SC-020 - Kettle Scarlett - Free user manual and instructions

Product Type	Electric Kettle
Model	SC-020
Brand	Scarlett
Voltage	220-240 V~ 50 Hz
Power	1850 - 2200 W
Capacity	1.7 L
Weight (net)	0.75 kg
Weight (gross)	0.94 kg
Material	Plastic body, stainless steel heating element
Filter	Removable, washable
Water Level Indicator	Double water level scale (both sides)
Lid	Hinged, opens via handle button
Switching	On/Off switch with indicator light, auto shut-off
Safety Features	Auto shut-off when boiling, boil-dry protection
Cord Storage	Wrap-around base
Cleaning	Wipe exterior with damp cloth; descale regularly
Usage	Heating water only; not for other liquids
Warranty	Standard manufacturer warranty (check retailer)

Frequently Asked Questions - SC-020 Scarlett

How do I clean the kettle filter?

Remove the filter from the kettle. Rinse under running water and gently rub with a soft brush. Reinsert after cleaning. Use descaling agents for mineral deposits if needed.

Can I use the kettle to boil milk or other liquids?

No, the kettle is designed for heating water only. Using it for other liquids may damage the appliance or cause injury.

What is the maximum and minimum water level?

Minimum fill is 0.5 L (below 'MIN' mark). Maximum fill is 1.7 L (up to 'MAX' mark). Do not exceed or go below these levels.

How do I descale the kettle?

Use a commercial descaling agent following the product instructions. Alternatively, boil a mixture of water and vinegar (1:2) and let it sit for 30 minutes, then rinse thoroughly. Regular descaling improves performance.

Why does my kettle turn off before the water boils?

If the kettle is switched on empty or with too little water, the boil-dry protection will activate. Allow it to cool for 10 minutes, then refill with water between min and max levels.

Can I open the lid while the water is boiling?

No, never open the lid during boiling. Hot water may splash and cause burns. Wait until boiling stops and the kettle switches off automatically.

How do I store the kettle?

Unplug and let it cool completely. Clean as instructed, wrap the cord around the base, and store in a dry cool place.

Is the kettle safe to use if the cord is damaged?

No, do not operate if the cord or plug is damaged. Have it repaired by a qualified specialist. Using a damaged cord can cause electric shock.

Does the kettle have an automatic shut-off?

Yes, the kettle automatically switches off when the water reaches boiling point. The indicator light will turn off.

What should I do before first use?

Remove all packaging and stickers. Fill the kettle with water to max level, boil, then discard the water. Repeat once. The kettle is then ready for use.

USER MANUAL SC-020 Scarlett

Line drawing of a modern kettle with handle and spout (no text or symbols)

www.scarlett.ru

GB DESCRIPTION

1. Base unit
2. Body
3. Spout
4. Removable filter
5. Lid
6. Lid open handle
7. On/Off switch with indicator light
8. Handle
9. Double water level scale

CZ POPIS

220-240 V~ 50 Hz

1850 - 2200 W 1.7 L 0.75/0.94 kg

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

• Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.
• Before the first switching on check that the voltage indicated on the rating label corresponds to the mains voltage in your house.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• For home use only. Do not use for industrial purposes.
  • Always unplug the appliance from the power supply when not in use.
• Keep the base unit away from water and protect from splashes.
• Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.
• Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.
• Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
• To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
• Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.
• Do not leave the appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never take the kettle from its base while in operation. Switch the appliance off first.
• ATTENTION: Do not open the lid while water is boiling.
• Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.
• The kettle is for heating water only, not for any other purposes and liquids.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

• Remove all packing materials and stickers from the kettle.
• Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

• Remove the kettle from the base unit.
• You can fill the kettle with water via the spout or neck with opened lid.
• Do not fill the kettle with less than 0.5 l of water (less than "MIN" mark) to prevent it from operating dry and more than 1.7 l (up to "MAX" mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.
- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and indicator will light.

SWITCHING OFF

• When water begins to boil, the kettle will switch off automatically and indicator light will go off.
• NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

• Open the lid and pour out the water through the orifice.
  • Always remove the plug from the socket and let the appliance cool down completely.
• Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
• Remove scale regularly, using special descaling agents, available at the market, following given instructions.

FILTER CLEANING

• Remove the filter out of the kettle.
• Place it under a jet of water and rub gently with a soft brush (not included).
• Return the filter to its place.

STORAGE

• Switch off and unplug the appliance; let it entirely cool.

• Complete all requirements of Chapter CLEANING AND CARE.

• The cord can be wrapped around the base area for storage.

• Keep the appliance in a dry cool place.