SHFGLC11 - Loudspeaker Sandstrøm - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Sandstrøm
Model	SHFGLC11
Dimensions (W x H x D)	22.5 x 10.5 x 10.0 cm
Weight	950 g
Power Supply	Built-in rechargeable battery, DC 5V via USB-C
Battery Life	Up to 12 hours at 50% volume
Charging Time	Approximately 3 hours
Bluetooth Version	5.0
Wireless Range	Up to 10 meters
Speaker Configuration	2x 52mm full-range drivers, passive radiator
Output Power	20W RMS
Frequency Response	80 Hz - 20 kHz
Water Resistance	IPX5
Hands-free Calling	Yes, with built-in microphone
Audio Input	3.5mm AUX, USB-C (charging only), microSD card (optional)
Controls	Power, Volume +/-, Play/Pause, Bluetooth pairing, LED indicator
Cleaning Instructions	Wipe with a soft, dry cloth. Avoid using liquids or abrasives.
Storage Conditions	Store in a cool, dry place out of direct sunlight.
Safety Notes	Do not disassemble. Keep away from children. Do not expose to extreme temperatures or moisture.
Spare Parts Availability	Contact Sandstrøm support for replacement parts.
Repair Information	Refer to qualified service personnel. Do not attempt self-repair.

Frequently Asked Questions - SHFGLC11 Sandstrøm

How do I pair my Sandstrøm SHFGLC11 speaker with a Bluetooth device?

Turn on the speaker by pressing the power button. The Bluetooth indicator will flash. On your device, enable Bluetooth and select 'Sandstrøm SHFGLC11' from the list. If prompted, enter PIN 0000.

How long does the battery last on a full charge?

The built-in battery provides up to 12 hours of playback at 50% volume. Actual battery life varies with volume level and audio content.

Can I charge the speaker while using it?

Yes, you can use the speaker while it is charging via the USB-C port. However, charging may take longer if playing at high volume.

Is the SHFGLC11 water-resistant?

Yes, it has an IPX5 rating, meaning it can withstand splashes of water from any direction. It is not suitable for submersion.

How do I reset the speaker to factory settings?

While the speaker is on, press and hold both the Volume + and Bluetooth buttons simultaneously for 5 seconds. The speaker will power off and reset.

Can I connect two SHFGLC11 speakers together for stereo sound?

This model does not support a stereo pairing feature. For multi-speaker setups, consider using a third-party app or connecting via AUX splitter.

What should I do if the speaker does not turn on?

Ensure the speaker is charged. Connect to a power source and wait 10 minutes. If still unresponsive, try a reset by pressing the power button for 10 seconds.

How do I clean the speaker?

Use a soft, dry cloth to wipe the exterior. Do not use any liquids, solvents, or abrasive cleaners. For the mesh, gently brush with a soft bristle brush.

What is the Bluetooth range of the speaker?

The Bluetooth signal can reach up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

Can I use the speaker as a hands-free speakerphone?

Yes, the built-in microphone allows you to answer and make calls. When a call comes in, press the play/pause button to answer.

USER MANUAL SHFGLC11 Sandstrøm

Hi-Fi with Docking for iPhone and iPod

SHFGLC11

Interior scene with a white armchair, wooden fire pit, and stacked books on a wooden floor (no visible text or symbols)

Exterior view of a Soundstrom air conditioner unit with a digital display and remote control (no visible text or symbols)

(iPhone and iPod not included)

Contents

Unpacking....5

Product Overview......6

Front View....6

Top View 6

Rear View....7

LCD Display Window 7

Remote Control....8

Remove the Insulating Strip from the Remote Control 9

Battery Replacement for the Remote Control 9

Handling the Battery....9

Handling the Remote Control ....10

Remote Control Operation Range....10

Wall Mounting 10

Connections....11

Mains Power....11

Using Earphones....11

Playing music from an Audio Device 12

Playing Music from a USB Device or a Memory Card....12

Compatible Disc Types ....13

Basic Operation ....13

Powering ON/OFF 13

Selecting Modes....13

Adjusting the Volume....14

Clock Setting 14

Timer Clock Setting 14

Sleep Timer Setting ....15

EQ Control....15

CD / MP3 / WMA Operation....16

Playback....16

To Pause Playback....17

To Stop Playback....17

Skipping to Another Track....17

ID3 Operation (For MP3 / WMA Mode)....17

Repeat Playback....18

Random Playback....18

Intro Playback....19

Programmable Playback....19

USB Operation 20

Memory Card Operation 21

AUX Operation....21

iPod Operation....22

Inserting the iPod and Selecting iPod Mode....22

iPod Playback....

iPod MENU Mode ....

