DVR16-4400 - Security Camera SWANN - Free user manual and instructions
Find the device manual for free DVR16-4400 SWANN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Video Recorder (DVR) |
| Brand | Swann |
| Model | DVR16-4400 |
| Video Channels | 16 |
| Video Input | BNC (x16) |
| Video Output | HDMI, VGA |
| Maximum Recording Resolution | 1080p (1920x1080) |
| Audio Input | 1 x RCA |
| Audio Output | 1 x RCA |
| Recording Modes | Continuous, Scheduled, Motion Detection |
| Internal Storage | Up to 2 SATA HDDs (up to 10TB each, not included) |
| Network Interface | 10/100 Ethernet |
| Remote Access | SwannView app (iOS/Android) or web browser |
| Power Supply | DC 12V, 2A (adapter included) |
| Dimensions (W x D x H) | 430 x 280 x 50 mm (rackmountable) |
| Weight | 3.5 kg (without hard drives) |
| Operating Temperature | 0°C to 40°C |
| Motion Detection | Yes, per channel |
| Email Alerts | Yes, with snapshot attachments |
| USB Backup | 2 x USB 2.0 ports |
| Certifications | CE, FCC |
| Maintenance | Keep well-ventilated; clean dust from vents; avoid moisture |
| Repairability / Spare Parts | Power adapter and replacement fans available from Swann support |
Frequently Asked Questions - DVR16-4400 SWANN
How do I set up the Swann DVR16-4400 for the first time?
Connect the DVR to a monitor via HDMI, attach cameras to BNC inputs, plug in the power, and follow the on-screen setup wizard. You can also install a hard drive (SATA) before powering on.
Can I view my cameras remotely?
Yes, download the SwannView app on your smartphone or tablet. After connecting the DVR to your router via Ethernet, use the app to scan the QR code on the DVR or enter the device ID to access live footage.
How do I install a hard drive in the DVR?
Open the casing by removing screws, locate the SATA slots, mount the hard drive securely, connect the data and power cables, then close the casing. The DVR will detect the drive automatically.
Why is my DVR not detecting the hard drive?
Ensure the drive is properly connected and formatted. The DVR supports drives up to 10TB. If still not detected, try a different SATA port or check if the drive is faulty.
How do I reset the DVR to factory settings?
Go to the main menu, select System Settings > Factory Reset, and confirm. Alternatively, press and hold the reset button (small hole) on the back for 10 seconds while powered on.
What is the maximum number of cameras supported?
The DVR16-4400 supports up to 16 cameras via BNC connections. You can mix different Swann analog cameras as long as they are compatible.
Can I record audio along with video?
Yes, there is one RCA audio input. Connect an external microphone to record audio on one channel. Audio will be recorded with the video from the corresponding camera.
How do I set up motion detection alerts?
In the DVR menu, go to Alarm Settings > Motion Detection. Enable it for each camera, define detection zones, and configure email or push notifications. Ensure the DVR is connected to the internet.
What should I do if the DVR overheats?
Ensure the DVR is placed in a well-ventilated area with clearance around the vents. Check that the fan is running. If necessary, clean dust from vents using compressed air. Avoid placing near heat sources.
Where can I download the user manual?
The manual is available for free on notice-facile.com. Simply search for Swann DVR16-4400 and choose your preferred language to download the PDF.
User questions about DVR16-4400 SWANN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DVR16-4400 - SWANN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DVR16-4400 by SWANN.