HEDS 1064 - Dishwasher HOOVER - Free user manual and instructions
Find the device manual for free HEDS 1064 HOOVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Hoover |
| Model | HEDS 1064 |
| Place Settings | 12 |
| Energy Efficiency Class | A |
| Annual Energy Consumption | 260 kWh/annum |
| Water Consumption per Cycle | 9.5 L |
| Drying Performance Class | A |
| Noise Level | 44 dB(A) |
| Number of Programs | 6 |
| Programs | Eco, Intensive, Normal, Quick, Glass, Pre-rinse |
| Delay Start | Up to 24 hours |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Water Connection | Cold water only |
| Interior Material | Stainless steel |
| Cutlery Basket | Yes, third basket |
| Salt and Rinse Aid Indicators | Yes |
| Self-Cleaning Filter | Yes |
| Removable Upper Basket | Yes |
Frequently Asked Questions - HEDS 1064 HOOVER
How do I install the dishwasher?
Ensure the dishwasher is placed on a level surface. Connect the water supply hose to a cold water tap, and the drain hose to a suitable drain. Plug into a grounded outlet. Refer to the installation manual for detailed instructions.
What does the error code E1 mean?
Error code E1 indicates a water supply issue. Check that the water tap is open, the inlet hose is not kinked, and the water pressure is adequate.
How do I clean the filter?
Turn off the dishwasher and remove the lower basket. Unscrew the coarse filter and remove the fine filter. Rinse them under running water and reassemble. Clean monthly for best performance.
Can I use regular dish soap?
No, only use dishwasher detergent (powder, gel, or tablets). Regular dish soap creates excess foam and may cause damage.
How do I load the dishwasher for best results?
Scrape off large food residue, but do not pre-rinse. Place plates facing the spray arms, cups upside down, and cutlery with handles up. Ensure items do not block the detergent dispenser.
What does the salt indicator mean?
When the salt indicator light is on, it means the salt level is low. Add dishwasher salt to the reservoir to prevent limescale buildup and improve washing performance.
How do I reset the dishwasher?
To reset, press and hold the Start button for 3 seconds until the display clears. Alternatively, turn off the power for 1 minute and restart.
Why is my dishwasher leaving white spots on glasses?
White spots are typically caused by hard water. Increase the rinse aid dosage and ensure the salt reservoir is full. Use a rinse aid to improve drying and reduce spotting.
Can I wash aluminum pans in the dishwasher?
It is not recommended as aluminum can discolor and transfer residue to other items. Hand wash aluminum cookware to maintain appearance.
How do I activate the delay start?
Press the Delay Start button repeatedly to set a delay of 1-24 hours. Close the door and select a program. The dishwasher will start at the scheduled time.
User questions about HEDS 1064 HOOVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual HEDS 1064 - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HEDS 1064 by HOOVER.