DS-2CD6332FWD-IS - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD6332FWD-IS Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Model | DS-2CD6332FWD-IS |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Resolution | 3 MP (2048 × 1536) |
| Lens | Motorized 2.8-12mm |
| IR Range | Up to 30 m |
| Day/Night | IR Cut Filter |
| Compression | H.265+/H.265/H.264+/H.264 |
| Power Supply | 12 VDC or PoE (802.3af) |
| Power Consumption | Max. 7.5 W |
| Dimensions | Φ140 × 128 mm (5.5" × 5.0") |
| Weight | Approx. 700 g (1.5 lb) |
| Ingress Protection | IP66 (Weatherproof) |
| Operating Temperature | -30 °C to +60 °C (-22 °F to +140 °F) |
| Storage Temperature | -30 °C to +60 °C (-22 °F to +140 °F) |
| Network Interface | 1 RJ45 10M/100M self-adaptive |
| Video Output | 1 RCA (CVBS) |
| Alarm Input/Output | 1/1 |
| On-board Storage | MicroSD/SDHC/SDXC slot (up to 128 GB) |
| Audio | 1 input (line in), 1 output (line out) |
| Maintenance | Clean lens with soft dry cloth; keep vents unobstructed |
| Safety | UL, FCC, CE certified; use only approved power adapter |
| Spare Parts / Repairability | Contact authorized Hikvision service center for repairs |
Frequently Asked Questions - DS-2CD6332FWD-IS Hikvision
How do I install the DS-2CD6332FWD-IS camera?
Mount the camera using the provided bracket, connect Ethernet cable for PoE or power adapter for 12 VDC, then access via web browser or Hikvision software using default IP 192.0.0.64.
What is the default username and password?
Default username is admin and password is 12345. Change immediately for security.
How do I reset to factory settings?
Press and hold the reset button on the camera for 10 seconds while power is on, then release. The camera will reboot with factory defaults.
What is the maximum resolution and frame rate?
Maximum resolution is 2048×1536 (3 MP) at 30 fps. Lower resolutions allow higher frame rates up to 60 fps.
Does the camera support PoE?
Yes, it supports Power over Ethernet (PoE) IEEE 802.3af. Use a PoE switch or injector to power the camera via Ethernet cable.
How can I view the camera remotely?
Enable UPnP on your router, use Hikvision DDNS or a static IP, then access via Hik-Connect app or web browser with port forwarding (default HTTP port 80, RTSP 554).
What is the IR range and is it weatherproof?
IR range is up to 30 meters (98 ft) for night vision. The camera has an IP66 rating, meaning it is dust-tight and protected against heavy rain.
How do I update the firmware?
Download the latest firmware from Hikvision website, log into the camera web interface, go to System > Maintenance > Firmware Upgrade, select the file, and start upgrade. Do not power off during update.
What recording options are available?
Record continuously or on motion detection to microSD card (up to 128 GB), NVR, or FTP server. The camera also supports edge storage with Hikvision's H.265+ compression.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water or lens cleaner. Gently wipe the lens in a circular motion. Avoid abrasive materials that may scratch the coating.
User questions about DS-2CD6332FWD-IS Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD6332FWD-IS - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD6332FWD-IS by Hikvision.