600-24S - Chauffe-eau et chaudière BUDERUS - Free user manual and instructions
Find the device manual for free 600-24S BUDERUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Condensing Boiler (Combi) |
| Brand | Buderus |
| Model | 600-24S |
| Energy Efficiency Class | A |
| Heating Output (Pmax) | 24 kW |
| Domestic Hot Water Output | 24 kW |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 35 kg |
| Power Supply | 230 V / 50 Hz |
| Flue Type | Concentric (Ø 60/100 mm) |
| Functions | Central heating and domestic hot water, electronic ignition, modulation, weather compensation compatible |
| Control Interface | Digital display with rotary knobs |
| Safety Features | Frost protection, overheat protection, flue gas monitoring, safety valve |
| Maintenance | Annual servicing recommended by qualified technician |
| Spare Parts Availability | Genuine Buderus parts through authorized dealers |
| Noise Level | < 50 dB(A) |
| Mounting | Wall-mounted |
| Gas Type | Natural gas (adjustable for LPG) |
| Water Pressure (min/max) | 1.0 / 3.0 bar |
| DHW Temperature Range | 35-65 °C |
| Heating Temperature Range | 20-85 °C |
Frequently Asked Questions - 600-24S BUDERUS
How do I reset the Buderus 600-24S boiler?
Press and hold the Reset button on the control panel for 3 seconds. If the boiler does not restart, check for error codes on the display.
What does error code H01 mean on my Buderus 600-24S?
Error code H01 indicates a flame failure. Check gas supply, gas valve, and ignition system. If persistent, contact a qualified technician.
How do I adjust the hot water temperature on the 600-24S?
Use the DHW knob on the control panel to set the desired temperature between 35 °C and 65 °C.
Why is the boiler pressure dropping?
Check the system pressure gauge. If below 1 bar, use the filling loop to repressurize to 1.0-1.5 bar. Inspect for leaks if pressure drops frequently.
How do I refill the water pressure in my Buderus boiler?
Locate the filling loop (flexible hose with two valves). Open both valves slowly until pressure reaches 1.0-1.5 bar, then close them.
What maintenance intervals are required for the 600-24S?
Annual service by a qualified engineer is recommended. This includes cleaning the heat exchanger, checking gas pressure, and inspecting safety components.
Can I install the 600-24S in a room without windows?
No. The boiler requires adequate ventilation. It must be installed in a room with an air vent or openable window to ensure combustion air supply.
What spare parts are commonly needed for the 600-24S?
Common spare parts include the expansion vessel, gas valve, fan assembly, and three-way valve. Use genuine Buderus parts only.
How do I switch between summer and winter modes?
Press the Mode button until Summer mode (sun icon) or Winter mode (radiator icon) is displayed. Summer mode provides only hot water; winter mode provides both heating and hot water.
What should I do if the boiler frequently locks out?
Check the error code on the display. Common causes include low gas pressure, blocked flue, or faulty components. Reset the boiler and if the issue persists, call a service engineer.
User questions about 600-24S BUDERUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chauffe-eau et chaudière in PDF format for free! Find your manual 600-24S - BUDERUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 600-24S by BUDERUS.
