TVR 2095TT - Television MATSUI - Free user manual and instructions

Type de produit	Color CRT Television
Brand	Matsui
Modèle	TVR 2095TT
Screen Size	20 inches (51 cm diagonal)
Display Type	CRT (Cathode Ray Tube)
Aspect Ratio	4:3
Resolution	625 lines (PAL)
Tuner	Analog (PAL/SECAM)
Inputs	1 x SCART, 1 x RF Antenna, 1 x RCA Audio/Video
Outputs	1 x Headphone Jack (3.5 mm)
Audio Output	2 x 5W (built-in speakers)
Power Consumption (Max)	75 W
Standby Power	< 1 W
Voltage	220-240 V ~ 50 Hz
Weight (approx)	12 kg (26.5 lbs)
Dimensions (with stand)	490 x 450 x 470 mm (W x H x D)
Remote Control	Included (batteries not included)
Languages	English, French, German, Italian, Spanish
Teletext	Yes (Fastext)
Sleep Timer	Yes (up to 120 minutes)
Child Lock	Yes
Maintenance	Clean with soft, dry cloth. Avoid liquids.
Safety Class	Class II (double insulated)

Frequently Asked Questions - TVR 2095TT MATSUI

How do I connect a DVD player or set-top box?

Use the SCART input on the back of the TV. For older devices, you may use the RCA Audio/Video input with a SCART adapter.

Can I use this TV with a digital aerial?

This TV has an analog tuner only. You will need a digital set-top box connected via SCART to receive digital broadcasts.

How do I reset the TV to factory settings?

Press the Menu button, navigate to Setup or Installation, select Reset or Factory Default and confirm. This will erase all channels and settings.

The screen is blurry or has poor focus. What can I do?

Check the brightness and contrast settings. If using an external device, ensure the SCART connection is secure. For persistent blur, the CRT may need degaussing; turn the TV off and on after a few minutes.

Why is there no sound?

Check the volume is not muted. Ensure the headphone jack is not inserted. If using external speakers, verify connections. Also check audio settings in the menu.

How do I clean the screen and cabinet?

Unplug the TV. Use a soft, lint-free cloth slightly dampened with water (not wet). Wipe gently. Do not use alcohol, ammonia, or abrasive cleaners.

Can I mount this TV on a wall?

No, this model is designed for tabletop use with its built-in stand. There are no VESA mounting holes.

The remote control does not work. What should I check?

First, check the batteries (replace with new ones). Ensure nothing is blocking the IR sensor on the TV front. Try pressing any button; the remote's LED should flash if batteries are good.

How do I tune in channels?

Press Menu, go to Installation or Auto Tuning, select Auto Search. The TV will scan all available analog channels and store them.

What should I do if the TV emits a high-pitched whine?

This is normal for CRT televisions due to the flyback transformer. If it becomes very loud or strange, turn off the TV and contact a qualified technician.

USER MANUAL TVR 2095TT MATSUI

Teletext Televideo Recorder

Please read these instructions before attempting to use your combined television and video cassette recorder (TV/ VCR)

Never use your TV/ VCR if it is damaged in any way. Always place your TV/ VCR on a flat level surface avoiding anywhere which may be subject to strong vibration.

Interference - Do not place your TV/ VCR on or near appliances which may cause electromagnetic interference (TV or HI-FI speakers). If you do, it may adversely affect the working of the unit, causing erratic playback distorting picture or sound.

Weather · It is advisable to unplug the aerial during an electrical storm.

Do not remove any fixed covers as this may expose dangerous voltages.

Batteries are easily swallowed by young children. Do not allow young children to play with the remote control unit.

Temperature - Avoid extremes of temperature, either hot or cold, place your TV/ VCR well away from heat sources such as radiators or gas/ electric fires.

Moisture - Do not allow your TV/ VCR to be exposed to rain, moisture or dust. If any liquid is spilt into your TV/ VCR it can cause serious damage. If you spill any liquid into your TV/ VCR switch it off at the mains immediately. Contact your store immediately.

Ventilation - The ventilation holes on the top and sides of your unit prevent it from over heating. Do not block or cover these holes - especially with cloth or paper.

Your TV/ VCR is supplied with an approved 13 amp fused mains plug.

When replacing the fuse always use a 5 amp (BS 1362) proved type.

To obtain a replacement fuse contact your store.

Never use this plug if the fuse cover is missing. To obtain a replacement fuse cover contact your store.

If the mains sockets in your home differ or are not suitable for the type of plug supplied, then the plug should be cut from the mains lead and a suitable type fitted. You must use a 13 amp plug (BS 1363) and fit a 5 amp fuse (BS 1362). If any other type of plug is used a 5 amp fuse must be fitted, either in the plug, adaptor or at the distribution board.

Please refer to the wiring instructions at the back of this book.

Features of your TV/ VCR

Get to know your combined 20" (48cm) colour television and video cassette recorder with on screen programming.

x search system tomatically records marks in the tape whenever you start a recording. These marks are located by your TV/ VCR so that you can go straight to your desired recording without having to keep stopping and viewing your tape.

The built-in timer allows automatic unattended recording of up to 8 TV programmes within 1 month. Using the serial facility you can easily record a programme which is broadcast at the

same time every day or every week. Timer recordings can be programmed and confirmed on screen.

