DDW06F Brilliant - Dishwasher DELONGHI - Free user manual and instructions

Product Type	Freestanding Dishwasher
Brand	DeLonghi
Model	DDW06F Brilliant
Dimensions (H x W x D)	85 cm x 45 cm x 50 cm
Weight	30 kg
Power Supply	220-240 V, 50/60 Hz
Capacity	10 place settings
Number of Programs	6 (including Eco, Intensive, Quick)
Energy Efficiency Class	A+
Noise Level	47 dB
Water Consumption per Cycle	9.5 L (Eco program)
Energy Consumption per Cycle	0.92 kWh (Eco program)
Drying System	Condensation drying
Water Connection	Cold water only
Safety Features	Child lock, flood protection, overheating protection
Filter System	Self-cleaning filter (needs periodic maintenance)
Salt and Rinse Aid Reservoir	Yes, for hard water areas
Adjustable Racks	Upper rack height adjustable
Delayed Start	Up to 24 hours
Included Accessories	Cutlery basket, instruction manual
Certifications	CE, EMC, RoHS

Frequently Asked Questions - DDW06F Brilliant DELONGHI

How do I install the dishwasher?

Ensure the dishwasher is placed on a stable surface. Connect the water inlet hose to a cold water supply with a 3/4-inch thread. Plug the power cord into a grounded outlet. Level the dishwasher using the adjustable feet.

What detergent should I use?

Use a dishwasher detergent in the form of powder, gel, or tablets. Fill the main detergent compartment for the main wash and the pre-wash compartment if needed. Adjust the amount based on water hardness.

How do I clean the filter?

Turn off the dishwasher and remove the lower rack. Unscrew the cylindrical filter assembly, rinse under running water, and brush off debris. Reinstall securely. Clean the fine filter under the coarse filter regularly.

Why is my dishwasher not draining?

Check if the drain hose is kinked or clogged. Clean the filter and ensure the sink drain is not blocked. Also inspect the drain pump for obstructions. If the problem persists, contact service.

Can I wash plastic items?

Yes, but place them on the upper rack to avoid direct heat from the heating element. Use a low-temperature program (e.g., Eco) to prevent warping. Check if the plastic is dishwasher-safe.

How do I adjust the rinse aid setting?

Open the rinse aid dispenser lid, turn the dial to a higher number (e.g., 3-6) for harder water. Close the lid. The recommended setting is usually 4. Run a cycle to see if drying improves.

What does the 'Salt' indicator mean?

The salt indicator lights up when the water softener needs regeneration salt. Open the salt reservoir cap, fill with dishwasher salt, and close. Use only special dishwasher salt to avoid damage.

How can I save energy?

Use the Eco program for normally soiled dishes. Run full loads, scrape off food scraps without pre-rinsing. Turn off the dishwasher after the drying phase or open the door for air drying.

Why are my dishes not drying completely?

Ensure the rinse aid is filled and the setting is correct. Use the extra drying option if available. Avoid overloading and make sure plastic items are placed on the upper rack. Leave the door ajar after the cycle.

Where can I find spare parts?

Spare parts such as racks, filters, and hoses are available from authorized DeLonghi service centers or online retailers. Use only genuine parts to maintain warranty and performance.

USER MANUAL DDW06F Brilliant DELONGHI

Cutaway view of a white kitchen appliance showing internal components like dish, sink, and rack (no text or symbols visible)

БЫСТРАЯ НАСТРОЙКА

Simple line drawing of a trash bin with crossed lines indicating no waste or restriction (no text or symbols)

⚠️ ВНИМАНИЕ!

Close-up of a flexible cable or wire wrapped in white insulation, placed on a grid-patterned surface (no text or symbols visible)

Illustration of a mechanical device with a knob and a coin, no visible text or symbols

ПРИМЕЧАНИЕ:

Diagram of a mechanical component with a central threaded shaft and surrounding spheres, enclosed in a green wireframe frame (no text or symbols)

Illustration of a basket containing multiple kitchen utensils (no text or symbols visible)

Architectural wireframe diagram of a staircase structure (no text or symbols)

Pure mechanical assembly diagram without any text, numbers, or symbols

Diagram of mechanical components on a grid background, including springs and balls (no text or labels)

Mechanical component diagram showing a lever mechanism with an arrow indicating direction (no text or symbols present)

Interior view of a rectangular electronic device with a black arrow pointing to a component (no visible text or symbols)

Silhouette of a hand with a lightning bolt symbol (no text or numbers)

Technical line drawing of a mechanical assembly with no visible text or symbols

Рисунок 4b

Technical line drawing of a washing machine with internal components and a close-up view showing internal mechanism (no text or symbols)

Simple line drawing of a mechanical component with a circular feature and a bent shaft (no text or symbols)

Technical line drawing of a mechanical device with a screwdriver and internal components (no text or symbols)

-LVD 2006/95/EC
- EMC2004/108/EC
- EUP 2009/125/EC