13778 - Loudspeaker MONOPRICE - Free user manual and instructions

Speaker Type	2-way bookshelf with rear port
Woofer Size	4.5 inches
Tweeter Size	0.75 inches
Frequency Response	75 Hz - 20 kHz (±20 dB)
Crossover Frequency	3 kHz
Nominal Impedance	6 ohms
RMS Power Handling	50 watts per channel
Sensitivity	81 dB
Dimensions (W x H x D)	9.8 x 5.5 x 7.7 inches (251 x 140 x 195 mm)
Weight (each)	4.6 lbs (2.10 kg)
Package Contents	2 speakers, 8 adhesive rubber feet
Installation	Position symmetrically, at least 5 inches from wall; tweeters at ear level
Connection	Use thick gauge speaker wire; banana plugs recommended; maintain polarity
Cleaning	Soft dry cloth only; no chemical cleaners
Usage Environment	Indoor use only; avoid moisture and condensation

Frequently Asked Questions - 13778 MONOPRICE

Can I use these speakers outdoors?

No, these speakers are designed for indoor use only. Exposure to moisture or condensation can damage the speaker cones.

What amplifier impedance rating do I need?

Your amplifier must be stable down to 6 ohms impedance. Using an incompatible amplifier may cause damage.

How should I clean the speakers?

Use a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn marks, slightly dampen the cloth with warm water.

What wire gauge should I use?

Use the thickest gauge speaker wire that fits the binding posts on your amplifier and speakers. Banana or pin plugs are recommended for a secure connection.

How far should the speakers be from the wall?

For best sound quality, position the speakers at least 5 inches from the wall to avoid excessive bass reflection.

What is the recommended listening height?

Mount or place the speakers so that the tweeters are at ear level when you are seated in your listening position.

Do I need to use the included rubber feet?

Yes, the adhesive rubber feet are included to prevent slipping and to isolate the speakers from the surface when placed on a shelf or table.

Can I use different lengths of speaker wire?

For consistent impedance and balanced sound, ensure both speaker wires are the same length.

How do I contact technical support?

Monoprice offers free technical support via live chat on www.monoprice.com (7 days a week) or by email at [e-mail].

What is the crossover frequency of these speakers?

The crossover frequency is 3 kHz, which divides the audio signal between the woofer and tweeter.

USER MANUAL 13778 MONOPRICE

SAFETY WARNINGS AND OPERATING GUIDELINES

- These speakers are for indoor use only. Do not expose these speakers to water or moisture of any kind.

- If operating these speakers in a humid environment, ensure that no condensation occurs. Condensation can cause damage to the speaker cones.

- Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-6pm PT) or via email at [e-mail]

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.

2x 4-inch bookshelf speakers

8x Adhesive rubber feet

INSTALLATION

- For the best quality sound, the speakers should be positioned symmetrical to your listening location and spaced at least 5 inches from the wall.

- Ensure that any mounting location is capable of supporting the full weight of the speakers.

- For best results, the speakers should be mounted in such a way that the tweeters are at ear level when seated in your listening position.

- Use the included adhesive rubber feet if placing the speakers on a flat surface, such as a shelf or table.

CONNECTION

• Ensure your amplifier is powered OFF before making any connections.
• For best results, use the thickest gauge speaker wire that can be supported by the binding posts on your amplifier and these speaker.
• It is recommended to use banana or pin plugs to make the connections.
• For best results, ensure that both speaker wires are the same length. This ensures that the overall impedance is the same for each speaker.
• Ensure that there are no stray wire strands at the connection points.
• Take care to maintain proper polarity in the speaker connections. Use speaker wire with clear polarity markings.
• Ensure that your amplifier is stable down to 6 ohms impedance.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com during regular business hours, 7 days a week. You can also get assistance through email by sending a message to [e-mail]

SPECIFICATIONS

Model	13778
Speaker Type	2-way with rear port
Woofer Size	4.5"
Tweet Size	0.75"
Frequency Response	75Hz ~ 20kHz ±20%
Crossover Frequency	3kHz
Nominal Impedance	6 ohms
Input Power (RMS)	50 watts
Sensitivity	81dB
Dimensions	9.8" x 5.5" x 7.7" (251 x 140 x 195 mm)
Weight (each)	4.6 lbs. (2.10 kg)