SALTER 1052 - Kitchen scale

1052 - Kitchen scale SALTER - Free user manual and instructions

Find the device manual for free 1052 SALTER in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SALTER 1052 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Kitchen Scale
Brand Salter
Model 1052
Dimensions (approx.) 20 cm x 15 cm x 2 cm
Weight (approx.) 300 g
Power Source 1 x CR2032 battery (included)
Maximum Capacity 5 kg / 11 lb
Readability 1 g / 0.1 oz
Units g, kg, lb, oz, ml (water), fl.oz (water)
Tare Function Yes
Auto-Off After 2 minutes of inactivity
Platform Material Tempered glass
Housing Material Plastic
Display LCD with backlight
Overload Indicator Yes
Low Battery Indicator Yes
Accuracy ±1 g
Cleaning Wipe with a damp cloth; do not immerse
Battery Replacement CR2032, accessible via compartment on bottom
Repairability Battery replacement only; no user-serviceable parts

Frequently Asked Questions - 1052 SALTER

How do I change the battery on my Salter 1052 scale?
Locate the battery compartment on the bottom of the scale. Slide the cover off, remove the old CR2032 battery, and insert a new one with the positive side facing up. Close the cover securely.
Why does my scale display 'Err' or 'Overload'?
The 'Err' or 'Overload' message appears when the weight exceeds the maximum capacity of 5 kg (11 lb). Remove the excess weight immediately to avoid damaging the scale.
How do I switch between grams and ounces?
Press the UNIT button (usually marked 'MODE' or 'UNIT') to cycle through available units: g, kg, lb, oz, ml, fl.oz. The selected unit will appear on the display.
What does the 'LO' message mean?
The 'LO' message indicates a low battery. Replace the CR2032 battery with a new one. If the problem persists, check the battery contacts for corrosion.
How do I use the tare function?
Place an empty container on the scale and press the TARE (or ZERO) button. The display will reset to zero. Then add ingredients to the container; the scale will show only the net weight.
How accurate is the Salter 1052?
The scale has a readability of 1 g (0.1 oz) and an accuracy of ±1 g for weights up to 5 kg. For best results, use on a flat, stable surface and avoid drafts.
Can I weigh liquids directly on the scale?
Yes, you can weigh liquids using the ml and fl.oz units, but these are based on water density. For other liquids, use the tare function with a container and weigh in grams or ounces.
How do I clean the scale?
Wipe the platform and body with a damp cloth and mild detergent if needed. Do not immerse the scale in water or use abrasive cleaners, as this may damage the electronics.
Why does the scale turn off automatically?
The scale features auto-off after 2 minutes of inactivity to conserve battery. Simply press any button or place weight on the platform to wake it up.
What is the warranty for Salter 1052?
Salter offers a 1-year limited warranty against manufacturing defects. Keep your proof of purchase and contact customer support for assistance. Does not cover battery or misuse.

User questions about 1052 SALTER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Kitchen scale in PDF format for free! Find your manual 1052 - SALTER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1052 by SALTER.

USER MANUAL 1052 SALTER

Thank you for purchasing a Salter® Kitchen Scale. Your Salter® scale is an example of superior design and craftsmanship. Please read this instruction manual carefully before use. Keep these instructions handy for future reference.

General Weighing Operation

  1. This scale operates on 2 CR2032 Lithium batteries (Included). There is a plastic strip under the Lithium battery cover to prevent battery drain in shipping. Remove the strip before continuing with these instructions.
  2. Place the scale on a hard, level surface.
  3. Press "ON-TARE" to turn the scale on. The display first shows "-18888", then zero when it is ready for use. If the display does not show zero, press "ON-TARE" to reset (tare) the scale to zero.
  4. Your scale is set at the factory to weigh in pounds/ounces. To switch between grams (g), ounces (oz), pounds and ounces, (lb:oz) and milliliters (ml), press the "UNIT" button.

Aquatronic® feature to measure liquid ingredients: The Aquatronic® liquid measure feature is suitable for all water based liquids, including wine, milk, stock, cream etc. Note: Oils have a lower specific gravity, which will result in a volume reading of approx +10%. If measuring oils by volume on this scale, please adjust for this accordingly.

  1. Place the item to be weighed on the center of the platform. The weight will display. As you add weight, the weight displayed increases.
  2. The scale will turn off automatically after 1 minute of non-use or if there is no change in weight after 3 minutes. Press and hold "ON-TARE" to turn the scale off manually.

Battery Replacement

  1. Your Taylor® scale is equipped with a low battery indicator. It will display "LO" or readings will grow dim or become irregular if the batteries needs replacement.
  2. Open the battery compartment on the bottom of the scale,
  3. Remove the old batteries. Place the new batteries into the battery compartment with the "+" signs showing.
  4. Replace the battery compartment cover.

NOTE: Please recycle or dispose of batteries per local regulations. WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.

Tare Operation

You may wish to weigh ingredients a bowl or other container (not included). In this case, you will need to take, or offset, the weight of the bowl so that only the weight of the ingredients is displayed.

  1. Choose a container that will safely balance on the platform without tipping or falling. Do not use a heavy container, as this might reduce the maximum capacity of the scale.

Tare Operation (Cont.)

  1. While the scale is off, place the empty container on the scale platform. Turn the scale on. The display will show zero. The weight of the container has been zeroed out.
  2. Add the ingredient to be weighed. The weight of the ingredient alone will display.
  3. The weight of additional ingredients may be tared out as well. For example, if a recipe calls for 12 lb rice and 12 lb beans, place the rice into the bowl. Once the correct amount of rice is weighed, press "ON-TARE" until the display is reset to zero. Add the 12 lbs of beans. Both ingredients have been accurately weighed in the same bowl.
  4. When weights have been tared out, the display will show a negative number when the items are removed from the scale. To reset the scale back to zero for a new measurement, press "ON-TARE" until the display resets to zero.

Precautions

  1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Avoid contact with acids, such as citrus juices.
  2. Do not tamper with the scale's internal components. Doing so will invalidate the warranty on this unit and may cause damage. The scale contains no user-serviceable parts
  3. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts. Avoid rough treatment. Treat it with care to ensure the best performance.
  4. This scale is intended for home/consumer use only. It is not intended for commercial or medical use.
  5. This scale is designed to read weights up to 11 lb/176 oz/5000 g/5000 ml. To prevent damage, do not place more than 11 lb/176 oz/5000 g/5000 ml on it.
  6. Do not store scale where you store cleaning chemicals. The vapors from some household products may affect the electronic components of your scale. Do not store scale on its side.
  7. This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do not store anything on the scale.
  8. Do not dispose of batteries in fire; Batteries may explode or leak. Do not mix old and new batteries. Remove the batteries if the scale will not be used for a long period of time.
  9. Unstable Warning: Should "unSt" appear on the display, this indicates the scale is unstable. Place the scale on a hard, level surface during use.
  10. Overload Warning: Should "EEEE" appear on the display during a weighing, this indicates that the maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage could occur.

Ten (10) Year Limited Warranty

Salter® warrants this product to be free from defects in material or workmanship (excluding batteries) for ten (10) years for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should this product require service (or replacement at our option), please pack the item carefully and return if prepaid, along with store receipt showing the date of purchase and a note explaining reason for return to:

©2011 Salter Housewares and its affiliated companies, all rights reserved. Salter® is a registered trademark and When clever meets convenient, that's Living with Salter™ is a trademark of Taylor Precision Products, Inc. and its affiliated companies. All rights reserved.

Made to our exact specifications in China.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SALTER

Model : 1052

Category : Kitchen scale