L400CFW16 - Freezer Logik - Free user manual and instructions

Product Type	Chest Freezer
Brand	Logik
Model	L400CFW16
Net Capacity	400 Litres
Energy Class	F
Annual Energy Consumption	350 kWh
Freezing Capacity	22 kg/24h
Storage Time During Power Failure	Up to 48 hours
Dimensions (W x D x H)	1400 x 700 x 800 mm
Net Weight	60 kg
Power Supply	220-240 V, 50 Hz
Rated Current	1.5 A
Climate Class	SN-ST (Subnormal to Subtropical)
Noise Level	42 dB(A)
Defrost Type	Manual
Refrigerant	R600a (Isobutane)
Number of Baskets	2
Fast Freeze Function	Yes
Temperature Control	Mechanical dial
Interior Light	No
Lockable Lid	Yes
Wheels	4 castors
Spare Parts Availability	7 years from end of production

Frequently Asked Questions - L400CFW16 Logik

What is the ideal temperature setting for the Logik L400CFW16 freezer?

Set the dial to -18°C for optimum food preservation. Adjust according to the amount of food and ambient temperature.

How do I defrost the freezer?

Unplug the freezer, remove all food, and leave the lid open. Use a plastic scraper to remove ice. Never use sharp objects or heat sources. Clean and dry thoroughly before restarting.

What is the noise level of this freezer?

Normal operation noise is about 42 dB, which is comparable to a quiet conversation. Some sounds from the compressor and refrigerant flow are normal.

How much food can I freeze in 24 hours?

The maximum freezing capacity is 22 kg per 24 hours. Do not exceed this to ensure efficient freezing.

What should I do during a power failure?

Keep the lid closed. The freezer can preserve food for up to 48 hours if unopened. After that, check food condition.

How do I clean the freezer?

Unplug the unit and remove food. Use a mixture of warm water and mild detergent to wipe interior and exterior. Rinse and dry thoroughly before restarting.

Is the freezer suitable for garages or outbuildings?

Yes, the climate class SN-ST allows operation in ambient temperatures from 10°C to 38°C. Avoid placing in direct sunlight or damp areas.

Can I change the door opening direction?

This model has a fixed lid; the opening direction is not reversible. Ensure sufficient space above for lid clearance.

What spare parts are available?

Common spare parts such as baskets, temperature control knobs, and hinges are available for up to 7 years after production. Contact Logik support.

How do I adjust the temperature?

Turn the mechanical dial located inside the freezer. Numbers 1-7 indicate colder settings, with 7 being the coldest. Start at medium and adjust as needed.

USER MANUAL L400CFW16 Logik

Contents

Safety Warnings....4

Unpacking......6

Installation....7

Location....7 Free Space Requirements....7 Installing the Door Handle....7 Installing the Inner Drain Plug before use....8 Cleaning Before Use 8 Before Using Your Unit....8

Product Overview....9

Operation....10

Switching On/Off Your Unit 10 Adjusting the Temperature....10 Fast Freezing....10 Noises Inside the Unit! 11 Tips for Keeping Food in the Unit....11 Preparations for Freezing....11 Defrosting Frozen Food....12

Cleaning 12

Defrosting 12 Cleaning the Interior and the Exterior of the Unit....13

Maintenance 13

Replacing the Light....13 Care When Handling / Moving the Unit....13 Servicing 13 Switching Off for Long Periods of Time....13

Disposal....13

Troubleshooting....14

Power Cut 14 The Freezer is Particularly Cold 14 The Freezer is Particularly Warm 14 The Freezer is Not Working 14

Specifications....15

Product Fiche 15

For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below.

• Read all instructions carefully before using the unit and keep them for future reference.
• Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
• This appliance is intended for indoor household use and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farm houses and by clients in hotels, motels and other residential type environment;
• bed and breakfast type environment;
• catering and similar non-retail applications.
• Ensure that the plug is easily accessible to enable disconnection from the mains supply.
• If the mains cable is damaged, it must be replaced by the manufacturer, its service agent or a qualified technician in order to avoid a hazard.
• Choose a location for your unit away from heat sources such as radiators or fires as refrigerant and vesicant are burnable. • The unit must be manoeuvred by a minimum of 2 persons.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the unit.
• If your unit is fitted with a lock to prevent children being trapped inside, keep the key out of reach and not in the vicinity of the unit.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Do not store bottles or glass containers in the freezer compartment. Contents can expand when frozen (fizzy drinks) which may break the bottle and damage your freezer compartment.

