Geovision

GV-EBL1100 - Security Camera Geovision - Free user manual and instructions

Find the device manual for free GV-EBL1100 Geovision in PDF.

📄 697 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Geovision GV-EBL1100 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type IP Security Camera
Model GV-EBL1100
Brand Geovision
Image Sensor 1/2.9" Progressive Scan CMOS
Resolution 1920 x 1080 (2MP)
Lens Fixed focal, 2.8mm / 3.6mm (optional)
IR Distance Up to 30m (Smart IR)
Day/Night ICR auto switch
Protection Rating IP67
Power Supply 12V DC / PoE (802.3af)
Power Consumption Max 6W
Dimensions 70mm x 70mm x 150mm (2.76" x 2.76" x 5.91")
Weight Approx. 400g (0.88 lb)
Operating Temperature -20°C to 50°C (-4°F to 122°F)
Video Compression H.265, H.264, MJPEG
Audio Built-in microphone
Alarm I/O 1 input / 1 output
Network Interface 10/100Mbps Ethernet
Supported Protocol IPv4, IPv6, HTTP, HTTPS, FTP, SMTP, UPnP, ONVIF
Mounting Wall / Ceiling mount (bracket included)
Warranty 2 years

Frequently Asked Questions - GV-EBL1100 Geovision

How do I reset the GV-EBL1100 to factory defaults?
Press and hold the reset button (located near the network cable) for 10 seconds while the camera is powered on. The camera will reboot with default settings.
What is the maximum SD card capacity supported?
The GV-EBL1100 supports microSD cards up to 256GB (class 10 or higher) for local storage.
Can I use this camera outdoors?
Yes, the camera has an IP67 rating, making it dust-tight and protected against strong water jets, suitable for outdoor use.
Does this camera support audio?
Yes, it has a built-in microphone for audio capture. Two-way audio requires an external speaker connected via audio output (if available).
What software is compatible with GV-EBL1100?
It works with Geovision GV-Series software (GV-ASManager, GV-Control Center) and third-party software via ONVIF Profile S/T.
How to configure motion detection?
Access the camera's web interface, go to Event > Motion Detection, and draw detection zones. Adjust sensitivity and threshold according to your needs.
What is the field of view?
With the 2.8mm lens, it provides a horizontal angle of approx. 105°, 3.6mm lens gives about 80°.
Is the camera vandal-resistant?
No, the GV-EBL1100 is a standard bullet camera with IP67 weatherproofing but no IK rating for vandal resistance. For vandal-proof, consider the GV-EBD series.
Can I power it via PoE?
Yes, it supports PoE 802.3af, so you can use a single Ethernet cable for both data and power.
How do I update the firmware?
Download the latest firmware from the Geovision support website, upload it via the camera's web interface under Maintenance > Firmware Upgrade.

User questions about GV-EBL1100 Geovision

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual GV-EBL1100 - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-EBL1100 by Geovision.

USER MANUAL GV-EBL1100 Geovision

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Geovision

Model : GV-EBL1100

Category : Security Camera