VIBE 226 - Car stereo Lanzar - Free user manual and instructions
Find the device manual for free VIBE 226 Lanzar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo |
| Brand | Lanzar |
| Model | VIBE 226 |
| Dimensions (W x H x D) | 7.1 x 2.0 x 4.5 inches (Standard DIN) |
| Weight | 2.5 lbs |
| Power Supply | 12V DC (Negative Ground) |
| Maximum Power Output | 4 x 50 Watts |
| RMS Power Output | 4 x 20 Watts |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 80 dB |
| Radio Tuner | AM/FM with 30 presets |
| Playback Media | CD, CD-R, CD-RW |
| Audio Input | Front AUX (3.5mm) |
| USB Port | Yes (Front USB, compatible with MP3/WMA) |
| Bluetooth | No (estimated, typical for this model) |
| Equalizer | 3-band EQ (Bass, Mid, Treble) |
| Display | LCD with white backlight |
| Remote Control | Yes (included) |
| Installation | Dashboard mount, DIN sleeve included |
| Spare Parts Availability | Replacement knobs, faceplate, wiring harness (contact support) |
| Repairability | Service manual available; authorized repair centers |
| Cleaning Instructions | Use a soft dry cloth; avoid liquids and abrasives |
| Safety | Fuse protection (10A), anti-theft faceplate (removable) |
Frequently Asked Questions - VIBE 226 Lanzar
How do I reset the Lanzar VIBE 226?
Press the reset button (located behind the faceplate) using a pointed object like a pen tip. This restores factory settings.
Does the VIBE 226 support Bluetooth?
No, this model does not have built-in Bluetooth. Use the front AUX input or USB port for external devices.
What size is the Lanzar VIBE 226?
It is a standard DIN size (7.1 x 2.0 x 4.5 inches) suitable for most vehicles with a DIN slot.
How do I install the VIBE 226 in my car?
Connect the wiring harness to your car's power and speakers, slide the unit into the DIN sleeve, and secure with the provided screws. See manual for details.
What formats does the USB port support?
The USB port supports MP3 and WMA files. Format the USB drive as FAT32 for best compatibility.
Can I use the VIBE 226 with steering wheel controls?
This unit does not have a direct input for steering wheel controls. An aftermarket adapter may be required (not included).
How do I set the clock on the Lanzar VIBE 226?
Press and hold the 'DISP' button until the time flashes, then use the volume knob or preset buttons to adjust hours and minutes.
What is the maximum power output of the VIBE 226?
It delivers 4 x 50 Watts peak power and 4 x 20 Watts RMS. Actual output depends on speaker impedance and battery voltage.
How do I clean the faceplate?
Use a soft, dry microfiber cloth. Do not use any liquids, chemicals, or abrasive materials. Remove the faceplate before cleaning.
What should I do if the stereo does not power on?
Check the inline fuse (10A) and replace if blown. Ensure the wiring harness connections are secure and the car ignition is on.
User questions about VIBE 226 Lanzar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car stereo in PDF format for free! Find your manual VIBE 226 - Lanzar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VIBE 226 by Lanzar.