WARNING

• Keep ventilation openings in the unit enclosure or in the built-in structure clear of obstructions.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not use electrical appliances inside the food storage compartments of the unit, unless they are of the type recommended by the manufacturer.
• Do not damage the refrigerant circuit (The refrigerant is a very environmental-friendly gas but is also combustible. Take care when transporting or moving the unit to ensure that the refrigeration circuit is not damaged. In the event of damage avoid naked flames or ignition sources and ventilate the room in which the unit is placed for a few minutes.)
• When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

WARNING

IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL TO CARRY OUT SERVICING OF REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.

TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.

Thank you for purchasing your new product.

We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Main Unit

Door Handle x1

Screw x6

Handle Cover x1

Freezer Basket x3

Plastic Scraper

Key x2

Instruction Manual

Inner Drain Plug

Door Lock

If items are missing or damaged please contact Partmaster (UK only).

Tel: [phone] for assistance.

Location

When selecting a position for your unit you should make sure the floor is flat and firm and the room is well ventilated. This unit can be used in a garage or outbuilding. For optimum energy efficiency the unit should be located within an average room temperature of between 10°C and 43°C. If the room temperature drops below or rises above these temperatures the energy consumption and performance may be affected. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption. Do not drape the unit with any covering.

Free Space Requirements

When installing the unit, ensure that 25 mm of free space is left at both sides and 50 mm at the rear of the unit. Please ensure there is adequate space for the door to fully open.

Installing the Door Handle

1. Collect the door handle, door lock, screws and handle cover from inside the unit.
2. Place and screw the door lock.
3. Place and screw the door handle.
4. Place the handle cover to cover the screws, bending it slightly and fixing it flat onto the door handle.

• Make sure the door is always kept locked when not in use to prevent children from playing with the unit.
• The door lock is specially designed to prevent the keys from being left inside the lock. • The door keys should be kept out of reach of children.

Installing the Inner Drain Plug before use

Take the inner drain plug from the accessory bag and install it into the inner drain plug hole inside the bottom of the unit.

Cleaning Before Use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a sponge or cloth. Wipe completely dry before. Clean the exterior of the unit with a damp cloth.

If you require more information refer to the Cleaning section.

• Before Plugging in YOU MUST Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On! Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.

Before Using Your Unit

Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.

Switching On/Off Your Unit

• On first connecting the mains cable to the mains socket, press ⏻ for 3 seconds to turn on the unit. All status indicators will flash once. • To turn off the unit, press ⏻ for 3 seconds.

Adjusting the Temperature

• The internal temperature of the unit is controlled by a thermostat. The recommended position is between MIN and NORMAL for colder working environments (i.e., during winter) and between NORMAL and MAX for hotter environments. Please adjust according to the environment.
• Press repeatedly to select the desired temperature scale; the temperature indicator bar goes up a scale with each press. Stop pressing when the desired temperature scale is selected. After about 5 seconds, the selected temperature will automatically set.
• MAX makes the appliance coldest. The ideal position is NORMAL, but it should be adjusted according to its environment. The appliance may not operate correctly if it is in a particularly hot or cold room, or if the door is opened often or for prolonged periods.
• To ensure that the unit is cool enough to sufficiently chill and freeze your food, wait 24 hours before filling it with food.
• If you are concerned that your unit is not being kept cold enough and wish to check the temperature, you will need a special fridge/freezer thermometer. These are available from most supermarkets and hardware shops. Place the thermometer in the freezer and leave overnight. The correct temperature for the freezer should be -18°C or lower.

When there is a disconnection alarm of the temperature sensor, the temperature indicator bar will flash.

Fast Freezing

Fresh food should be frozen as quickly as possible. While in MAX position, press 🔒 to enter SUPER freezing mode. The SUPER indicator will light up while the temperature indicator bar will turn dark. Stop pressing 🔒 if SUPER is selected; after about 5 seconds, SUPER freezing mode will automatically set. SUPER freezing mode helps to quickly freeze and retain more of the goodness of your food.