Your TV/ VCR marked "HQ" (high quality) incorporates VHS high quality technology. A built-in detail enhancer is used to boost the recorded signal and provide maximum picture quality playback.

Your TV/ VCR allows you to access Teletext, the magazine services operated by television companies. A variety of information is

ABC 200 available including News, Weather, Financial and Travel information. In addition to Teletext your television incorporates Fastext. Using the four coloured Fastext buttons on the remote control.

you may move around Teletext services with greater ease and speed.

The on screen display allows precise remote control adjustment of brightness, contrast, colour, and sharpness. When you select a channel or make other changes, your TV/ VCR will show an indicator on the screen for a few seconds.

Automatic repeat play system will automatically play back the same tape repeatedly. Your TV/ VCR is pre-set to standard but you may extend the starting time of your video tapes by using the long play feature.

Your TV/ VCR is designed to playback NTSC colour tape. (The format usually used in America and Japan)

Your TV/ VCR includes a Security PIN code feature that can prevent unauthorised use of your TV after it has been disconnected from the mains supply for 30 minutes or longer.

On screen programming allows easy every day use of the functions you use most often.

Useful background information

Remote control operation may become erratic if:

Direct sunlight, fluorescent lamp, standard household lamp (incandescent) or any other strong light source shines on the remote sensor.

When there is an obstacle between your TV/ VCR and the remote control.

If you try to operate your TV/ VCR from a distance greater than 5 metres.

If you try to operate your TV/ VCR away from the normal viewing angle (over 30° either side of the remote sensor).

How to insert batteries

Push and lift the battery cover on the back of the remote control. Use two AAA / R03 / MN2400 size batteries for the remote control. Insert the batteries according to the polarity illustration inside the battery compartment. Make sure + matches + and - matches -.

The batteries may last approximately one year depending on how much the remote control is used. For best performance it is recommended that batteries are replaced on a yearly basis, or when remote control operation becomes erratic. Do not mix old and new batteries or different types.

Weak batteries can leak and severely damage your remote control. Always remove batteries when Immediately they become weak, or if your TV/ VCR is not to be used for a long time.

Your instruction book is divided into four sections.

Contents

Setting up your combined Television and Video Cassette Recorder

This will explain how to set up your Television and Video Cassette Recorder for all its uses.

Page 6

Television operation

This will explain how to use all the features of the Colour Television.

Page 13

Video Cassette Recorder operation

This will explain how to use all the features of the Video Cassette Recorder.

Page 21

Fault finding

If you encounter difficulty using your Television and Video Cassette Recorder some of the most common problems are explained.

Page 42

Installing your TV/ VCR

To complete your installation you will need to connect your TV/ VCR to an aerial (not supplied).

Insert the aerial [tral supplied] into the aerial socket of your TV/ VCR.

The type of aerial required depends on the position of your home, its distance from the transmitter and local interference. If you do not have an aerial and you are uncertain of what to buy, you should seek the advice of a local aerial contractor.

Plug your TV/ VCR into a mains supply (AC).

Connecting your TV/ VCR to a Satellite system using a SCART lead

Due to the wide variety of satellite receivers, decoders and systems available the connection diagram given on this page is only a basic guide. If you require a more detailed explanation please refer to your satellite system instruction.

satellite system using a SCART lead you must select the channel marked AV by pressing 0 button twice.

Partmaster our accessories and spares service can supply any additional connection cables you may require.

Telephone [phone] and ask for a quotation.

All connections must be made with both your TV/ VCR and satellite receiver unplugged from the mains supply.

Your TV/ VCR is installed. Turn to the next page to see how to tune in TV 7

8

229511 B page 8-9 p55 18/1200, 29:33

How to set the clock

Your TV: VCR is fitted with a 24 hour clock. You will be unable to use your TV: VCR properly unless the time and date is set and keeping time correctly. Please note that you will be unable to select TIMER REC SET or ON/OFF TIMER SET from the main menu until you have set the CLOCK.

Make sure that your TV/ VCR is properly installed.

Press the MAIN POWER switch on the front of your TV/ VCR to the on position. Press the ON button on the front of your TV/ VCR or the remote control.

Press the POWER ON buttons on the front of your TV/ VCR

Press MENU. The system setup menu will appear on your TV screen.

If the main menu appears instead, press the PLAY or STOP buttons to highlight "SYSTEM SETUP" then press ENTER.

The TV picture will go slightly darker when a menu appears, this is to make the menus easier to read.

Select the SYSTEM SETUP screen

Press PLAY or STOP to select "CLOCK SET".

Press ENTER, the CLOCK SET screen will appear.

Select the CLOCK SET screen

The date digit will flash. Press REW or F.FWD until the current date is displayed.

Store the date by pressing STOP.

The day shown after the date might not be right until the correct month and year have been set.

Enter the current date

The month digit will flash. Press REW or F.FWD until the current month is displayed. Store the month setting by pressing STOP.

The year digit will flash. Press REW or F.FWD until the current year is displayed. Store the year setting by pressing STOP.

The hour digit will flash. Press REW or F.FWD until the current hour is displayed. (Your TV VCR uses a 24hr clock) Store the hour setting by pressing STOP.

The minute digit will flash. Press REW or F.FWD until the current minute is displayed. Store your setting by pressing ENTER. The CLOCK SET screen will disappear and the time and date will be displayed for 5 seconds.

The current date and time is now set in your TV/ VCR's memory.

