W620 - Watch PULSAR - Free user manual and instructions
Find the device manual for free W620 PULSAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Watch |
| Brand | Pulsar |
| Model | W620 |
| Movement type | Quartz analog |
| Power supply | 1 x SR626SW battery (replaceable) |
| Case material | Stainless steel |
| Case diameter | 40 mm |
| Case thickness | 10 mm |
| Strap material | Stainless steel or leather (depending on variant) |
| Strap width | 20 mm |
| Water resistance | 50 meters (5 ATM) |
| Crystal | Mineral glass |
| Display type | Analog with hour, minute, and second hands |
| Additional functions | Date window at 3 o'clock |
| Crown position | 3 o'clock (pull to set time/date) |
| Clasp type | Fold-over buckle with safety lock |
| Dimensions (with buckle) | Approx. 40 x 48 x 10 mm |
| Weight | Approx. 120 g |
| Care instructions | Clean with soft cloth; avoid contact with harsh chemicals |
| Warranty | 2 years (manufacturer's warranty) |
| User manual | Available for free download on notice-facile.com |
Frequently Asked Questions - W620 PULSAR
How do I set the time on my Pulsar W620 watch?
Pull the crown out to the second position (all the way). Turn the crown to set the time. Make sure to set the correct AM/PM if your watch has a date window. Push the crown back in completely.
How do I set the date on my Pulsar W620?
Pull the crown out to the first position (halfway). Turn the crown clockwise to adjust the date. After setting, push the crown back in. Avoid setting the date between 9 PM and 3 AM to prevent damage.
What type of battery does the Pulsar W620 use?
The watch uses a standard SR626SW silver oxide battery. It is widely available and can be replaced by a jeweler or watchmaker.
How often should I replace the battery?
Typically every 2-3 years, depending on usage. Signs of low battery include the second hand moving in two-second intervals or stopping entirely.
Is the Pulsar W620 water-resistant? Can I swim with it?
The watch is water-resistant up to 50 meters (5 ATM). This means it can withstand splashes, hand washing, and showering, but not prolonged swimming or diving. Avoid pressing buttons while submerged.
How do I clean my Pulsar W620 watch?
Use a soft, damp cloth to wipe the case and strap. For metal bracelets, a gentle soap solution and a soft brush can be used followed by thorough drying. Avoid solvents or abrasive cleaners.
How do I replace the strap on my Pulsar W620?
Use a spring bar tool to remove the existing strap. Press the spring bar at the lug ends to release. Attach the new strap by inserting one side of the spring bar, then press the other side into place. Ensure the spring bar clicks securely.
My watch stopped. What should I do?
First, check if the crown is fully pushed in. If the watch still doesn't run, the battery likely needs replacement. Take it to a watch repair professional. Do not attempt to open the case yourself.
Does the Pulsar W620 have a second hand?
Yes, the watch has a standard second hand. It moves in discrete steps (one per second) typical of quartz movements.
Where can I find the user manual for the Pulsar W620?
You can download the free user manual in PDF format from notice-facile.com. Just search for 'Pulsar W620' on the website and choose your preferred language.
User questions about W620 PULSAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual W620 - PULSAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W620 by PULSAR.