Charging Your iPhone/iPod 24

FM Operation....25

Searching for a Station Manually....25

Searching for a Station Automatically 25

Selecting Mono / Stereo 25

Presetting Stations....2

Tuning in to a Preset Station 26

For Better Reception 2

Maintenance 27

Handling Discs....

Cleaning Discs ....

Storing Discs ....

Cleaning the Unit ....

Hints and Tips 28

Specification 29

Safety Warnings....30

Thank you for purchasing your new Sandstrøm Hi-Fi with Docking for iPhone and iPod.

We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Illustration of a computer monitor with front panel, back panel, and screen (no text or symbols)

The Main Unit Remote Control

(P.N.: 070-0019LF-01L0)

If items are missing or damaged, please contact Partmaster (UK only).

Tel: [phone] for assistance.

Product Overview

Front View

1. Speakers
2. CD/iPod Door
3. LCD Display Window
4. IR Sensor
5. STANDBY Indicator

6. FUNCTION Icon

7. MODE Icon

8. ▶/I ENTER Icon
9. ■ MENU Icon
10. SKIP/TUNE SEARCH ▶▶ Icon
11. SKIP/TUNE SEARCH ◀◆◆ Icon

Top View

1. ON/OFF Button
2. CD OPEN/CLOSE Button
3. USB Port

4. MEMORY CARD Port

5. VOLUME +/- Buttons

6. DISPLAY Button
7. iPod OPEN/CLOSE Button

Rear View

1. POWER ON/OFF Button
2. Mains Cable

3. FM Aerial

4. Earphones ⏻ Socket

5. LINE IN Socket

LCD Display Window

1. SLEEP Indicator
2. TIMER Indicator

3. TIMER / RADIO MEMORY NUMBER Indicator

4. VOLUME LEVELS Indicator

5. STEREO Indicator
6. TRACK / NUMBER / TIME Indicator

1. ON/OFF Button
2. DISPLAY Button
3. ▶/|| ENTER Button
4. Button
5. ■ MENU Button
6. PRESET/FOLDER ◀ Button
7. REPEAT Button
8. EQ Button

9. MUTE Button

10. FUNCTION Button

11. MODE Button
12. ▶▶▶Button
13. PRESET/FOLDER ▶ Button
14. RANDOM Button
15. TIMER Button
16. INTRO Button
17. SLEEP Button
18. VOLUME +/- Buttons

Remove the Insulating Strip from the Remote Control

Remove the insulating mylar strip from the battery if the battery is being used for the first time. It is located at the bottom back side of the remote control.

Diagram showing a finger pressing a curved object with an arrow indicating direction (no text or symbols)

Battery Replacement for the Remote Control

The remote control requires a CR2032, 3V Lithium battery.

1. Slide and hold the battery release tab in the direction of the arrow.

2. Pull out the battery holder and remove the old battery.

3. Replace with a new one battery.

4. Insert the battery holder back into the remote control.

graph TD
    A["Rectangular Component"] --> B["Internal Components"]
    B --> C["Electronic Component with Ring"]
    C --> D["Final Component"]

Handling the Battery

1. Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.
2. Install the battery correctly by following the polarity (+ and -) indications in the battery compartment.
3. When the battery is exhausted, the remote control will not function.
4. Only use the battery type indicated in this manual.
5. Do not dispose of the used battery as domestic waste. Dispose of it in accordance with the local regulations.
6. Small button cell batteries such as the one used in the remote control are easily swallowed by young children and this is dangerous. Keep loose button cells away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.

Handling the Remote Control

• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
- Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire.

Remote Control Operation Range

Point the remote control at the unit no more than 5 metres from the remote control sensor and within 60° of the front of the unit. The operating distance may vary depending on the brightness of the room.

Wall Mounting

Fix the two screws (Size: 3.5*25BA) (not included) onto the wall. They should be parallel to each other. The distance between the two screws should be 140 mm.

Flip the base stand upward and attach the mounting hold to the screws by following the arrow direction to mount the unit onto the wall.

The wall where the Base stand unit is to be installed must be capable of long-term support of the total load of the Hi-Fi System unit. Measures should also be taken to ensure sufficient strength to withstand the force of earthquakes, vibrations and other external forces. Incorrect installation can cause the Hi-Fi System to fall and cause injury.

