fusion

Device can display fusion of thermal view and opcal view.

Palee and Alarm

Device supports mulple palees, and you can set the palee mode according to the alarm funcon.

Client Soware Connecon

You can connect the device with Hik-Thermal APP via Wi-Fi or hot spot to view live view, capture, and recording, etc. on your phone.

You can connect the device with iVMS-4800 to analyze the thermography pictures captured by devices.

Bluetooth

Device can be connected to headset via Bluetooth, and you can hear the sound in the recording or capture.

Digital Zoom

Device supports 1×, 2×, and 4× digital zoom.

1.3 Appearance

Component	Funcon
Laser Buon	Reserved.
Navigaon Buon	Menu Buon:- Press ∇, Δ, ▷, and ◀ to select parameters.- Press OK to conrm.
	Non-Menu Buon:- Reserved.- Hold ∇ to realize digital zoom.
Lens Sheet Buon	Covers the lens to perform the correcon.
Back Buon	Exits the menu or return to previous menu.
Focus Knob	Adjusts lens focal length. Refer to 3.1 Focus Lens.
Trigger	Pulls the trigger to record videos or capture snapshots.
Cable Interface	Connects the device to your PC via cable to export les.

2 Preparaon

2.1 Charge Device

2.1.1 Charge Device via Cable Interface

Before you start:

Please make sure the baery is installed before charging.

Steps:

1. Open the top cover of the device.
2. Connect the interface and the power adaptor with Type-C cable.

2.1.2 (Oponal) Charge Device via Charging Base

Before you start:

You need to purchase charging base.

Steps:

1. Hold the device, and press both battery lock catches of the device. See gure below.

1. Hold the lock catches, and draw the baery base to take out the baery. See gure below.

Illustration of hands using a tool to adjust or install a mechanical component, with an orange arrow indicating direction (no text or symbols present)

1. Insert the battery into the charging base. See gure below.

You can see the charging status via the pilot lamp on the charging base.

1. When the baery is fully charged, draw the baery from the charging base.

2. Align the ribbed piece on battery with the notch of the device, and insert baery into the device. See gure below.

2.2 Power On/O

Power On

Remove the lens cover, and hold the ☐on for over three seconds to turn on the device. You can observe the target when the interface of the device is stable.

NOTE

It may take at least 30 s until the device is ready for using when you power on it.

Power O

When the monocular is turned on, hold the uon for three seconds to power o the device.

2.2.1 Set Auto Power-o Duraon

Go to Local Sengs ( Device Setngs > Auto Power-o Duraon Sengs to set the automac shutdown me for device as required.

2.3 Operaon Methods

The device supports both touchscreen control and buon control.

Touchscreen control

Tap on the screen to congregate the device.

Line drawing of a handheld electronic device with a hand pointing to the screen (no text or symbols)

Buon control

Press the navigaon buons to conjure the device.

Line drawing of a handheld electronic device with a hand adjusting its control panel (no text or symbols visible)

- Press the , , , and to move the cursor up/down/right/left.

- Press OK to conrm.

2.4 Menu Descripon

In the observaon interface, tap the screen or press OK to show the menu bar. See gure below.

3 Display Sengs

3.1 Focus Lens

Before you start:

Adjust the lens focal length properly before any other conguraon, or it may act the image display and temperature accuracy.

Steps:

1. Power on the device.

2. Aim the device lens to the appropriate scene.

3. Adjust the focus knob clockwise or anclockwise. See gure below.

DO NOT touch the lens to avoid aecng the display eect.

3.2 Set Screen Brightness

Go to Local Sengs ( Device Sengs > Display Brightness to set the screen brightness. It can be set as Low, Medium, or High.

3.3 Set Display Mode

Purpose:

You can set the thermal/opcal view of the device. Thermal, Fusion, PIP, and Opcal are selectable.

