AWO213 - Metal Case PULSAR - Free user manual and instructions

Product Type	Metal Case
Brand	Pulsar
Model	AWO213
Material	Aluminum Alloy
Color	Silver
Exterior Dimensions	12.2 x 9.4 x 6.7 inches (310 x 240 x 170 mm)
Interior Dimensions	11.0 x 8.3 x 5.5 inches (280 x 210 x 140 mm)
Weight	2.2 lbs (1.0 kg)
Closure Type	Two locking latches
Handle	Retractable telescopic handle
Wheels	Two durable wheels
Interior Padding	High-density foam with customizable pick-and-pluck
Water Resistance	IP67 rating (dust and waterproof up to 1m)
Temperature Range	-40°F to 140°F (-40°C to 60°C)
Security	Padlock holes on latches
Applications	Camera, drone, tools, electronic equipment
Included Accessories	Shoulder strap, foam set, user manual
Warranty	Lifetime limited warranty

Frequently Asked Questions - AWO213 PULSAR

What is the Pulsar AWO213 case used for?

The Pulsar AWO213 is a metal protective case designed for transporting and storing sensitive equipment such as cameras, lenses, drones, and tools.

Is the AWO213 case waterproof?

Yes, it has an IP67 rating, meaning it is completely dust-tight and can be submerged in up to 1 meter of water for 30 minutes.

Can I customize the interior foam?

Absolutely. The case comes with pick-and-pluck foam that you can shape to fit your equipment perfectly.

What are the interior dimensions of the case?

The interior measures approximately 11.0 x 8.3 x 5.5 inches (280 x 210 x 140 mm), providing ample space for various items.

How secure is the case?

The case features two locking latches with padlock holes, allowing you to add your own padlocks for enhanced security.

Does the case have wheels?

Yes, it includes two durable wheels and a retractable telescopic handle for easy transportation.

What is the weight capacity?

The case can safely hold up to 20 lbs (9 kg) of equipment, depending on the arrangement.

How do I clean the case?

Wipe the exterior with a damp cloth and mild soap. Avoid abrasive cleaners. The interior foam can be vacuumed or gently brushed.

Is there a warranty?

Pulsar offers a lifetime limited warranty against manufacturing defects. Visit their website for details.

What color options are available?

The AWO213 is primarily available in silver. Other colors may be available through special orders.

USER MANUAL AWO213 PULSAR

The AWO 213 metal casings are designed as components (supplying) in intruders alarms, access control systems, security systems etc. There are intended for installation:

• control panel optional with supplementary modules
- access control controllers with optional modules
- radio or GSM transmitter with optional module PSU
- other dedicated devices, components etc.

2. Installation:

The metal casing (+PCB) must be installed by a qualified installer, holding the relevant certificates, required and necessary in the particular country for connecting (interfering with) the 230 V systems and low-voltage installations.

Because the transformer is designed for the continuous operation and is not equipped with ON/OFF switch, the power supply line should have the appropriate overload protection. The user should be informed how to disconnect the unit from the mains (the most often by separate and mark the adequate fuse in the fuse box). The power supply installation should be conform to the applicable standards and law.

The casing (+PCB) should be installed indoors, where the air humidity is normal (RH=90% max. without condensation) and temperature in the range of -10^ to +40^ .

Caution! Prior to entering for installation it is necessary to make sure if the voltage in the 230 V circuit is disconnected. All service works inside the housing must be carried out with 230 V supply voltage disconnected.

1. Mount the PCB (control panel, etc) with dedicated holes (use distance pins, bracket screw).
2. Install metal casing in dedicated place and bring in the connecting ( 230 V) and signal conductors through cables bushings.
   Remarks: supply circuit 230V should be carried out with three-core cable (with yellow-green protective PE conductor).
3. Supply conductors 230 V should be connected to 230 V L-N terminals of the transformers.
   Protective conductor should be connected to the terminal marked with grounding symbol.

Caution!

Operating the power supply without properly made and technically operational electric shock protection circuit is IMPERMISSIBLE! This creates hazard of equipment damage and risk of electric shock.

1. Connect the output of transformer to the terminals (\~AC) on the PCB, using installed cables
   Remarks: connect required voltage U1 or U2 (secondary voltage) for the correct device.
2. If necessary, make other connections required for the correct type of system / device.
   Remarks: consistent with requirements and recommendation of the producer.
3. Start the system (switch on 230V , battery), adjust or configure: according to procedure of the producer's system.

4. After installing and checking the proper operation of the system, close the casing.

5. Parametry techniczne / Technical data:
   PL/EN

S - Moc / Power rating

1) CA64 (PP, EPS, ADR, O-R, O-ROC, O-OC, OPS-OC, OPS-R, OPS-ROC, VGM-16, SR, PTSA, ACC-KP-PS) + 3 x CA10E (CA64E, SM, MST1)

17 Ah:

1) CA4V1, 5,6, 10, VERSA 5,10,15, INTEGRA 24, 32 + 2 x CA10E (CA64E, SM, MST1)
2) CA4V1, 5,6,10, VERSA 5,10,15, INTEGRA 24, 32 + GSMLT1
3) CA4V1, 5,6,10, VERSA 5,10,15, INTEGRA 24, 32 + CA64 (EPS, ADR, O- R, O-ROC, O-OC, VGM-16, SR, ACC- KP-PS)

Moduły/Modules:

1) CA64 (PP, EPS, ADR, O-R, O-ROC, O-OC, OPS- OC, OPS- R, OPS- ROC, VGM-16, SR, PTSA, ACC- KP-PS) + 2x CA10E (CA64E, SM, MST1)

OZNAKOWANIE WEEE

The waste electric and electronic products do not mix with general household waste. There is separate collection system for used electric and electronic products in accordance with legislation under the WEEE Directive and is effective only with EU.

PRODUCENT / PRODUCER

Pulsar sp. j.

Siedlec 150, 32-744 Łapczyca, Poland

Tel. [phone], Fax. [phone]

e-mail: [e-mail], [e-mail]