Inovia Combi 35C ERP - Chauffe-eau et chaudière Biasi - Free user manual and instructions
Find the device manual for free Inovia Combi 35C ERP Biasi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Combi Boiler (Heating & DHW) |
| Brand | Biasi |
| Model | Inovia Combi 35C ERP |
| Energy Source | Natural Gas / LPG |
| Central Heating Output | 35 kW |
| Domestic Hot Water Output | 35 kW (instantaneous) |
| Efficiency Class | A (ERP compliant) |
| Dimensions (H x W x D) | 700 x 400 x 300 mm (approx) |
| Weight | 30 kg (approx) |
| Electric Supply | 230 V / 50 Hz |
| Main Functions | Central heating, domestic hot water, frost protection, summer/winter mode |
| Maintenance and Cleaning | Annual service by qualified technician; clean primary heat exchanger and burner |
| Safety Features | Flame detection, overheat thermostat, pressure relief valve, gas safety valve |
| Spare Parts and Repairability | Spare parts available through Biasi network; repairable by certified engineer |
| General Information | Condensing technology, stainless steel heat exchanger, low NOx emissions |
Frequently Asked Questions - Inovia Combi 35C ERP Biasi
How do I reset the Biasi Inovia Combi 35C ERP boiler?
Press the reset button on the control panel for 3 seconds. If the problem persists, check for error codes and consult the manual.
What does error code E01 mean?
Error code E01 indicates a flame detection failure. Check gas supply and ignition electrodes.
How do I adjust the hot water temperature?
Use the DHW temperature dial on the front panel. Turn clockwise to increase, counterclockwise to decrease.
Why is my boiler not igniting?
Possible causes: no gas supply, air in the gas line, faulty ignition electrode, or blocked condensate drain. Check each.
How often should I service the boiler?
An annual service by a Gas Safe registered engineer is recommended to ensure safe and efficient operation.
Can I use the boiler without water in the system?
No. The boiler requires water pressure between 1 and 2 bar. Operating without water can damage the heat exchanger.
What is the maximum heating output?
The maximum central heating output is 35 kW. This can be adjusted via the heating curve settings.
How do I bleed my radiators?
Use a radiator key to open the bleed valve until water escapes, then close. Check boiler pressure afterward.
The boiler pressure is too high/too low. What should I do?
If above 2.5 bar, bleed a radiator. If below 1 bar, use the filling loop to add water until 1.5 bar.
Where is the serial number located?
The serial number is on a rating plate on the bottom or side of the boiler casing. It starts with 'XXXXXXXX'.
User questions about Inovia Combi 35C ERP Biasi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chauffe-eau et chaudière in PDF format for free! Find your manual Inovia Combi 35C ERP - Biasi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Inovia Combi 35C ERP by Biasi.