Steps:

1. Select the Thermal/Opcal Sengs ( ) from the main menu.

1. Tap the icons to select a view mode.

Icon	Mode	Descripon
	Thermal	In thermal mode, the device displays the thermal view.
	Fusion	In fusion mode, the device displays the combined view of thermal channel and opcal channel.You can tap in live view and press ▷ and ◀ to adjust fusion level. Or you can adjust it in Sengs > Image Sengs > Fusion Level.
	PIP	In PIP (Picture in Picture) mode, the device displays thermal view inside the opcal view.You can tap in live view and press ▷ and ◀ to adjust PIP proporon. Or you can adjust it in Sengs > Image Sengs > PIP proporon.
	Opcal	In opcal mode, the device displays the opcal view.

1. Press to exit.

3.4 Set Palees

Purpose:

The palees allow you to select the desired colors.

Steps:

1. Select from the main menu.

1. Tap the icons to select a palee type.

Icon	Palee	Descripon
	White Hot	The hot part is light-colored in view.
	Black Hot	The hot part is black-colored in view.
	Rainbow	The target displays mulple colors. It's suitable for scene without obvious temperature dience.
	Ironbow	The target is colored as heated iron.
	Red Hot	The hot part is red-colored in view.
	Fusion	The hot part is yellow-colored and the cold part is purple-colored in view.
	Rain	The hot part in the image is colored, and the else is blue.

1. Press to exit the seng interface.

3.5 Adjust Digital Zoom

In the live view interface, press ▽ to adjust the digital zoom to 1×, 2×, or 4×. Then you can view the target or scene in larger size.

3.6 Display Device Status

Go to Local Sengs ( Image Setngs > Display Sengs to enable the status icons display. Then you can view the device status in live view interface.

3.7 Display Date and Time

Go to Local Sengs ( ) Image Setngs > Display Sengs to enable the date and me display. Then you can view the date and me informaon in live view interface.

4 Temperature Measurement

Purpose:

The thermography (temperature measurement) funcon provides the real-me temperature of the scene and displays it on the le of your screen. The thermography funcon is turned on by default.

4.1 Set Thermography Parameters

Purpose:

The thermography parameters aect the accuracy of temperature measurement.

Steps:

1. Select Local Sengs ( ) from the main menu.
2. Select Thermography Setngs.

Set thermography range, emissivity, distance, background temperature, reecon temperature, humidity, and black body temperature calibraon.

● Thermography Range

Select the thermography range. The device can detect the temperature and switch thermography range automacally in Auto Switch mode.

- Emissivity

Set the emissivity of your target as the eecveness in eming energy as thermal radiaon.

i NOTE

Refer to the 9.1 Common Material Emissivity Reference for Emissivity values.

Go to Local Sengs ( Image Setngs > Display Sengs to enable/disable the emissivity display.

- Distance

The straight-line distance between the target and the device. You can customize the target distance according to your needs.

● Background Temperature

The average temperature of the environment.

- Reecon Temperature

If any object (not the target) of high temperature is in the scene, and the target emissivity is low, set the reecon temperature as the high temperature to correct the thermography eect.

- Humidity

Set the relave humidity of current environment.

● Black Body Temperature Calibraon

Use this funcon to improve temperature measurement accuracy.

1. Return to previous menu to save the sengs.

4.1.1 Set Units

Go to Local Sengs > Device Sengs > Unit Setngs to set the temperature unit and distance unit.

You can go to Local Setngs > Image Sengs > Display Setngs to enable/disable the temperature unit display.

4.2 Set Temperature Dherence/Range

Purpose:

Set a temperature secon and the palee only works for targets within the temperature secon. You can adjust the temperature range and set the temperature dience.

Steps:

1. Select Range () from the main menu.

1. Select Auto (↑↑) adjustment or Manual (↓).

Auto Adjustment:

1) Select Auto (iH).
2) Press OK to conrm. The device adjusts temperature dience and temperature range parameters automacally.

Manual Adjustment:

1) Select Manual (↓).
2) Press OK to conrm. The color-temperature bar displays.
3) Press ▷ to enlarge the temperature secon range (e.g. temperature range changes from 20^ - 40^ to 19^ - 41^ ), or press ◀ to narrow the temperature range.
4) Press to move the temperature secon higher (e.g. temperature range changes from 20^ - 40^ to 30^ - 50^ ), or press to lower the temperature secon.