The compressor will keep working in SUPER freezing mode. The RUNNING indicator lights up, which means the compressor is working.

If SUPER freezing mode keeps on running for 52 hours non-stop, the system will automatically cut out this mode. The temperature scale will automatically return to MAX.

Noises Inside the Unit!

You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you should be aware of them!

These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become more pronounced since the introduction of CFC-free gases. This is not a fault and will not affect the performance of your unit. This is the compressor motor working, as it pumps the refrigerant around the system.

Tips for Keeping Food in the Unit

• Cooked meats/fishes should always be stored above raw meats/fishes to avoid bacterial transfer. Keep raw meats/fishes in a container which is large enough to collect juices and cover it properly. Place the container at the bottom inside the unit.
• Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the unit are kept cool.
• To prevent transfer of flavours and drying out, pack or cover the food separately. Fruit and vegetables do not need to be wrapped. • Always let pre-cooked food cool down before you put in the unit. This will help to maintain the internal temperature of the unit.
• To prevent cold air escaping from the unit, try to limit the number of times you open the door. We recommend that you only open the door when you need to put food in or take food out.

Preparations for Freezing

• Use quality food and handle it as little as possible. Freeze food in small quantities as it freezes faster, takes less time to defrost and enables you to control the quantity you need better.
• Leave cooked food to cool completely. Chill food before freezing if possible.
• Consider how you will want to cook the food before freezing it.
• Don't freeze food in metal containers if you may want to microwave it straight from the freezer.
• Use special freezer bags, freezer film, polythene bags, plastic containers, and aluminium foil (heavy duty grade only). If in doubt, double wrap your food. Don't use aluminium foil for acidic foods, e.g. citrus fruits. Don't use thin cling film, glass, or used food containers without cleaning.
• Exclude as much air from the container as possible. You could buy a special vacuum pump which sucks excessive air out of the packaging.

- Leave a small amount of air space when freezing liquids to allow expansion.

- You can use the space in the freezer most efficiently if you freeze liquids (or solids with liquids, e.g. stew) in square blocks. This is known as "Preforming". Pour the liquid into a polythene bag which is inside a square sided container. Freeze it, and then remove it from the container and seal the bag.

- Label your frozen foods as they will look the same when in frozen state. Use special tapes, labels and pens with different colours. This allows you to easily organise and to effectively use the freezer. Write the contents and date; otherwise the frozen food might exceed the storage time and this could cause food poisoning. Please refer to your food packaging for the recommended storage time.

Defrosting Frozen Food

• Take the frozen food out and let it defrost at room temperature. Don't forget that defrosting in a warm area encourages the growth of bacteria and low temperature cooking may not destroy dangerous bacteria.
• Drain off and throw away any liquid lost during defrosting.
• Always make sure there are no ice-crystals in the food before cooking, particularly with meat. These crystals indicate that the food has not fully defrosted. • Cook food as soon as possible after defrosting.
• Many microwaves and ovens have a defrost setting. To avoid bacterial build up, only use these if you intend to cook the food immediately afterwards.

Never re-freeze anything that has been defrosted unless you cook it again, to kill off harmful bacteria. Never re-freeze defrosted shellfish. Re-seal packs properly after removing items. This prevents drying or freezer-burn and a build up of frost on any remaining food.

Cleaning

Defrosting

Frost may build up in the freezer compartment after it has been used for a period of time. Scrape away the frost using a plastic scraper (included).

Do not use a metal or sharp instrument to scrape away the frost, nor should you use any electrical appliances to aid defrosting.

We recommend that defrosting should be carried out when the frost layer builds up to 10 mm. Choose a time when the stock of frozen food is low, follow these procedures:

1. Take out the food, turn the unit off at the mains supply, unplug the unit and leave the door open. Ideally, the frozen food should be put into another freezer. If this is not possible, wrap the food in several sheets of newspaper or large towels and then a thick rug or blanket to keep it cool.
2. To remove melted frost from the drain hole, place a suitable container under it. Remove the drain cap on the front of the unit. Reach down into the freezer and unscrew the drain plug.
3. Scrape away the frost using the plastic scraper. Defrosting the remaining frost can be sped up by placing a bowl of hot water inside the freezer compartment and closing the door. As the solid frost loosens, scrape it away with the plastic scraper and remove.
4. After all the water has drained away, replace the drain plug and then the drain cap.
5. When defrosting is complete, clean your unit's interior and exterior.
6. When the compartment is completely clean and dry, close the door, switch on the freezer again and set the thermostat to SUPER freezing mode.
7. Leave the unit to cool down for an hour, and then you can start placing frozen food inside the unit. Remember to set the thermostat to NORMAL after 4 hours.

