SOLO7C - Pregnant Microlab - Free user manual and instructions
Find the device manual for free SOLO7C Microlab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Bookshelf Speaker |
| Model | SOLO7C |
| Brand | Microlab |
| Dimensions (W x H x D) | Approx. 210 x 310 x 260 mm per speaker |
| Weight | Approx. 5.5 kg per speaker |
| Power Supply | AC 100-240V, 50/60Hz; built-in amplifier |
| Amplifier Power | 2 x 40W RMS (typical) |
| Frequency Response | 50 Hz - 20 kHz |
| Inputs | RCA, Bluetooth (estimated), 3.5mm AUX |
| Controls | Volume knob, power switch on rear |
| Driver Configuration | 2-way: 1-inch tweeter, 5.25-inch woofer |
| Material | MDF cabinet with wood veneer finish |
| Key Functions | Front panel controls, remote control (optional), bass/treble adjustment |
| Maintenance & Cleaning | Wipe with dry soft cloth; avoid liquids; clean grille with vacuum |
| Safety Warnings | Do not expose to moisture; keep away from heat sources; unplug during storms |
| Spare Parts & Repairability | Contact Microlab support for replacement drivers or amplifier modules |
| General Information | Designed for music listening, home theater, and multimedia use |
Frequently Asked Questions - SOLO7C Microlab
How do I connect my speakers to a TV or computer?
Use the included RCA-to-3.5mm cable or an optical-to-RCA adapter. For Bluetooth, pair by pressing the Bluetooth button on the remote or front panel.
Why is there no sound coming from my speakers?
Check that the speakers are plugged into a power outlet and switched on. Ensure the volume is turned up and the source device is outputting audio. Try a different input source.
Can I use these speakers with a subwoofer?
The SOLO7C does not have a dedicated subwoofer output. However, you can connect a powered subwoofer via a signal splitter from the source.
How do I clean the speakers?
Use a soft, dry microfiber cloth to dust the cabinet. For the grille, gently vacuum with a brush attachment. Avoid using any liquids or chemicals.
What is the recommended placement for optimal sound?
Place the speakers at ear level, at least 20cm from walls to avoid bass boom. Angle them slightly towards the listening position for better stereo imaging.
Is there a warranty on this product?
Microlab typically offers a 1-year warranty covering manufacturing defects. Check your purchase documentation for exact terms.
How can I reset the Bluetooth connection?
Press and hold the Bluetooth button on the speaker or remote for 5 seconds until the LED flashes quickly. Then re-pair with your device.
What should I do if the speakers produce distortion?
Reduce the volume level. Distortion can occur when the amplifier is overdriven. Also check that the source device volume is not at maximum.
Can I wall-mount these speakers?
The SOLO7C does not have built-in keyhole mounts. Use a universal speaker shelf or a sturdy stand that can support the weight (approx. 5.5 kg each).
How do I adjust bass and treble?
Use the bass and treble knobs located on the back panel of the active speaker. Turn clockwise to increase, anticlockwise to decrease.
User questions about SOLO7C Microlab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SOLO7C - Microlab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SOLO7C by Microlab.