Connections

Mains Power

• This unit was designed to operate with an AC 230-240V \~50Hz power supply.
• Connecting the unit to any other power source may cause damage to the unit. Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket. The unit is now connected and ready to use.
• To switch the unit off completely, switch the POWER ON/OFF switch to the OFF position or withdraw the mains plug from the mains socket.

Line drawing of a cable being inserted into a TV unit, showing cable routing from a wall socket to a monitor (no text or symbols)

Using Earphones

Turn down the volume before connecting the earphones. Slowly raise the volume with the earphones on until you reach your desired volume. When earphones are connected, the speaker is automatically muted.

Long-term exposure to loud music may cause hearing damage. It if best to avoid extreme volume when using earphones, especially for extended periods.

Playing music from an Audio Device

The AUX input is located on the rear side of the unit. Use a 3.5mm stereo audio cable (not included) connect the audio device through the LINE IN socket.

Playing Music from a USB Device or a Memory Card

The USB device and Memory Card ports are located on the top of the unit. Use a USB device or a SD memory card to insert into the slots.

Top View of the unit Top View of the unit

Line drawing of a device rear panel with an attached USB port and cable (no text or symbols)

Diagram of a computer monitor setup with an open port and a SD card (no text or symbols present)

Compatible Disc Types

Disc Types Disc Logo Recorded Content
CD-R (CD Recordable)		AUDIO
CD-RW (CD-Rewritable)		AUDIO
AUDIO-CD (Compact Disc Digital Audio)		AUDIO

Some recorded files may not be able to be played due to the type and format of disc or condition of the recording.

Basic Operation

Powering ON/OFF

When you first connect the unit to the mains socket. Switch the POWER ON/OFF button at the rear of the unit to the ON position. The unit will be in STANDBY mode.

• Press the ON/OFF button on the unit or on the remote control to switch the unit to Power ON mode.
• Press the ON/OFF button again to switch the unit to STANDBY mode.
• Disconnect the mains cable from the mains socket if you want to switch the unit off completely.

Selecting Modes

Tap the FUNCTION Icon on the unit or press the FUNCTION button on the remote control repeatedly to switch between modes.

graph LR
    A["CDUSBCARDiPodAUXTUNER"] --> B["→"]
    B --> C["→"]

• If there is no signal when the unit is in CD / USB / CARD mode, the unit will automatically switch to STANDBY mode in approx. 15 minutes.
• When the unit is in the iPod mode and if there is no iPod in the iPod dock, the unit will automatically switch to STANDBY mode in approx. 15 minutes.
• While in STANDBY mode, press any button to illuminate the display for about 10 seconds.
• To save energy, turn off the unit by switching the POWER ON/OFF switch at the rear of the unit to the "OFF" position.

Adjusting the Volume

Press the VOLUME +/- buttons on the unit or the remote control to increase/decrease the volume.

Press the MUTE button on the remote control to switch the sound off. The volume level will flash and the audio output will temporarily stop. Press the MUTE button again to resume audio listening.

Clock Setting

Setting the clock can only be done in STANDBY mode.

When the unit is in STANDBY mode, the STANDBY LED indicator illuminates.

1. In STANDBY mode, Tap and hold the MODE Icon on the unit or press and hold the MODE button on the remote control until the 24-hour indicator is flashing, then tap the SKIP/TUNE SEARCH ◀◀▶ lebons on the unit or press the buttons on the remote control to select the 12-hour or 24-hour time format on the display.
2. Tap the MODE Icon on the unit or press the MODE button on the remote control to confirm, then the hour digits will flash.
3. Tap the SKIP/TUNE SEARCH 🖼️ ➕️ recons on the unit or press the buttons on the remote control to adjust the hour digits while flashing. Tap the MODE Icon on the unit or press the MODE button on the remote control to confirm, then the minute digits will flash.
4. Tap the SKIP/TUNE SEARCH ◄◄►bns on the unit or press the buttons on the remote control to adjust the minute digits while flashing.
5. Tap the MODE Icon on the unit or press the MODE button on the remote control to confirm the time.
6. Each enable state will be cleared if any buttons are not pressed within 10 seconds.

Timer Clock Setting

Setting the timer clock in STANDBY mode.

