Acryl-it - DJ Equipment PRO-JECT - Free user manual and instructions

Product Type	Turntable Platter Upgrade
Brand	Pro-Ject
Model	Acryl-it
Compatible Turntables	Pro-Ject Debut, Debut Carbon, Xpression series
Material	Acrylic with satinized surface
Diameter	Approximately 12 inches (304.8 mm)
Weight	Approximately 1.5 kg (3.3 lbs)
Power Supply	None (passive component)
Main Function	Replace stock platter to reduce resonance and improve sound clarity
Sound Improvement	Liquid, free of platter resonances
Installation	Direct swap; no felt mat required
Care & Cleaning	Wipe with a soft, lint-free cloth; avoid abrasive cleaners
Safety	Handle with care to avoid scratches; ensure platter is properly seated before use
Spare Parts	Contact Pro-Ject or authorized dealers for replacement
Repairability	Not user-serviceable; replace if damaged
General Information	This upgrade brings your turntable to Esprit-standard performance

Frequently Asked Questions - Acryl-it PRO-JECT

What is the Pro-Ject Acryl-it?

The Pro-Ject Acryl-it is an upgrade platter made from acrylic that replaces the stock metal platter on select Pro-Ject turntables to reduce resonance and improve sound quality.

Which turntables are compatible with the Acryl-it?

The Acryl-it is compatible with Pro-Ject Debut, Debut Carbon, and Xpression series turntables.

How do I install the Acryl-it platter?

Simply remove your existing metal platter and place the Acryl-it on the spindle. No felt mat is required; you can place your record directly on the acrylic surface.

Does the Acryl-it require a felt mat?

No, unlike metal platters, the acrylic surface provides sufficient damping, so you can play records directly on the platter without a felt mat.

How does the Acryl-it improve sound quality?

The acrylic material absorbs vibrations better than metal, resulting in a more liquid sound with reduced platter resonances.

How do I clean the Acryl-it platter?

Use a soft, lint-free cloth slightly dampened with water. Avoid harsh chemicals or abrasive materials that could scratch the surface.

Is the Acryl-it heavy?

The platter weighs approximately 1.5 kg (3.3 lbs), which is similar to or slightly heavier than the stock metal platter.

Will the Acryl-it fit my turntable if I have a different model?

The Acryl-it is designed specifically for Debut, Debut Carbon, and Xpression models. It may not fit other turntables without modification. Check compatibility before purchasing.

Can I use the Acryl-it with a record clamp?

Yes, you can use a record clamp designed for acrylic platters. Ensure the clamp does not damage the surface.

What should I do if the Acryl-it gets scratched?

Minor surface scratches can be buffed with a plastic polish. Deep scratches may affect performance; consider replacing the platter if needed.

USER MANUAL Acryl-it PRO-JECT

Acrylic turntable platter

Red and white photo of a red circular radio with a white disc, showing mechanical components (no text or symbols visible)

Top-down view of a white oval plate with a small central droplet (no text or symbols)

Upgrade your Pro-Ject Debut, Debut Carbon, or Xpression turntable to "Esprit"-standards with the Acryl it platter. Acryl it is made from acrylic with a satinized surface and brings a more liquid sound that's free of platter resonances.

Acryl it is easy to use. Just exchange your stock metal platter for Acryl it. Unlike metal platters, which require a felt met between the record and the platter to damp metal resonance, you can put your record directly on the acrylic surface, with nothing in between.

Acryl it improves overall performance significantly!