1. Press to exit.

4.3 Set Thermography Rule

Purpose:

The thermography parameters aect the accuracy of temperature measurement.

Steps:

1. Select Thermography Rule Conguraon ( ) from the main menu.

2. Set the point, line, or frame rules. See gure below.

4.3.1 Set Point Rule

You can set Center Point Thermography, High-Temperature Point, Low-Temperature Point, and Custom Point Thermography.

● Center Point Thermography

System detects the temperature of the center.

Tap and the temperature (center of view) displays Cen: XX.

● High-Temperature Point

System locates the point of the highest temperature.

Tap and the temperature (Highest temperature of view) displays Max: XX.

● Low-Temperature Point

System locates the point of the lowest temperature.

Tap and the temperature (Lowest temperature of view) displays Min: XX.

- Custom Point Thermography

System detects the temperature of a custom point.

Steps:

1. Choose on the interface.

2. Press OK.

3. Move the point with the navigaon buons or tap on the touch-screen to select a point.

4. Press OK to conrm. The temperature of custom point (e.g. P1) displays P1: XX.

5. Repeat step 1 to 3 to set other custom points.

At most ten custom points supported.

4.3.2 Set Line Rule

Steps:

1. Choose on the interface.
2. Press OK to generate a default line.
3. Press the , , , and to move the line up/down/le/right.
4. Drag points of the line on the touch-screen to extend or shorten the line.
5. Press OK. The Max. Temperature, Low Temperature, and Average Temperature of line (e.g. L1) displays L1 Max: XX Min: XX Avg: XX. The real-me temperature trend chart will display.

NOTE

Only one line supported.

4.3.3 Set Frame Rule

Steps:

1. Choose on the interface.
2. Press OK to generate a default frame.
3. Press the , , , and to move the frame up/down/right/left.
4. Press to enlarge the frame, and press to contract the frame. Or you can drag the corner of the frame on touchscreen to enlarge or contract the frame.
5. Press OK. The Max. Temperature, Low Temperature, and Average Temperature of frame (e.g. S1) displays S1 Max: XX Min: XX Avg: XX.
6. Repeat step 1 to 5 to set other frames.

NOTE

At most three frames supported.

4.3.4 Delete Rules

Tap and press OK to clear all temperature rules.

Or tap 📁 and choose the single rule you want to delete to delete it.

4.4 Set Black Body Temperature Calibraon

You need to purchase black body according to your need. Skip this step if the device is not equipped with black body.

If black body is installed around the device, seng the black body temperature calibraon can improve the temperature measurement accuracy.

Go to Setngs > Local Sengs > Thermography Sengs > Black Body Temperature Calibraon > Calibraon Mode. Both auto calibraon and manual calibraon are selectable. You can also turn this funcon o.

4.4.1 Auto Calibraon

Steps:

1. Press the and to select Auto and press OK to start auto calibraon.

1. Press the and or tap the screen to aim the calibraon point at the black body.
2. Press OK to complete calibraon.

4.4.2 Manual Calibraon

Steps:

1. Press the and to select Manual and press OK to start manual calibraon.

1. Aim the device at the black body and press OK to complete calibraon.

4.5 Set Temperature Alarm

Before you start:

Go to Palees Sengs (

set the palee.

Purpose:

Set the alarm rules and the device will alarm when the temperature triggers the rule.

Steps:

1. Go to Palees Sengs (

om the main menu.

1. Tap on the icons to select an alarm rule type.

2. (Oponal) Press the and to select between upper limit and lower limit.

3. Press the ◀ and ▶ to adjust the rule temperature.

Icon	Alarm Mode	Descripon
	Above Alarm	Set the alarm temperature, and the device alarms when target temperature is higher than rule temperature.
	Below Alarm	Set the alarm temperature, and the device alarms when target temperature is lower than rule temperature.
	Interval Alarm	Set the alarm temperature secon (e.g., 90 °C to 150 °C), when target temperature is within the secon (e.g., 100 °C), the
		device alarms.
	Insulaon Alarm	Set the alarm temperature secon (e.g., 90 °C to 120 °C), when target temperature is without the secon (e.g., 70 °C or 125 °C), the device alarms.