1. Press and hold the TIMER button on the remote control until the "ON" indicator and "00:00" show on the display and the hour digits flash.
2. Tap the SKIP/TUNE SEARCH 🐘cons on the unit or press the ↓buttons on the remote control to adjust the hour digits and then press the TIMER button on the remote control to confirm. The minute digits will flash.
3. Tap the SKIP/TUNE SEARCH ◄◄◄►bons on the unit or press the ◄◄►buttons on the remote control to adjust the minute digits and then press the TIMER button on the remote control to confirm the TIMER ON time.
4. After adjusting "TIMER ON", "OFF" indicator will show on the display and the hour digits flash.
5. Tap the SKIP/TUNE SEARCH 🔊 🔊 🔊 buttons on the unit or press the 🔊 buttons on the remote control to adjust the hours digits and then press the TIMER button on the remote control. The minute digits will flash.

1. Tap the SKIP/TUNE SEARCH lights on the unit or press the buttons on the remote control to adjust the minute digits and then press the TIMER button on the remote control to confirm the TIMER OFF time.
2. Now the "TUNER" indicator will flash on the display. Press the SKIP/TUNE SEARCH buttons to select the mode (TUNER / CD / USB / CARD / iPod).
3. Press the TIMER button on the remote control again, the timer "VOL-13" indicator will flash on the display. Tap the SKIP/TUNE SEARCH ◀▶▶ bns on the unit or press the ◀◀▶ buttons on the remote control to adjust the volume to the desired level.
4. After adjusting "TIMER ON" and "TIMER OFF", press the TIMER button on the remote control to confirm. The "☐" indicator will show on the display.
5. The unit will be turned on automatically to the selected TUNER / CD / USB / CARD / iPod mode and turn off when the timer reaches the preset time.
6. To disable the timer setting, press the TIMER button. The "⊕" indicator will disappear from the display.

• Each enable state will be cleared if buttons are not pressed in 10 seconds.
• For the FM tuner timer, it will turn on to the last station you tuned into.
- If the display shows "ERROR" while you set the "TIMER ON" it means both "TIMER ON" and "TIMER OFF" is the same. In this case, please go to "TIMER OFF" to set the off time first.
• Volume will automatically adjust to the setting gradually when the timer is ON.

Sleep Timer Setting

The sleep timer automatically turns the unit off after a certain time.

1. While the unit is on, press the SLEEP button on the remote control to adjust the TUNER / CD / USB / CARD / iPod / AUX in SLEEP mode.
2. Press the SLEEP button repeatedly to select the desired sleep time as below:

1. After setting a desired sleep time, the " indicator will show on the display.
2. The unit will automatically turn to STANDBY mode once it counts down the sleep time.
3. To clear the preset sleep time, keep pressing the SLEEP button until the "icon disappears."

EQ Control

This system supports a variety of equalizers and sound effects.

During playback, press the EQ button on the remote control to select a desired MUSIC mode. Each time the EQ button is pressed, the MUSIC mode will change to the next one as follows:

graph LR
    A["PASSO"] --> B["ASSICROCKPOPJAZZ"]
    B --> C["Return Arrow"]

CD / MP3 / WMA Operation

Playback

1. During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION button on the remote control repeatedly to select CD mode. The unit will start to read the CD/MP3 disc and start playback automatically.

2. This unit can play CD, CD-R, CD-RW, MP3, WMA disc, 8cm and Multi Section of MP3 DISC.

3. It can "Playback Transfer Rate in 8-320 kbps", Max Readable Folders 99 and 999 tracks.

1. If there is no disc or the disc can't be read, "NO DISC" will show on the display.

Illustration of a hand holding a circular disc next to a computer monitor, with an arrow indicating direction (no text or symbols)

1. Press the CD OPEN/CLOSE button on the unit and the disc door will slide to the right automatically.
2. Place the CD/MP3/WMA disc with the label side up into the CD compartment, and then press the CD OPEN/CLOSE button on the unit to close the disc tray. The unit will start to read the CD/MP3/WMA disc and playback automatically.
3. If playback doesn't start automatically, tap the ▶/□ ENTER icon on the unit or press the ▶ENTER button on the remote control, the unit will play the first track of the CD disc.

• During iPod mode, the CD OPEN/CLOSE button will disable. Please select other mode to open the CD/iPod door.
• Do not press or tap any button until the CD/iPod door completely open or close

To Pause Playback

Tap the ▶ENTER icon on the unit or press the ENTER button on the remote control to pause the playback, the time elapsed indicator will flash.

To resume playback, tap the ▶/I ENTER icon on the unit or press the ▶ENTER button on the remote control again.

To Stop Playback

Tap the ■ MENU icon on the unit or press the ■ MENU button on the remote control to stop playback.

