401383 - 3D Printer 3D Systems - Free user manual and instructions
Find the device manual for free 401383 3D Systems in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | FDM 3D Printer |
| Brand | 3D Systems |
| Model | 401383 |
| Print Technology | Fused Deposition Modeling (FDM) |
| Build Volume | Approx. 200 x 200 x 200 mm |
| Layer Resolution | 0.1 - 0.3 mm |
| Filament Compatibility | PLA, ABS, PETG |
| Nozzle Diameter | 0.4 mm (standard) |
| Print Bed | Heated glass bed, max 120°C |
| Dimensions | 400 x 400 x 500 mm (with spool holder) |
| Weight | 12 kg |
| Power Supply | 100-240V AC, 50-60Hz, 350W |
| Connectivity | USB, SD Card |
| Display | 4.3-inch color touchscreen |
| Supported File Formats | STL, OBJ, GCODE |
| Slicing Software | CubePrint (custom) or Cura |
| Main Features | Auto-leveling, resume on power loss, silent stepper drivers |
| Safety | Overheat protection, enclosure with door interlock |
| Maintenance | Clean nozzle with included tool, lubricate linear rails monthly |
| Spare Parts | Nozzle kit, build plate adhesive, hotend assembly |
| Repairability | User-replaceable nozzle, hotend, and print bed |
| Included Accessories | USB cable, SD card with sample files, filament sample (50g) |
| Warranty | 1 year limited manufacturer warranty |
Frequently Asked Questions - 401383 3D Systems
How do I set up the 3D Systems 401383 for the first time?
To set up the printer, remove all packaging, place the printer on a stable surface, plug in the power cable, and follow the on-screen wizard. Level the print bed using the auto-leveling feature, load filament through the extruder, and run a test print from the included SD card.
What filament types can I use with this printer?
The 401383 is compatible with PLA, ABS, and PETG filaments. For best results, use 1.75mm diameter filament from reputable brands. Avoid flexible filaments unless you upgrade the extruder.
How do I improve print quality on the 401383?
Ensure the print bed is leveled, adjust nozzle temperature for your filament (e.g., PLA: 200-220°C), reduce print speed, and enable retraction settings in your slicer. Use a clean build plate and apply adhesive if needed.
What should I do if the printer doesn't start?
Check the power cable connection and ensure the mains switch is on. Verify the SD card is inserted properly and the file is not corrupted. If the screen is blank, perform a power cycle by unplugging for 30 seconds.
How often should I perform maintenance?
Clean the nozzle after every 50 hours of printing. Lubricate the linear rails monthly. Replace the build plate adhesive sheet when it becomes worn. Check belt tension every 3 months.
What slicing software is recommended?
The printer is designed to work with CubePrint software, which is available on the 3D Systems website. You can also use Cura by importing a custom profile for the 401383 from the community.
Is the printer safe to leave unattended?
The 401383 includes overheat protection and an enclosed frame. However, it's recommended to never leave the printer unattended for extended periods. Always place it on a non-flammable surface.
How can I reduce noise during printing?
The printer features silent stepper drivers, which minimize noise from motor movements. To reduce vibration, place the printer on a foam pad or concrete slab. Ensure all screws are tight.
What is the warranty coverage for the 401383?
The printer comes with a 1-year limited warranty covering defects in materials and workmanship. The warranty does not cover wear-and-tear items like nozzles, build plates, or filament.
Can I upgrade the nozzle or hotend?
Yes, the nozzle is user-replaceable. You can upgrade to a hardened steel nozzle for abrasive filaments or a larger diameter nozzle for faster printing. The hotend assembly can be swapped with compatible aftermarket options.
User questions about 401383 3D Systems
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual 401383 - 3D Systems and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 401383 by 3D Systems.