XD-8038 - Hi-Fi System KENWOOD - Free user manual and instructions
Find the device manual for free XD-8038 KENWOOD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hi-Fi System |
| Brand | Kenwood |
| Model | XD-8038 |
| Dimensions (approx.) | 250 x 300 x 150 mm (main unit) |
| Weight (approx.) | 5 kg (main unit) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | 50 W (standby: <1 W) |
| Output Power | 25 W + 25 W (RMS) at 4 ohms |
| Signal-to-Noise Ratio | 70 dB (CD) |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Supported Media | CD, CD-R/RW, Cassette Tape |
| Radio Tuner | FM/AM (87.5-108 MHz / 530-1710 kHz) |
| Audio Inputs | AUX (RCA), Headphone (3.5mm) |
| Audio Outputs | Speaker terminals (4 ohms) |
| Equalizer Modes | Preset EQ (Rock, Pop, Classic, Jazz, Flat) |
| Remote Control | Included (IR) |
| Timer Functions | Play timer, Sleep timer |
| Display | LCD with backlight |
| Speaker Impedance | 4 ohms |
| Safety Classification | Class II (double insulation) |
| Cleaning Instructions | Wipe with soft, dry cloth. Do not use solvents. |
| Repairability | Refer to qualified service personnel for repairs. |
| Accessories Included | Remote control, AM loop antenna, FM wire antenna, user manual |
Frequently Asked Questions - XD-8038 KENWOOD
How do I set the clock on my Kenwood XD-8038?
Press the CLOCK button. Use the TUNING or SKIP buttons to set the hour, then press SET. Repeat for minutes. Press CLOCK again to confirm.
Can I connect my smartphone to the XD-8038?
Yes, use the AUX IN jack on the front panel with a 3.5mm cable. Select the AUX input on the system.
How do I program the CD player?
Insert a CD. Press PROGRAM, then use SKIP to choose tracks. Press PROGRAM to add each track. Press PLAY to start programmed playback.
What type of cassette can I play?
The cassette deck supports standard Compact Cassettes (Type I, II, IV). It can play and record on Type I tapes.
How do I clean the cassette heads?
Use a head cleaning cassette available at electronics stores. Follow the instructions provided with the cleaning tape.
Why is there no sound from the speakers?
Check that the speakers are correctly connected to the terminals. Ensure the SPEAKER button is not set to OFF. Verify the volume is turned up and the source is playing.
How do I set the sleep timer?
Press SLEEP repeatedly to set the timer (10, 20, 30, 60, or 90 minutes). The system will automatically turn off after the set time.
Can I record from the radio to cassette?
Yes, tune to the desired station, insert a blank cassette, and press RECORD. The deck will start recording from the radio.
What should I do if the remote control is not working?
Replace the batteries with two AA batteries. Ensure there are no obstructions between the remote and the sensor. Point the remote at the front panel.
How do I reset the system to factory settings?
Unplug the power cord for at least 30 seconds. Plug it back in and press the POWER button. This will reset all settings to defaults.
User questions about XD-8038 KENWOOD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual XD-8038 - KENWOOD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XD-8038 by KENWOOD.