1. Press to exit.

NOTE

Go to Local Sengs > Image Sengs > Audible Warning. Tap on to enable audible warning. The device will sound when alarm is triggered.

5 Picture and Video

Before you start:

Insert memory card into the device, then you can record videos, capture snapshots, and mark and save important data.

NOTE

• Device does not support capturing or recording when the menu is shown.
• When the device is connected to your PC, it does not support capturing or recording.
• Go to Local Sengs > Device Sengs > Filename Header. You can set the lename header for capturing or recording to disnguish the les recorded in a specify scene.

5.1 Capture Picture

NOTE

You can set the Flashlight Seng ON/OFF if required.

Go to Local Sengs > Image > Picture Resoluon to set the resoluon of opcal image if required.

Steps:

1. Select Local Sengs ( ) from the main menu.
2. Go to Local Sengs > Camera Sengs > Trigger Sengs.
3. Select Capture.

4. Press OK.

5. Press to exit.

6. In the live view interface, pull the trigger to capture snapshot.

1. The live view freezes and device displays the snapshot eding interface.

1) Set text remark or voice remark.

- Tap to add text remarks. Tap the screen to show the keypad interface, enter the comment and conrm.

- Tap to add voice remarks. Hold OK to start recording and release the buon to stop recording.

2) Add thermography data.

- Tap to add thermography rules. Refer to 4.2 Set Thermography Rule for details.

3) Tap or pull the trigger to save the snapshot.

NOTE

You can also press to quit the saving.

1. Refer to 5.4 Export File to export the snapshots.

NOTE

In the menu interface, you can pull the trigger to exit, and pull the trigger again to capture snapshot.

5.2 Record Video

Steps:

1. Select Local Sengs ( ) from the main menu.
2. Go to Local Sengs > Camera Sengs > Trigger Setngs.
3. Select Record.
4. Press OK.

You can set the Flashlight Seng ON/OFF if required.

1. Press to exit.
2. In the live view interface, pull the trigger to start recording. The recording icon and count down number display in the interface.

1. When you nish, pull the trigger again to stop recording. The recording video will be saved automatically and exit.

You can also press OK or to stop recording.

1. Refer to 5.4 Export File to export the videos.

In the menu interface, you can pull the trigger to exit, and pull the trigger again to start recording.

5.3 View Recorded Files

Steps:

1. Select the Files (☐) from the main menu.

2. Press the , , , and to select the video or snapshot.

3. Press OK to view the le.

NOTE

- When you are viewing the videos or capturing snapshots, you can switch the le by tapping

• When you are viewing the snapshots, you can tap to play the sound. Refer to 6 Connect Bluetooth to set the Bluetooth.
• For more informaon contained in capture snapshots or videos, you can install the thermography client to analyse them. You can get the thermography client soware from the disk packed in box.

5.4 Export Files

Purpose:

Connect the device to your PC with supplied cable. You can export the recorded videos and captured snapshots.

Steps:

1. Open the cover of cable interface.
2. Connect the device to your PC with cable and open the detected disk.

3. View the videos and snapshots.

4. Select and copy the videos to PC and play the le with the player.

5. Select and copy the snapshots to PC and view the les.

6. Disconnect the device from your PC.

i NOTE

For the rst me conneccon, the driver will be installed automacally.

6 Connect Bluetooth

Purpose:

Aer pairing the device with bluetooth headsets successfully, you can record and hear the sound contained in the videos or images via bluetooth headsets

Steps:

1. Select Local Sengs ( ) from the main menu.

2. Go to Local Sengs > Device Sengs > Bluetooth.

3. Tap 🐘 Bluetooth to enable the bluetooth funcon. The device will search the nearby enabled bluetooth headsets and pair them automacally.

You can also press or OK to quit pairing.

Result:

Aer pairing you can record and hear the sound via the headsets while recording and playing the video or image.