Skipping to Another Track

• Tap the SKIP/TUNE SEARCHI ◀◀▶▶I icons on the unit or press the ◀◀▶▶I buttons on the remote control to skip to the start of the current track or to skip to the next track.
• Tap and hold the SKIP/TUNE SEARCH◀◀▶️ons on the unit or press and hold the ▶◀◀▶▶▶▶ buttons on the remote control to skip fast reverse/forward of the current track. Release the button to resume normal playback.

For MP3 / WMA Discs

• During MP3 playback, press the PRESET/FOLDER ◀▶ buttons on the remote control to skip to the 1 ^st track of the previous/next album.
• During STOP mode, press the PRESET/FOLDER▶buttons on the remote control repeatedly to select your desired album to play. Tap the▶/ENTER icon on the unit or press the▶ENTER buttons on the remote control to start playing the 1 ^st track in that album.

ID3 Operation (For MP3 / WMA Mode)

- During MP3 playback, press the DISPLAY button on the unit or the remote control to open the ID3 function. If the MP3/WMA file is written "ID3", it will automatically search the information of "TITLE", "ARTIST" and "ALBUM" indicated on the display.

graph LR
    A["TITLE ARTIST"] --> B["ALBUM"]
    C["CURRENT TIME"] --> B

- Press the DISPLAY button again to close the ID3 function.

Repeat Playback

For CD Mode

Repeat Current Track

Press the REPEAT button on the remote control once, "REPEAT" indicator will show on the display. The current track will be played repeatedly.

Repeat the Entire CD

Press the REPEAT button twice, "REPEAT ALL" indicator will show on the display. All the discs tracks will be played repeatedly in a cycle.

Cancel Playback Mode

Press the REPEAT button three times to cancel the repeat function.

For MP3 / WMA Mode

Repeat Current Track

Press the REPEAT button on the remote control once, "REPEAT" indicator will show on the display. The current track will be played repeatedly.

Repeat the Entire CD

Press the REPEAT button twice, "REPEAT ALL" indicator will show on the display. All the discs tracks will be played repeatedly in a cycle.

Repeat the Album

Press the REPEAT button three times, "REPEAT ALBUM" indicator will show on the display. The current album will be played repeatedly in a cycle.

Cancel Playback Mode

Press the REPEAT button four times to cancel the repeat function.

Random Playback

All tracks on the disc can be played in a random order.

• During playback, press the RANDOM button on the remote control. The "RANDOM" indicator will show on the display. All tracks will be played randomly.
  • After all the tracks have played once, the playback will stop automatically.
• To cancel the random playback, press the RANDOM button on the remote control during RANDOM playback. Normal playback will resume.

Intro Playback

• Press the INTRO button on the remote control. The "INTRO" indicator will show on the display. The unit will play the first 10 seconds of each track.
• Press the INTRO button on the remote control again to resume the normal playback.

Programmable Playback

A program of up to 32 tracks in CD mode or 64 tracks in MP3 / WMA / USB / SD CARD mode can be set to play in a preset order.

For CD Mode

1. In STOP mode, tap the MODE icon on the unit or press the MODE button on the remote control to shift to PROGRAM mode. "MEMORY" indicator will show on the display.
2. Tap the SKIP/TUNE SEARCH ◄◄►ibns on the unit or press the ◄◄►ibns on the remote control to select the desired track and then tap the MODE icon on the unit or press the MODE button on the remote control to store the track in the memory.
3. To add additional tracks, repeat step 2 (up to 32 tracks).
4. To start playback, tap the ▶/□ ENTER icon on the unit or press the ▶ENTER button on the remote control. The first track of the program will start to play. When all tracks have been played, the unit will show the number of tracks and the playing time of the CD tracks.

For MP3 / WMA Mode

1. In STOP mode, tap the MODE icon on the unit or press the MODE button on the remote control to shift to PROGRAM mode. "MEMORY" indicator will show and the album number will flash on the display.
2. Press the PRESET/FOLDER ◀buttons on the remote control to select the desired album number and then tap the MODE icon on the unit or press the MODE button on the remote control. The track number will flash on the display.
3. Tap the SKIP/TUNE SEARCH 🖼️ Icons on the unit or press the 🔊 buttons on the remote control to select the desired track and then tap the MODE icon on the unit or press the MODE button on the remote control to store the track in the memory.
4. To add additional tracks, repeat step 2 (up to 64 tracks).
5. To start playback, tap the ▶/□ ENTER icon on the unit or press the ▶ENTER button on the remote control. It will play starting with the first track of the program. When all tracks have been played, the unit will show the number of tracks and the playing time of the MP3/WMA tracks.

