EJ 4345 E - Dishwasher BRU - Free user manual and instructions
Find the device manual for free EJ 4345 E BRU in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | BRU |
| Model | EJ 4345 E |
| Capacity | 12 place settings |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 50 kg |
| Energy Efficiency Class | A++ |
| Water Consumption per Cycle | 12 L |
| Energy Consumption per Cycle | 1.02 kWh |
| Number of Programs | 6 (Eco, Intensive, Normal, Quick, Glass, Pre-wash) |
| Noise Level | 47 dB(A) |
| Control Type | Electronic with LED display |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Water Safety System | AquaStop |
| Filter Type | Self-cleaning filter |
| Rinse Aid Indicator | Yes |
| Salt Indicator | Yes |
| Adjustable Racks | Yes, upper basket adjustable |
| Remaining Time Display | Yes |
| Spare Parts Available | Spray arms, racks, filters, etc. |
Frequently Asked Questions - EJ 4345 E BRU
How to install the dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water inlet hose to a cold water supply with a 3/4 inch thread. Connect the drain hose to a siphon or sink drain. Plug into a grounded outlet. Adjust the feet to level the appliance. Refer to the manual for detailed installation steps.
What detergent should I use?
Use a dishwasher detergent in powder, gel, or tablet form. For best results, choose a detergent with rinse aid and salt built-in. Always follow the manufacturer's dosage recommendations based on water hardness.
Why is the dishwasher not cleaning properly?
Check for common issues: overloaded racks blocking spray arms, dirty filters, incorrect detergent dosage, low water temperature, or blocked spray arm nozzles. Clean the filters and spray arms regularly. Ensure the water inlet temperature is at least 50°C.
How to clean the filter?
Turn off the dishwasher and remove the lower rack. Unscrew the cylindrical filter (if applicable). Rinse the filter under running water. Remove the flat filter and clean both parts with a soft brush. Reinstall securely. Clean filters monthly.
How to add rinse aid?
Open the rinse aid dispenser lid (usually near the detergent compartment). Fill with rinse aid until the indicator is full (max level). Wipe any spills. Adjust the dosage setting if needed (typically 1-6). Close the lid firmly.
Why is there water left in the bottom?
This could be due to a clogged drain hose or filter, a kinked drain hose, or a faulty drain pump. First, check and clean the filter. Ensure the drain hose is not blocked or bent. If problem persists, the drain pump may need service.
How to use the delay start?
Press the Delay Start button repeatedly to set the desired delay time (e.g., 1-24 hours). The display will show the delay. Close the door; the dishwasher will start automatically after the delay period. To cancel, turn off the appliance.
What does the error code mean?
Common error codes: E1 indicates water inlet failure; E2 indicates drainage problem; E3 indicates heating element issue; E4 means overflow detected; E5 indicates door not closed. Consult the manual for a full list. If error persists, contact support.
How to descale the dishwasher?
Use a commercial dishwasher descaler or a mixture of citric acid (100g) and water. Pour the descaler into the detergent compartment (empty the dishwasher first). Run a 60°C program without dishes. Repeat every 3-6 months depending on water hardness.
How to adjust the upper basket?
Pull out the upper basket. Depending on model, lift the sides to raise the basket or press levers to lower it. Adjust to accommodate tall dishes in the lower rack. Ensure the basket is level and slides smoothly.
User questions about EJ 4345 E BRU
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual EJ 4345 E - BRU and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EJ 4345 E by BRU.
USER MANUAL EJ 4345 E BRU
natural_image
Abstract 3D diagram of layered structural elements with curved arrows indicating rotation or transformation (no text or symbols)
natural_image
Technical line drawing of a mechanical assembly with multiple cylindrical components and a central circular component (no text or symbols)

natural_image
Line drawing of a basket with cutouts and handles, no text or symbols presentnatural_image
Hand inserting a cable into a wire mesh component (no text or symbols visible)
natural_image
Mechanical assembly diagram showing a rotating wheel and connecting rod with spring-like components (no text or symbols)