How to tune in television stations

Before you can view a television station it must be tuned into your TV/ VCR's memory, this section will show you how to achieve this. You cannot tune TV channels if an aerial (not supplied) Is not connected.

10

2061Bpp:10-11:45

Make sure that your TV/ VCR is properly installed.

Press the MAIN POWER switch on the front of your TV/ VCR to the on position.

Press the ON button on the front of your TV/ VCR or the remote control.

Press the POWERON buttons on the front of your TV: VCR

Press MENU on your remote control. The main control menu will appear.

Press PLAY or STOP on your remote control until the square next to "CH TUNING" starts to flash.

Press ENTER on your remote control.

SelectCHTUNING

Press F.FWD to search up the waveband or REW to search down the waveband.

Each time a station is found the search will stop.

Press REW or F.FWD to continue searching until the station you want is found.

Press EN TER to store the station you selected.

Search for your required station

If you do not press a key within 1 minute your TV/ VCR will remove the tuning menu.

18/12/25, 00:35

Get to know your TV/ VCR

Each button listed in this section has the same function as its corresponding button on the remote control.

Basic TV operation

Selecting a channel.... 14

Adjusting the sound 15

How to mute sound 15

Call 15

Headphone socket 15

Advanced TV operation

Adjusting the picture.... 16

ON and OFF Timer.... 18

Sleep Timer.... 20

Selecting a channel

14

2065TT IB page 14-15 p65 18/12/00, 11:4914

Make sure that your TV/ VCR is properly installed.

Press MAIN POWER switch on the front panel, the red standby indicator will light.

Switch on your television by pressing ON on the front panel or on the remote control.

Switch on your TV then press ON on the set or on the remote control

To put your TV into standby mode, press ON on the remote control. The red standby indicator will light.

The ON button on the remote control doesn't switch the set off completely, it only switches it to standby mode. To turn your television off completely, switch off POWER and unplug the television at the wall socket.

The STANDBY indicator will light

Press the numbered buttons to select channels.

When selecting channels, press the numbered buttons. For example, for channel 3 press 3, for channel 25 press 2 then 5.

When a channel is selected the channel number is displayed in the top right corner of the screen

Press CH/TRACKING up (▲) or down (▼) to select channels in sequence; e.g. 1, 2, 3, 4 etc.

Select channels in sequence using CH up or down

These methods of selection are used for both TV and VCR operation.

Adjusting the volume and call feature

Press VOLUME up (▲) or down (▼) to adjust the sound level.

The sound level can be adjusted by using VOLUME (▲) and (▼)

Press MUTE to switch off the sound.

When the sound is switched off the mute symbol will appear on screen.

Press MUTE a second time or press VOLUME up (▲ or down ( ) to switch the sound back on.

The sound can be temporarily switched off using MUTE

Press CALL on the remote control; the TV screen will display the current time, channel and any other information (e.g. tape counter, record sign).

The info display will not disappear unless you press CALL again.

Press CALL for channel information

If stereo headphones are used, sound may only be apparent through one speaker. If this

happens try a stereo/ mono adaptor (not included) or check the operation of your headphones for independent volume or balance control.

The socket will only accept a jack plug the size of that found on a normal pair of personal cassette player headphones (3.5mm).

When used, the speaker of your TV/ VCR will be disconnected.

Always remove the headphones after use for normal viewing.

Plug your headphones in the headphone socket

The next pages describe in greater detail how to operate your TV.

Adjusting the picture

The picture settings have been adjusted by the factory under optimum signal reception conditions, however conditions may not be the same in your area. After turning on your television, allow it to warm up for a few minutes before making any adjustments. Should you wish to reset picture controls back to factory settings press CAN CEL.

16

Press MENU on your remote control. The on screen display will appear.

Press PLAY or STOP on your remote control to highlight "TV SETUP".

Press ENTER on your remote control.

Press MENU for the on screen display

Press PLAY or STOP to highlight "PICTURE".

Select the picture features

Press ENTER to display the brightness bar; press REW or F.FWD to adjust the brightness of the picture.

Press the REW or F.FWD buttons to adjust the brightness of the

picture

Adjusting the picture

Press ENTER to display the contrast bar; press REW or F.FWD to adjust the contrast of the picture.

Pictures appear sharpest in the daytime by increasing the contrast. In the evening (when surroundings are darker) try reducing the contrast to obtain the best picture.

Press the REW or F.FWD buttons to adjust the contrast of the picture

Press ENTER to display the colour bar; press REW or F.FWD to adjust the colour of the picture.

Press the REW or F.FWD buttons to adjust the colour of the picture

Press ENTER to display the sharpness bar; press REW or F.FWD to adjust the sharpness of the picture.

In weak reception areas, the picture may appear more pleasing when sharpness is set at a lower level.

Press the REW or F.FWD buttons to adjust the sharpness of the

Press MENU three times to clear the display.

Memorised factory settings can be reset by pressing the CANCEL button when any of the picture adjustment bars are on screen.

These methods of adjusting the picture are used for both TV and VCR

Timer functions

The on timer feature allows you to automatically turn on your TV/ VCR at a set time. The on timer will turn on your TV/ VCR everyday at the same time and select the same channel. The off timer allows you to turn off your TV/ VCR at a set time. You can set the off timer in conjunction with the on timer. Please note the on/off timer is NOT the same as the video timer record feature.