7 Hik-Thermal APP Connecon

The device supports both Wi-Fi conncon and WLAN hot spot. Connect the device to Hik-Thermal client soware, and you can control the device via mobile client.

7.1 Connect via Wi-Fi

Before you start:

Download and install client soware on your phone.

Steps:

1. Go to Local Sengs > Device Sengs > Wi-Fi Setngs.

2. Tap on Connect to Wi-Fi to enable Wi-Fi, and the searched Wi-Fi will be listed below.

3. Select your Wi-Fi and enter password to show the keypad interface.

DO NOT tap enter or space, or the password may be incorrect.

1. Tap Close to hide the keypad.

2. Tap OK.

1. Launch the app and follow the startup wizard to create, and register an account.

2. Add the device to online devices.

Result:

You can view the live view, capture snapshots, and record videos via the client.

7.2 Connect via Hot Spot

Before you start:

Download and install client soware on your phone.

Steps:

1. Go to Local Sengs > Device Sengs > Wi-Fi Hotspot Sengs.

2. Tap on 🔒 Hot Spot to enable the WLAN hot spot funcon.

3. Tap Set Hot Spot to set the WLAN hot spot. The hot spot name and password display automacally.

4. Edit the hot spot name and password, show the keypad interface.

DO NOT tap enter or space, and at least 8 characters, or the password may be incorrect.

1. Tap Close to hide the keypad.

1. Connect your phone to the WLAN Hot Spot of the device.
2. Launch the app and follow the startup wizard to create, and register an account.
3. Select Wi-Fi conguraon in the soware, enter the serial number of device to add the device. Refer to the manual of client soware for details

Result:

You can view the live view, capture snapshots, and record videos via the client.

8 Maintenance

8.1 View Device Informaon

Go to Local Sengs ( ) > Device Informaon to view the device informaon: Model, Version No., FPGA Version No., Serial No., IP address, and so on.

8.2 Upgrade Device

Steps:

1. Connect the device to your PC with cable and open the detected disk.
2. Copy the upgrade le and paste it to the root directory of the device.

3. Disconnect the device from your PC.

4. Reboot the device and then it will upgrade automacally. The upgrading process will be displayed in the main interface.

Aer the upgrading, the device automacally reboots. You can view the current version in Local Sengs ( )>Device Informaon.

8.3 Restore Device

Go to Local Sengs ( ) > Device Sengs > Device Initialize to initialize the device and restore default sengs.

9 Appendix

9.1 Common Material Emissivity Reference

Material	Emissivity
Human Skin	0.98
PCB	0.91
Cement Concrete	0.95
Ceramics	0.92
Rubber	0.95
Paint	0.93
Wood	0.85
Asphalt	0.96
Brick	0.95
Sand	0.90
Soil	0.92
Coon	0.98
Cardboard	0.90
White Paper	0.90
Water	0.96

9.2 Device Command

Scan the following QR code to get device common serial port commands.

Note that the command list contains the commonly used serial port commands for Hikvision thermal cameras.

9.3 Device Communicaton Matrix

Scan the following QR code to get device communicaon matrix.

Note that the matrix contains all communicaon ports of Hikvision thermal cameras.

9.4 Frequently Asked Quesons (FAQ)

Q: Why is the charge indicator ashing red?

A: Examine the items below.

1. Examine whether the device is charged with the standard power adapter.
2. Plug and unplug the baery once.
3. Make sure the charging temperature is above 0^ C ( 32^ F).

Q: Device image is fuzzy. How to adjust it?

A: Refer to Focus Lens to adjust the focus knob clockwise or anclockwise.

Q: Why cannot the Wi-Fi be found?

A: Examine whether the Wi-Fi funcon is turned on. If not, refer to 7.1 Connect via Wi-Fi to turn on Wi-Fi.

Q: Capturing or recording fails. How to operate?

A: Examine the items below:

1. Whether the device is connected to your PC and disabled the capturing and recording.
2. Whether the storage space is full.
3. Whether the device is low-baery.

Q: Why cannot the PC recognize the device?

A: Examine whether the device is connected to your PC with standard cable.

See Far, Go Further