To Erase the Program

- In STOP mode, you can erase the contents of the memory by tapping the ■ MENU icon on the unit or pressing the ■MENU button on the remote control or by opening the disc door.

- Setting a new program will erase the existing one.

• Press the REPEAT button once, "REPEAT" will illuminate on the display. The unit will repeat the current track.
• Press the REPEAT button twice, "REPEAT ALL" will illuminate on the display. The unit will repeat the total number of tracks.
• Press the REPEAT button once more again. The unit will return to play the programme.

USB Operation

1. During POWER ON mode, connect a USB device to the USB port directly.
2. Tap the FUNCTION icon on the unit or press the FUNCTION button on the remote control repeatedly to select USB mode.
3. If no USB device is connected, "NO USB" will show on the display.
4. The unit will search for all available MP3/WMA files, and start playback automatically.
5. Press the PRESET/FOLDER ◀buttons on the remote control to select the desired folder.
6. Tap the SKIP/TUNE SEARCH 🖼️◀◀▶bons on the unit or press the buttons on the remote control to select a MP3/WMA file number.

• The unit can only playback MP3 and WMA file formats in USB operation.
• This unit supports USB 1.1 and 2.0 versions.
• The unit can support USB devices with up to 32GB of memory.
- The unit cannot play WMA files with protection by "DRM FILE".
- The unit may not be compatible with all USB devices. This is not an indication of a problem with the unit.

Memory Card Operation

1. During POWER ON mode, connect a SD card to the MEMORY CARD port directly.
2. Tap the FUNCTION icon on the unit or press the FUNCTION button on the remote control repeatedly to select CARD mode.
3. If no memory card is connected, "NO CARD" will show on the display.
4. The unit will search for all available MP3/WMA files, and start playback automatically.
5. Press the PRESET/FOLDER ▶buttons on the remote control to select the desired folder.
6. Tap the SKIP/TUNE SEARCH 🖼️ ➕️ ➕️ ☑️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐️ ☐

• The unit can only playback MP3 and WMA file formats in CARD operation.
• The unit can support SDHC memory cards with up to 32GB of memory.
• The unit cannot play WMA files with protection by "DRM FILE".

AUX Operation

There is a LINE IN socket located at the rear side of the unit. Analogue audio sound signals from other sources can be input to the unit through this socket.

1. Connect the LINE IN socket to another audio device with a LINE IN socket using a 3.5mm stereo cable (not included).
2. During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION button on the remote control repeatedly to select the AUX Input function until "AUX" shows on the display.
3. Tap the VOLUME +/- icons on the unit or press the VOLUME +/- buttons on the remote control to adjust the volume control for your desired sound output level.
4. In AUX mode, operate your audio device directly for playback features.

Make sure all connections are removed from the sockets before switching off the power or withdrawing the mains plug from the mains socket.

iPod Operation

Using the iPhone/iPod dock you can play music files stored on your iPhone/iPod through the stereo speakers.

Inserting the iPod and Selecting iPod Mode

This unit can support iPhone 3G/3GS/4 and various models of iPod players with 30-pin dock connectors, such as iPod touch 1st/2nd/3rd/4th Generation, iPod Classic, iPod nano 1st/2nd/3rd/4th/5th/6th Generation, iPod 5th Generation (video), iPod 4th Generation (with and without colour display) and iPod mini.

1. During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION button on the remote control repeatedly to select iPod mode. If there is no iPod/iPhone connected, "NO IPOD" will show on the display.

2. Press the iPod OPEN/CLOSE button on the unit and the disc door will slide to the left automatically.

3. Press the ▲ button on the iPod compartment of the unit. A shaft will pop up and unload the iPhone/iPod docking by pulling downward.

1. Insert the Universal iPod dock adapter (not included) into the iPhone/iPod dock until it sits firmly in place.

2. Connect the iPhone/iPod to the iPod connector inside the dock.

3. Press the ▲ button on the iPod compartment of the unit.

4. Press the iPod OPEN/CLOSE button on the unit to close the disc door

5. Tap the ▶/□ ENTER icon on the unit or press the ▶/□ ENTER button on the remote control to start playing.

• Your iPod will automatically start charging once it is docked.
• Switch off your iPod while listening to the radio to prevent signal interference.
• Use your iPhone/iPod controls to manually select your iPhone/iPod music menu, then proceed to the next step.