18

Press MENU on your remote control. The on screen display will appear.

Press PLAY or STOP on your remote control to highlight "TV SETUP".

Press ENTER on your remote control.

Press PLAY or STOP until the square next to "ON/OFF TIMER" starts to flash.

Press ENTER to display the timer menu.

The square next to "ON TIMER" will flash. Press ENTER to select the on timer. The hour digit will flash.

Press PLAY or STOP to enter the hour at which you want your TV/ VCR to automatically switch on.

Remember your TV/ VCR uses a 24 hour clock.

Press F.FWD. The minute digit will flash.

Press PLAY or STOP to enter the minute at which you want your TV/ VCR to automatically switch on. Confirm your selection by pressing F.FWD.

Select the TV SETUP menu

Select the on/off timer menu

Enter the hour

Enter the minutes

Remember if you are to leave your TV/ VCR unattended for a long period of time then for safety reasons you must unplug your unit from the mains supply.

Timer functions

The channel digit will flash.

Press PLAY or STOP to enter the channel you wish to display when your TV/ VCR switches on. Confirm your selection by pressing F.FWD.

Enter the channel

The date digit will flash.

Press PLAY or STOP to select either the every day or every week options. Confirm your selection by pressing F.FWD.

Enter the date

Press PLAY or STOP to activate your on timer. The word "CANCEL" will change to "SET" when the timer is activated.

If you wish to cancel the timer on function press PLAY or STOP again until the word "CANCEL" is displayed.

Set the on timer

If you make a mistake during setting the on/off timer, press REW or F.FWD to select the information you want to change and then press PLAY or STOP to change it.

If you wish to set the off timer press ENTER and repeat stages 2 - 6.

Once you have set the timer(s) press MENU three times then switch your TV/ VCR to standby by pressing the on button on the remote control.

You may set the off timer

If no off time is set approximately 1 hour after the timer turns on your TV/ VCR your unit will turn off again, this prevents your unit from playing continuously. If you wish to continue viewing after automatic switch on, press any button on the remote control.

The automatic switch on and off functions will only operate

Sleep function

The sleep function allows you to automatically switch your television into standby after a preset amount of time (up to 120 minutes). In addition should you fall asleep or leave your TV/ VCR unattended it will automatically switch into standby 15 minutes after the end of transmissions.

20

To set the sleep timer press SLEEP.

"SLEEP 120" will appear on screen.

The display will clear in five seconds and your TV/VCR will switch off automatically after 120 minutes

Press SLEEP to set the sleep timer

Repeated presses of SLEEP will decrease the sleep timer in 10 minute intervals from 120 minutes to 10 minutes.

1st press..... 120 minutes.

2nd press.... 110 minutes.

...etc. 100, 90, 80.

When you have set the sleep timer your TV/ VCR will return to a normal picture and automatically switch off after the preset sleep time.

Each press of SLEEP will decrease the sleep timer

To cancel the sleep timer set the sleep timer to 0.

The display will clear in five seconds and your TV/VCR will not switch off automatically.

The sleep function will not affect any TV/ VCR record settings, only the picture will shut off after the sleep time passes.

To cancel sleep timer press SLEEP until "SLEEP 0" is displayed

Use ON on the remote control to switch your TV/VCR on after sleep timer has switched it

Basic video operation

How to insert and play a tape 22

Visual rewind and forward 23

Rapid rewind and fast forward.... 23

How to stop and remove a tape 23

Pause 24

Manual and automatic tracking 24

Counter display with zero return.... 25

How to record a TV programme

Instant record 26

Timer record 28

Checking or cancelling timer recordings.... 30

Video index search 31

How to set the security protection

Setting the user registration 32

Teletext

How to use Teletext.... 34

How to connect a video camera or another VCR to your TV/VCR

Connections 38

Help and Specification

How to select the language 40

SCART socket information 41

Fault finding table 42

Wiring instruction...... Back cover page

Specifications ...... Back cover page

How to play a video cassette

Only use VHS video cassette tapes.

VHS HQ

Your VCR can playback Video tapes recorded in the NTSC Colour System (TV system usually used in America and Japan) on PAL 60Hz TV (TV system used in the United Kingdom). To play the NTSC tape press PLAY. Your VCR will playback Video tapes recorded using NTSC Standard play, Long play (LP) and Extended play (EP). However there will be a deterioration in sound quality in the Long play and Extended play modes.

Make sure your TV/ VCR is properly installed and switched on.

Insert a pre-recorded cassette.

When you insert a video cassette with the record protection tab removed (for example a pre-recorded cassette from a video hire shop) playback will start straight away.

Press the PLAY button if your tape does not start to play automatically.

The tape will start playing and the play symbol will appear on the TV/ VCR screen.

If you wish to view the TV station you were watching before you started playing a tape press TV/ REC MONITOR. To return to viewing your tape press TV/ REC MONITOR again.

If you wish your TV/ VCR to rewind to the beginning of a tape once it has finished playing and start to play again.

Press MENU to select the main menu. Press PLAY or STOP until the square next to "AUTO REPEAT" "ON" or "OFF" starts to flash.

Press ENTER to select "ON" or "OFF". Press MENU to clear the screen.

If you do not press STOP the tape will continue until it reaches the end. The auto rewind facility will automatically rewind the tape to the beginning. Your TV: VCR will then automatically eject the cassette.