Cleaning the Interior and the Exterior of the Unit

• Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a sponge or cloth. Wipe completely dry.
• Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make sure that the door is closed to avoid the polish getting on the magnetic door seal or inside the unit.

Maintenance

Replacing the Light

The internal light is an LED light. It cannot be changed by the user; please contact your service agent.

Care When Handling / Moving the Unit

Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface.

Servicing

The unit should be serviced by an authorised engineer and only genuine spare parts should be used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact a qualified technician.

Switching Off for Long Periods of Time

When the unit is not in use for a long period of time, disconnect it from the mains supply, empty all food and clean the unit, leaving the door ajar to prevent unpleasant smells.

Disposal

Old units still have some residual value. An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and used again. The refrigerant used in the unit and insulation materials require special disposal procedures. Ensure that none of the pipes on the back of the unit are damaged prior to disposal.

Up to date information concerning options of disposing of your old unit and packaging from the new one can be obtained from your local council office.

When disposing of an old unit break off any old locks or latches and remove the doors as a safeguard.

Power Cut

If you have a freezer thermometer, place it in the freezer where you can get easy access to it to read when the power returns. If the internal temperature is -9°C or less when the power returns, your food is safe. The food in your freezer will remain frozen for approximately 40 hours with the door closed. If you know the power is going to be cut, 40 hours prior to the power cut, set the thermostat control dial to SUPER freezing mode, this will make the freezer colder than normal. If there is no warning, set the thermostat to SUPER freezing mode after the power cut. Don't open the door more than necessary.

The Freezer is Particularly Cold

You may have accidentally left the thermostat on MAX or SUPER freezing mode.

The Freezer is Particularly Warm

The compressor may not be working. Set the thermostat to SUPER freezing mode. If there is no humming noise, it is not working. Contact your local service agent where you purchased your freezer.

The Freezer is Not Working

Check if the Running indicator or temperature indicator bar is illuminated. If not, check if the unit is plugged in and switched on. Check that the fuse in the plug has not blown. Plug in another appliance, such as a lamp, to see if the socket is working.

Condensation Appears on the Outside of the Freezer

Condensation may appear on the surface of the Chest Freezer, this is normal - wipe dry with a dry cloth.

This may be due to a change in the room temperature. Wipe off any residue of moisture. If the problem continues contact the local store where you purchased your freezer.

When your appliance is working, the condenser at the back (exposed models) may become hot or alternatively the sides may become hot (hidden condenser models).

Specifications

Rated Voltage 220-240V~, 50 Hz
Rated Current 1.65 A
Rated Power 180 W
Overall Dimension (H x W x D) 850 x 1299 x 755 mm

Features and specifications are subject to change without prior notice.

Product Fiche

Brand Logik
Model L400CFW16
Household Appliance Category 9
Energy Efficiency Class A+
Energy consumption 308 kWh per year, based on standard test results for 24 hours. Actual energy consumption will depend on how the appliance is used and where it is located.
Fridge Storage Volume -
Freezer Storage Volume	371 L * ***
Manual Defrost
Temperature Rise Time	40 hours
Freezing Capacity	25 kg/24 hrs
Climate Class	N, SN, ST, TThis appliance is intended to be used at an ambient temperature between 10°C and 43°C to achieve the claimed Energy Consumption and Grading. The minimum operation temperature of this refrigerator is -15°C.
Airborne Acoustical Noise 50 dB(A) re 1	pW

Team Knowhow

Help with all life's kit™

For general information about this appliance and handy hints and tips, please visit:

www.TeamKnowhow.com/discover or call 0344 561 1234

Partmaster

.CO.UK

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only) Calls charged at National Rate.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

DSG Retail Ltd. (co. no. 504877)

1 Portal Way, London, W3 6RS, UK