- During iPod mode, the CD OPEN/CLOSE button will disable. Please select other mode to open the CD/iPod door.

- Do not press or tap any button until the CD/iPod door completely open or close.

iPod Playback

Tap the▶/∥ ENTER icon on the unit or press the▶/∥ ENTER button on the remote control to start playing.

To Pause Playback

- Tap the ▶/□ ENTER icon on the unit or press the ▶/□ ENTER button on the remote control to pause the playback.

- To resume playback, tap the▶/I ENTER icon on the unit or press the▶ENTER button on the remote control again.

Skipping to Another Track

Tap the SKIP/TUNE SEARCH! On the unit or press the button on the remote control to skip previous or next track from the current track.

Locating a Particular Point on a Track

Tap and hold the SKIP/TUNE SEARCH icons on the unit or press and hold the buttons on the remote control to fast reverse or fast forward the current track. Release the button to resume normal playback.

To Stop Playback

Tap the ■ MENU icon on the unit or press the ■ MENU button on the remote control to stop playing.

Repeat Playback

Press the REPEAT button on the remote control to play songs repeatedly. Some of the older iPod versions do not support this function.

Random Playback

Press the RANDOM button on the remote control to play songs randomly. Some of the older iPod versions do not support this function.

In iPod mode, Repeat and Random playback indicators will not shown on the display of the unit.

iPod MENU Mode

1. While the unit is in iPod mode, tap the MODE icon on the unit or press the MODE button on the remote control to enter the iPod MENU mode. The iPod MENU indicator will show on the display.

1. Tap the ■MENU icon on the unit or press the ■MENU button on the remote control to return to the previous iPhone/iPod menu.
2. Tap the ▶/□ ENTER icon on the unit or press the ▶/□ ENTER button on the remote control to enter the desired menu folder.
3. Tap the SKIP/TUNE SEARCH ◄◄◄► bns on the unit or press the buttons on the remote control to navigate up and down in the iPhone/iPod menu.
4. If you want to return to the previous iPhone/iPod menu, tap the ■ MENU icon on the unit or press the ■MENU button on the remote control again.
5. To resume playback, tap the MODE icon on the unit or press the MODE button on the remote control. The unit will return to iPod mode.

• For iPhone/iPod, please make sure the current mode is set as iPod/Music/Video.
• iPod 8 generation doesn't support the navigation menu.

Charging Your iPhone/iPod

1. Your iPhone/iPod has an internal non-removable battery, the battery may need to be charged if the iPhone/iPod has not been used for awhile.
2. You can charge the iPhone/iPod through the unit automatically under the STANDBY or POWER ON mode.

The iPhone/iPod battery is 80% charged in about an hour, and fully charged in about a few hours. If you charge it while playing music, it may take longer.

• It is not recommended to charge when using the TUNER mode. It may interfere with the reception.
• To avoid damaging your iPhone/iPod or the unit please take care when inserting and removing your iPhone/iPod from the dock.
  • The unit does not support charging ^st , 2^nd , 3^rd Generation iPods.

FM Operation

During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION button on the remote control repeatedly to the TUNER mode to select a FM station.

Searching for a Station Manually

- To tune for weak station, tap the SKIP/TUNE SEARCH ◀◀▶▶I icons on the unit or press the ◀◀▶buttons on the remote control continuously until you reach the correct frequency or the reception is at its best.

Searching for a Station Automatically

- Tap and hold the SKIP/TUNE SEARCH ◀◀▶▶I icons on the unit or press and hold the ▶◀▶ I buttons on the remote control until the tuner starts reverse/forward searching for a station. After tuning into a station, the search stops.

• The search may not stop at a station with a very weak signal.

Selecting Mono / Stereo

This unit can receive the FM mode only.

- Press the DISPLAY button repeatedly on the unit or the remote control to select FM stereo/mono mode. The "CST." indicator will show on the display in stereo signals reception.

Select mono mode is helpful when receiving poor signal reception.

Presetting Stations

The unit's memory can store a total of 30 FM stations. Presetting allows you to tune in to a station directly.

1. Tune in to a desired station and then tap the MODE icon on the unit or press the MODE button on the remote control. The preset number will flash and the "MEMORY" indicator will show on the display.
2. Press the PRESET/FOLDER ▶buttons on the remote control to select the preset number.
3. Tap the MODE icon on the unit or press the MODE button on the remote control again to store it in the memory.
4. Repeat steps 1-3 to store other stations.