How to play a video cassette

To visually rewind or forward the tape (picture search) the tape must be playing; press either REW or F.FWD.

The speed of the search time depends on the speed used during recording, either standard play (SP) or long play (LP).

1st press ..... 5 times normal speed (NTSC 3 times) 2nd press..... 7 times normal speed (NTSC 5 times)

1st press .... 7 times normal speed 2nd press.... 13 times normal speed

Return to normal playback by pressing PLAY.

To rapid rewind or forward the tape, press STOP; then press either REW or F.FWD.

If you wish to see the tape programme during rewind or forward mode, press and hold REW or F.FWD. The backward or the forward visual search picture will be seen on the screen. Release it to return to the rewind or forward mode.

The sound is muted during picture search. During picture search you may see white lines across the screen or a distorted picture. This is quite normal and does not mean there is anything wrong with the tape or your TV: VCR.

You will not be able to view the contents of the cassette during rapid rew or 1.1wd

Press STOP to stop playing your video cassette.

The tape will stop and the TV channel you viewed via your TV/ VCR before you started to play your video cassette will be displayed on the TV.

Press EJECT on the front of your TV/ VCR or on the remote control and your tape will be ejected.

Tape will stop and TV will revert to displaying a TV channel

The next page will explain some more useful features of your TV/ VCR's operation.

VCR features

Your TV/ VCR is equipped with useful features to enhance your viewing.

24

When playing a tape, press PAUSE to view a still picture.

The sound is muled during pause. Pause is automatically changed to play after being held for 5 minutes to prevent damaging the tape.

The picture may have white lines across it when paused

Press PLAY to resume playback.

When a tape is played, the digital auto tracking system automatically adjusts the tracking to obtain the best possible picture.

The presence of white lines on the screen is an indication of poor tracking

If white lines appear during playback or the picture starts to shake you may adjust the tracking manually.

Press the TRACKING + or - buttons to obtain the best possible picture.

To resume automatic tracking, press the ATR button on the remote control.

The auto tracking indicator will appear on screen then disappear after 5 seconds

200517 B:qq: 22-35;65 18:2023, 01:5425

Counter and zero return

Your VCR has a counter which can display the actual amount of time (in seconds) a tape has been played. The Zero return feature allows you to set the counter to 00:00:00 at any point in the tape and then rewind and start playing from that point when you press the ZERO RETURN button.

Press CALL to display the counter.

The counter displays how much time (in seconds) has elapsed since the point at which you started playing a tape. The counter advances one second at a time.

The counter advances one second at a time

Press COUNTER RESET to reset the counter to 00:00:00

When you load a tape, the counter will reset. If you rewind the tape from 00:00:00 a minus sign – will be displayed in front of the counter.

Reset the counter

When the VCR is not playing press ZERO RETURN, the tape will rewind until the counter reaches 00:00:00 automatically.

This feature is useful for returning to a point in a tape you wish to view again.

The tape will stop at 00:00:00 on the counter

When you rewind, fast forward or play through blank sections of tape, the counter will stop counting.

The counter will stop when blank sections of tape are detected

How to record and view the same TV programme

The one touch recording feature provides a simple and convenient way to make instant and timed recordings.

26

Make sure that your TV/ VCR is properly installed.

Press the MAIN POWER switch on the front of your TV/ VCR.

Then press the ON button on the front of the TV/VCR or on the remote control

Press the POWER ON buttons on the front of your TV/ VCR

Insert a blank tape.

If the erase protection tab has been removed from the tape, you will not be able to make a recording.

Press the numbered buttons or CH/TRACKING up ( - ) or down (▼) channel on the remote control to select the channel to be recorded.

When selecting channels, press the numbered buttons. For example, for channel 3 press 3, for channel 25 press 2 then 5.

Select the channel to be recorded

How to record and view the same TV programme

If the erase protection tab has been removed, the tape will eject when the REC/OTR button is pressed.

When the tape speed LP is selected, the recording time can be set up to 10 hours.

Pause will operate during continuous recording only. Pause will be released after 5 minutes and continuous recording will stop to prevent damage to the tape or the video head.

Press SP/LP to select either standard play (SP) or long play (LP).

Press REC/ OTR for continuous recording. Additional presses of the REC/ OTR button will allow you to record in timed intervals (displayed on the screen), up to a maximum of 5 hours, at the end of which your VCR will stop recording.

1st press ..... continuous recording

2nd press.... 30 minutes

3rd press .... 1 hour

4th press..... 1 hour 30 minutes

5th press..... 2 hours

6th press..... 3 hours

7th press..... 4 hours

8th press..... 5 hours

Press PAUSE to avoid recording unwanted material. REC/ OTR indicator will flash in the pause mode.

Press PAUSE again to continue recording.

Press STOP to end recording.

Start recording

Pause the tape to avoid recording unwanted material

RECORDING ONE PROGRAMME WHILE WATCHING ANOTHER

While the TV/ VCR is recording one programme, another programme can be seen on this unit. After recording, select the TV channel you want to watch.

Timer recordings

Timer recordings allow you to programme your VCR so that it will record at preset times. The built-in timer allows unattended recording of up to 8 programmes within 1 month.

28

Make sure that your VCR is properly installed and that you have successfully tuned in all your required TV stations and given them a channel number.

e.g.BBC1 - CH 1

BBC2 - CH 2

ITV - CH 3

Channel 4 - CH 4

Channel 5 - CH 5

(if you are in a channel 5 reception area)

SCART socket - CH AV

Insert a blank tape.

