GB162-100 - Chauffe-eau et chaudière Worcester - Free user manual and instructions
Find the device manual for free GB162-100 Worcester in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condensing gas boiler |
| Model | GB162-100 |
| Brand | Worcester |
| Category | Water heater and boiler |
| Dimensions (H x W x D) | 800 x 480 x 370 mm |
| Weight | 35 kg |
| Fuel Type | Natural gas |
| Heat Output (Max) | 100 kW |
| Efficiency | Up to 98% (condensing) |
| Functions | Central heating and domestic hot water |
| Installation | Wall-mounted |
| Maintenance | Annual service required |
| Cleaning | Clean external surfaces with damp cloth; do not use abrasive cleaners |
| Safety Features | Flame detection, overheat protection, frost protection, safety valve |
| Reparability | Spare parts available through authorized dealers; repair should be carried out by qualified technician |
| General Information | Low NOx emissions; suitable for natural gas and LPG (conversion kit required); electronic ignition |
Frequently Asked Questions - GB162-100 Worcester
How do I adjust the temperature on my Worcester GB162-100 boiler?
Use the control panel to set the desired heating and hot water temperatures. Refer to the user manual for detailed instructions on navigating the menus.
What does error code E10 mean?
Error code E10 typically indicates a gas pressure problem. Check that the gas supply is turned on and the pressure is correct. Contact a qualified engineer if the issue persists.
How often should I service my GB162-100 boiler?
Annual servicing by a Gas Safe registered engineer is recommended to ensure safe and efficient operation and to maintain warranty validity.
Why is my boiler losing pressure?
Common causes include a leak in the system or a faulty pressure relief valve. Repressurize using the filling loop and check for visible leaks. If pressure drops again, call a professional.
Can I install the GB162-100 myself?
No, installation must be carried out by a Gas Safe registered engineer to comply with regulations and safety standards.
What type of gas does the boiler use?
The standard model is set for natural gas. It can be converted to LPG with an appropriate conversion kit available from Worcester.
How do I reset the boiler after a lockout?
Press and hold the reset button on the control panel for about 3 seconds. If lockout recurs, there may be a fault requiring professional diagnosis.
What is the efficiency rating of the GB162-100?
The GB162-100 is a condensing boiler with an efficiency of up to 98%, which qualifies for ErP A+ rating.
Can I use a smart thermostat with this boiler?
Yes, the boiler is compatible with most smart thermostats including Worcester's own Wave and other OpenTherm devices. Follow thermostat installation instructions.
Where can I find spare parts for my Worcester GB162-100?
Spare parts are available from Worcester's authorized distributors and online spare parts retailers. Always use genuine parts for safety and compatibility.
User questions about GB162-100 Worcester
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chauffe-eau et chaudière in PDF format for free! Find your manual GB162-100 - Worcester and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GB162-100 by Worcester.