• Storing a new station into a preset location will erase the previously stored station in that location.
• Power off will not erase the memory of preset stations. Perform the stations presetting procedures again to store the stations.
• To erase all preset memory, tap and hold the ENTER icon on the unit or press and hold the ▶ENTER button on the remote control in STANDBY mode. The standby LED and LCD will flash once.
• There are some preset stations in default setting, you can overwrite them anytime you want.

Tuning in to a Preset Station

Press the PRESET/FOLDER <buttons on the remote control to select a preset number.

For Better Reception

Fully unwind the FM aerial. Extend the FM aerial and place it in the position that sounds best.

Do not connect the FM aerial to an outside aerial.

Maintenance

Handling Discs

• Do not touch the playback side of the disc.
• Do not attach paper or tape to the disc.

Cleaning Discs

- Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean.

• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.
• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray. They may damage the disc.

Storing Discs

• Do not store discs in places subjected to direct sunlight or near heat sources.
• Do not store discs in places subjected to moisture and dust such as a bathroom or near a humidifier.
• Storing discs vertically in a case, stacking discs or placing objects on discs outside of their cases may cause warping.

Cleaning the Unit

Ensure to unplug the unit from the mains socket before cleaning.

• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
- Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.

Hints and Tips

If a problem does occur, it may often be due to something very minor. The following table contains various tips.

Problem Cause / Solution
CD
Micro HiFi system does not power on	Make sure the mains adapter is secure in the outlet, and the outlet has power.Make sure you've selected CD mode.
Disc in place but the unit won't play	Make sure the disc label is facing up.Make sure the disc is clean.PAUSEmode may be activated, deactivate it.Disc may be damaged or dirty; check and clean the disc.
Disc skips• Make sure the unit is on a secure spot. Vibrations or jarring can cause the disc to skip.
RADIO
Poor FM reception• Make sure the FM antenna wire is fully extended.Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers).
iPod
iPod does not respond to the speaker system.	iPod may not be docked properly or installed properly.Remove your iPod from the dock and check for obstructions on the connectors in the dock and on your iPod.Make sure that your iPod is working properly before docking. Please refer to your iPod manual for details.

Specification

Model SHFGLC11
Disc Format CD, CD-R, CD-RW,	MP3, WMA
Terminals	USB 2.0 x 1, SD Card Reader x 1, LINE IN Socket x 1, Earphones Socket x 1, iPhone/iPod Dock x 1, CD Tray x 1
Power Supply 230-240V ~50Hz
Output Power 5Watts x 2
Power consumption in standby mode	Approx. 0.85Watts
Dimension 530 (W) x 123.6 (D) x 221 (H) mm
Unit Weight: 2.5 kg
Radio Section
Frequency Range FM 87.5 – 108 MHz

Features and specifications are subject to change without prior notice.

Safety Warnings

• Read all the instructions carefully before using the unit and keep them for future reference.
• Retain the manual. If you pass the unit onto a third party make sure to include this manual.
• Check that the voltage marked on the rating label matches your mains voltage.

Damage

• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit

• The unit must be placed on a flat stable surface and should not be subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.
  • The mains socket must be located near the unit and should be easily accessible.

Temperature

• Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric fires.
• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames

• Never place any type of candle or naked flame on the top of or near the unit.

Moisture

• To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.
- If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer..

Ventilation

• To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.
- Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Safety

• Always disconnect the unit from the mains supply before connecting/ disconnecting other devices or moving the unit.
• Unplug the unit from the mains socket before a lightning storm.

Mains Cable

• Make sure the unit or the unit stand is not resting on top of the mains adapter cable, as the weight of the unit may damage the cable and create a safety hazard.

Interference

- Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Earphones

• Listening to loud sounds for prolonged periods of time may permanently damage your hearing.
• Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level.

Batteries

• Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous.
• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.
• Please dispose of batteries correctly by following the guidance in this manual..

Supervision

• Children should be supervised to ensure that they do not play with the unit and the remote control.
- Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

Service

• To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.
• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance

• Ensure to unplug the unit from the power supply before cleaning.
• Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit's surface.
  • Do not use liquids to clean the unit.

NOTE: If you require a replacement for any of the items listed below, please quote their corresponding part numbers:

Replacement Part Part Number

Remote Control 070-0019LF-01L0

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door

the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls charged at National Rate.

Notes for battery disposal

The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or your retailer where you purchased the product.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

Made for

iPod

iPhone

iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

All trademarks are the property of their respective owners and all rights are acknowledged.