If the erase protection tab has been removed from the tape, you will not be able to make a recording. Make sure that the clock is showing the correct present time.

Press MENU. The main menu will appear.

Press PLAY or STOP to select the "TIMER REC SET" menu.

Press ENTER to select the timer screen.

Select the timer screen

Select the next available timer position (blank dotted line) by pressing PLAY or STOP then press ENTER.

Select a recording position

You will not be able to select the "TIMER REC SET" menu until the clock has been set.

Press REW or F.FWD to select the desired day or every day or every week setting. Confirm setting by pressing STOP.

Your TV/ VCR's timer record feature includes a number of weekly settings. eg, instead of setting a specific date you can set the VCR to record MO-FR at the same time every day - This can be useful if you have a favourite programme at a regular time.

Select the date

Please note your TV/ VCR uses a 24 hour clock.

If you have a satellite connected via the Scart socket and wish to record from it select channel AV in setting the channel.

Set the desired start hour and minutes, end hour and minutes, channel and tape speed as in step 4.

When you have finished setting all your recordings press ENTER.

If you wish to make more than one recording repeat stages 3-6. You may set up to 8 programmes in the same way.

Select your settings

Your TV can be switched on or in standby during recording.

Press MENU twice to clear the screen. "PRESS T-REC FOR TIMER RECORDING" will be displayed on the screen.

Store your programme

Press TIMER REC to store your selection. The TIMER REC indicator will light. After completing all timer record programmes your VCR will switch itself off.

You will not be able to set further timer recordings after you have pressed TIMER REC. To set further timer recordings press TIMER REC (the indicator light will go out): make your selection; press TIMER REC (the indicator will light).

Store your selection

If any timer record stage is not completed within 1 minute you will have to start again. 29

Checking and cancelling timer programmes

You can easily check the details and cancel or make corrections for timer programmes.

If the timer rec has been activated, now press TIMER REC to deactivate the timer. The T-REC indicator will disappear.

Press PROGRAM, the timer program screen will be displayed. All timer programme details will be displayed.

If you want to cancel or alter an existing timer programme, press PLAY or STOP to select the programme.

Press CANCEL. The pre-set programme will be cancelled. OR

Press ENTER. You may then adjust the contents of the selected timer programme.

By pressing PROGRAM the timer programmes will be displayed

Press CANCEL to cancel a setting or ENTER to alter an existing one

Press PROGRAM again, the TV on/off timer screen will be displayed.

If you wish to alter the programmed on/off timer, select the on timer or off timer then adjust the contents as described on pages 18-19.

Press PROGRAM twice to display the on/off timer programmes

After checking timer details press PROGRAM to clear the screen.

If there are other timer record programmes remaining the TIMER REC button must be pressed to reactivate them. The T-REC indicator will light. If you do not reset the timer rec facility the remaining timer record programmes will be ignored and will not take place.

Press TIMER REC to reset the timer

Your recordings will only work when timer record is switched ON.

Video index search system

The video index search system enables you to locate the beginning of any recording made on your TV/ VCR. Your TV/ VCR automatically records index marks on the tape whenever a recording is started.

To search for an index mark; or skip over a number of index marks: Press IN DEX during stop or playback mode.

When you record an index mark at the very beginning of a tape, the mark may not be found. During an index search, the tape may stop and begin to play at a slightly different location.

Select the number of index marks to be skipped by using the numbered buttons (1-9).

Press index

Select the number of index marks to be skipped

Press F.FWD or REW.

Your VCR will skip over the selected number of index marks and will start playback at the selected mark.

Please note the tape speed will NOT be as fast as normal rewind or fast forward speeds because your TV/ VCR has to look for the index marks on the video tape.

Your TV/ VCR will attempt to playback from your selected index mark

Your TV/VCR may not be able to find index marks on old or worn out video tapes.

Setting the security protection

In an effort to fight crime, we have equipped your TV: VCR with security protection. When activated your TV: VCR is protected against unauthorised use. You cannot operate the unit if you forget the PIN code. Please ensure that you keep a record of the PIN code in a safe place, in case you forget it.

32

Make sure that your TV/ VCR is properly installed.

Press the MAIN POWER switch on the front of your TV/ VCR to the on position.

Press the ON button on the front of your TV/ VCR or the remote control.

Press MENU. The main control menu will appear.

Press PLAY or STOP to select the "PIN CODE REGISTRATION" menu.

Press ENTER to display the pin code registration screen.

Press PLAY or STOP to select the "OWNER'S NAME". Then press ENTER.

Press PLAY or STOP until the desired letter is displayed.

Press the POWER ON buttons on the front of your TW VCR

The user registration screen will appear

Register your name

Store the letter by pressing REW or F.FWD. You can enter up to 20 letters.

Press ENTER to register your name.

If you make a mistake in registering the owner's name and PIN code press

2005T B page 34-37 p85-18/12/00 11:5-34

To view Teletext press TEXT/ MIX/ TV.

1st press .....Text only
2nd press ....Text and TV picture
3rd press .....TV picture

Teletext feature

Some Teletext pages contain too much information to be displayed on a single page, when this occurs sub-pages are transmitted. Sub-pages are identified by an additional numbering sequence, e.g. 1/3, where the first number indicates the sub-page number and the second indicates the number of available sub-pages.

