DS-2CD4135FWD-IZ - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD4135FWD-IZ Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Dome Camera |
| Brand | Hikvision |
| Model | DS-2CD4135FWD-IZ |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 3 Megapixels (2048 × 1536) |
| Lens | 2.8-12mm motorized varifocal lens |
| Field of View | Horizontal: 105° to 35° |
| Minimum Illumination | Color: 0.01 Lux @ F1.2, AGC ON; B/W: 0.005 Lux @ F1.2, AGC ON |
| Day/Night Function | IR cut filter with auto switch |
| IR Distance | Up to 30m |
| Video Compression | H.265+/H.265/H.264+/H.264/MJPEG |
| Network Interface | 10/100Mbps Ethernet (RJ-45) |
| Power Supply | 12V DC or PoE (802.3af) |
| Power Consumption | Max. 12.5W |
| Protection Rating | IP67 |
| Dimensions (Ø×H) | 140 × 122 mm |
| Weight (Net) | Approx. 1.2 kg |
| Operating Temperature | -30°C to 60°C |
| Storage Temperature | -40°C to 70°C |
| Storage | MicroSD slot up to 128GB |
| Included Accessories | Mounting bracket, screws, user manual |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety | Install per local electrical codes; use certified power supply |
| Repairability | Spare parts available from Hikvision authorized centers; user-replaceable SD card |
Frequently Asked Questions - DS-2CD4135FWD-IZ Hikvision
How to reset the camera to factory defaults?
Press and hold the reset button (located near the network cable) for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the default IP address and login credentials?
Default IP is 192.0.0.64 (if using DHCP, check your router). Username: admin. Password: 12345 (change immediately for security).
How do I access the camera remotely?
Configure port forwarding on your router for HTTP (80) and RTMP (554) ports. Use Hikvision's iVMS-4200 software or the Hik-Connect mobile app with the camera's public IP and credentials.
How to install the camera physically?
Mount the camera using the included bracket on a wall or ceiling. Connect Ethernet for PoE or 12V DC and adjust the lens angle. Ensure the IP67 rated connections are sealed.
How to set up motion detection?
Log into the camera's web interface. Go to Configuration > Events > Motion Detection. Enable it, draw detection areas, and set sensitivity. You can configure actions like email alerts or recording.
How to view the camera on a smartphone?
Download the Hik-Connect app. Add the camera by scanning the QR code on the device or by entering the serial number and password. Ensure the camera is connected to the internet.
How to update the firmware?
Download the latest firmware from Hikvision's official website. Access the camera via web browser, go to Configuration > System > Maintenance > Firmware Upgrade. Upload the file and wait for reboot. Do not power off during upgrade.
The camera does not power on. What should I check?
Verify the power source: if using PoE, check the switch/hub; if using 12V DC, test the adapter. Ensure the Ethernet cable is properly connected. The LED indicator should light up; if not, the camera may be defective.
How to configure recording to an NVR or local SD card?
For local SD storage, insert a microSD card and format it via the camera's web interface under Configuration > Storage > Storage Management. For NVR, add the camera via the NVR's menu using the camera's IP and credentials, then set recording schedule.
What software is compatible with this camera?
Use Hikvision's native software: iVMS-4200 (PC), Hik-Connect (mobile), or Hikvision NVRs. It also supports ONVIF Profile S for third-party integration with compatible VMS software.
User questions about DS-2CD4135FWD-IZ Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD4135FWD-IZ - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD4135FWD-IZ by Hikvision.