36

2025T13 page 34-37 p65 18:12:00 11:54:35

Press HOLD to freeze a page.

The hold symbol will appear in the top left corner of the screen.

Press HOLD a second time to release page.

Pages and sub-pages are transmitted in sequence with an adequate pause for reading each page. You may freeze a page which is of particular interest and hold it on screen. Information can not be updated when page/sub-page is held using hold.

Press SUB PAGE to view a sub-page.

4 dashes will appear; if you do not enter any numbers they may only be removed by pressing sub page.

Select the desired sub-page number.

e.g. sub page number 2 press 0 0 0 2 by pressing the direct channel entry buttons.

It is essential to enter four numbers. Using sub page you may view and hold a page or sub-page; as information is received from the transmitter the screen will be updated, e.g. a page of share prices.

You may hold and view a selected page. (information can not be updated)

The display will show 4 hyphens. Select your desired sub-page

200517 13:00: 14-37 p15·18:12:00 11:54:37

Press F/ T/ B to increase the size of the characters on screen.

1st press .....View the top of the page 2nd press .....View the bottom of the page 3rd press .....Return to full view of full page (text normal size)

Press REVEAL to display hidden text.

Some pages contain hidden text, e.g. a quiz page with concealed answers.

Display Teletext items which contain concealed answers

How to connect your TV/ VCR to another VCR

If you connect your TV/ VCR to another VCR it is possible to duplicate a pre-recorded tape. Please note that the picture quality will not be as good as that on the original tape. Make sure all appliances are unplugged from the mains supply and switched off before you attempt to connect the relevant connection leads.

Insert the tape you wish to record ON into your TV/VCR.

Select the AV channel (CH AV) by pressing the 0 button twice on your TV/ VCR.

Insert the tape you wish to record FROM into the second VCR. Press the play button on the second VCR.

Press the REC/ OTR button on your TV/ VCR.

Recording will start.

How to connect your TV/ VCR to a video camera

If you connect your TV/ VCR to a Video camera, it is possible to duplicate a pre-recorded tape. Please note that the picture quality will not be as good as that on the original tape. Make sure all appliances are unplugged from the mains supply and switched off before you attempt to connect the relevant connection leads.

Insert the tape you wish to record ON Into your TV/ VCR.

Select the AV channel (CH AV) by pressing the 0 button twice on your TV/ VCR.

Insert the tape you wish to record FROM into the video camera.

Press the REC/ OTR button on your TV/ VCR.

Press the play button, on the video camera; playback and recording will start.

Your TV/ VCR

SCART lead with appropriate connectors suitable for your video camera (not supplied)

Playback from a video camera.

It is an infringement of the Copyright. Designs and Patents Act 1956, 1988 ²⁰²⁴ and the Performers Protection Act 1958-72 to copy Records, Pre-recorded Cassettes, Pre-recorded video tapes and compact discs or to re-record them in any form without permission of the Copyright owners.

How to select the language

This feature allows you to select the language you wish your TV on screen display to appear in.

Press MENU. The main control menu will appear on your TV screen.

Press PLAY or STOP until the square next to the "SYSTEM SETUP" starts to flash, then press ENTER.

Select the SYSTEM SETUP screen

Press PLAY or STOP to select "LANGUAGE".

Press ENTER, the LANGUAGE screen will appear.

The Language menu will appear the first time you press the MENU button. if the main menu appears instead, press the PLAY or STOP buttons to select Language then press the ENTER button on the remote control.

Select the LANGUAGE screen

Press PLAY or STOP to select desired language.

Store the language by pressing ENTER.

Press MENU to clear the screen.

Select the language

SCART socket information

If your TW VCR is connected to a Satellite system using a full facility SCART lead it will automatically be displayed when your Satellite system is switched on. When using a SCART lead the Satellite station should automatically be displayed without you having to select the AV channel.

If your Satellite system is not displayed when you switch it on you must select the channel labelled CH AV by repeatedly pressing CH up (▲) or down (▼) or pressing 0 button twice.

However if your Satellite system is constantly displayed and no matter what button you press you cannot view another channel you need to purchase an additional lead which will allow you to manually switch the signal on and off. . .

...If you wish to purchase this cable please contact Partmaster, our spares accessories service. Simply telephone [phone] and ask for a quote.

21 Pin SCART terminal

1. Audio output (right)
2. Audio input (right)
3. Audio output (left)
4. Audio earth
5. Blue earth
6. Audio input (left)
7. Blue In
8. Switching voltage (out)
9. Green earth

10. Date line 2

11. Green In

12. Dale line
13. Red earth
14. Reserved
15. Red In
16. Blanking signal
17. Video earth
18. Blanking signal earth
19. Video output
20. Video input
21. Shield' earth

Only use VHS video cassettes.

When you insert a video cassette with the record protection tab removed (for example a pre-recorded tape from a video hire shop) playback will start straight away.

Automatic video head cleaning The video heads are the means by which the TV VCR reads pictures from the tape during playback. In the unlikely event that they become dirty enough to be clogged, no picture will be played back. This can easily be determined if during playback of a known good tape, there is good sound but no picture picture is extremely snowy. The auto head cleaning system clean the video heads automobile if any a video cassette is inserted and ejected, this is very fast as it is being on the head. Manual cleaning may still be necessary in some cases, if this is the case, have the TV VCR checked and cleaned by qualified Mastercare service personnel. Head cleaning cartridges are not recommended because they can be abrasive to your video heads.

To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.

Before requesting service please check the following points

SYMPTOM SOLUTION CAUSE

No standby light or power	Is your TV/VCR plugged in?	Check fuses and plug into an AC outlet
	Have you pressed the power switches on the FRONT of your unit to ON?	Switch on main power at wall and all switches on your unit
	Timer record indicator is lit	Set timer record to off
	Moisture condensation has formed inside your TV/VCR	Wait a few hours
	Your TV/VCR is unplugged	Check fuses and plug into an AC outlet
Recorder does not work even though standby light is on	Aerial connection lead is broken or not connected	Check aerial connections and replace any broken leads
	Have you pressed the power switches on the FRONT of your unit to ON?	Switch on main power at wall and all switches on your unit
No picture, no sound	Possibly station trouble	Try another channel or move aerial away from source of interference
Picture OK, poor sound	Volume control set at minimum position MUTE button has been pressed	Increase the volume
Poor reception; poor colour or no colour	Aerial connection lead is broken or not connected	Check aerial connections and replace any broken leads
	Possibly station trouble	Try another channel or move aerial away from source of interference
	Colour control is not adjusted	Display the colour adjustment bar then press the CANCEL button
No teletext or strange characters or letters on screen	Aerial connection is poor or possibly station trouble	Check aerial connection for broken wires or try another channel

No part of this publication may be reproduced, stored in a mineral system or transmitted in any form or by any means, without the prior permission in writing of Doxeye Stone Group, nor be otherwise circulated in any form of binding or cover other than that in which is published and without a similar condition including this condition being imposed on the subsequent purchaser.

If the problem still exists after checking the points on this page, please call the Mastercare Service Helpline on the number below.

Please note: If a Mastercore engineer is requested to inspect this TV/VCR and if the product is found not to be faulty, or the instruction book has not been followed, our product guarantee is not applicable and a fee will be charged.

Before requesting service please check the following points SYMPTOM SOLUTIONCAUSE

Recording does not work	No tape in your recorder or protection tab been removed from video cassette	Insert video tape. Place adhesive tape over record protection gap
	TV/VCR is switched off	Switch on main power at wall and all switches on your unit
Timer record does not work	Clock is not set properly or there has been a power failure	Set current time and date
	Start and end times not set correctly or timer record has not been pressed	Ccheck the start and end times; look to see if the timer record light is lit
Remote control does not work	It is not pointing towards the remote control sensor on your TV/VCR	Aim remote control at your unit
	You are trying to operate your unit from too far away or there is very bright direct sunlight in the room falling onto TV/VCR remote control sensor	Operate within 5 metres. Reduce light
	Obstacle in path of beam	Clear path of beam
	Batteries are inserted incorrectly; the + and - polarities are the wrong way around	Insert batteries correctly
	Batteries are weak	Replace batteries
	Video heads are dirty	Call a Mastercare engineer. A call out fee will be charged
NO colour or 'snow' in playback picture	Tape is worn or damaged	Try another tape
	Tracking adjustments beyond the range of automatic tracking circuit	Adjust tracking manually using the tracking + and - buttons

Wiring instruction

Warning: If the mains plug is cut from the mains lead of this appliance the plug must be destroyed. A mains plug with bared wires is hazardous if engaged in a mains output socket.

Nominal specifications

For Model TVR 2095TT

The wires in your TV/VCR mains lead are coloured in accordance with the following:-

The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N or coloured Black.

The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L or coloured Red.

No connection must be made to the earth terminal of the plug. You must use a 13 amp plug ^{[55\ 1363]} , and fit a 5 amp fuse ^{[55\ 1362]} .

If any other type of plug is used a 5 amp fuse must be fitted, either in the plug, adaptor or at the distribution board.

2395TT18pp:42-44.p65

44

GENERAL	TVR 2095TT
Power supply	AC230 - 240V ~ 50Hz
Power consumption	65W
Operating Temperature	5°C to 40°C
Dimensions	489mm (W) x 462.5mm (D) x 479.5mm (H)
Weight	22.0kg
TELEVISION
Picture Tube	20" (48cm "V") measured diagonally, 90 degree deflection
Television System Tuner	UK: 625 lines 50 fields PAL IElectronic Tuner
Receiving coverage	UHF Channel Frequencies 21-69
Audio Output Power Speaker	2.5W7.6cm, 8 ohm
VCR
Video recording system	VHS, 2 Rotary Heads Helical Scanning SystemLuminance: FM azimuth recording
Head	Video: 2 Rotary HeadsAudio/Control: 1 Stationary HeadErase: 1 Full Track Erase
Colour signal	Converted sub-carrier phase shift recording
Audio Track	1 track
Tape format	12.65mm high density tape
Tape speed	SP: 23.39 mm/s (NTSC 33.35 mm/s) LP: 11.69mm/s
Rewind time	1' 48" with E-180 cassette
Fast Forward time	1' 48" with E-180 cassette
Input level	Video: 1.0Vpp, 75 ohm unbalancedAudio: 500mV, 50k ohm unbalanced
Output level	Video: 1.0Vpp, 75 ohm unbalancedAudio: 500mV, 1K ohm unbalanced

191203, 03:50