3M22 - Wristwatch PULSAR - Free user manual and instructions
Find the device manual for free 3M22 PULSAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wristwatch |
| Brand | Pulsar |
| Model | 3M22 |
| Movement | Quartz (battery-powered) |
| Display | Analog |
| Crystal | Hardlex mineral glass |
| Case material | Stainless steel |
| Band material | Stainless steel |
| Case diameter | Approximately 38 mm |
| Case thickness | Approximately 8 mm |
| Weight | Approximately 80 g |
| Water resistance | 3 ATM (30 meters) |
| Battery type | SR626SW |
| Functions | Hours, minutes, seconds, date |
| Clasp | Fold-over clasp with push buttons |
| Maintenance | Wipe with soft dry cloth; avoid solvents |
| Safety | Avoid shocks and extreme temperatures |
| Spare parts | Available at authorized Pulsar service centers |
Frequently Asked Questions - 3M22 PULSAR
How do I set the time on my Pulsar 3M22 watch?
Pull the crown to the second position and rotate it to set the hour and minute hands. Push it back in after setting. Make sure to set the date before the time if your watch has a date function.
How do I set the date on the Pulsar 3M22?
Pull the crown to the first position and turn it slowly until the correct date appears. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
Is the Pulsar 3M22 water-resistant?
It has a water resistance of 3 ATM (30 meters), which means it can withstand splashes and rain but is not suitable for swimming or diving.
What type of battery does the Pulsar 3M22 use?
The watch uses a SR626SW silver oxide battery. It typically lasts about 3 years under normal use.
How do I replace the battery in my Pulsar 3M22?
It is recommended to have the battery replaced by a professional watchmaker. If you have experience, carefully open the case back, replace the battery with a SR626SW, and press the case back firmly until it snaps closed.
How do I adjust the bracelet length of my Pulsar 3M22?
The bracelet links are held by pins or screws. Use a small spring bar tool or screwdriver to remove links. Remove equal numbers from each side for balance. If unsure, visit a jeweler.
How do I clean my Pulsar 3M22 watch?
Clean the case and bracelet with a soft dry cloth. For persistent dirt, slightly dampen the cloth with water and mild soap, then dry immediately. Avoid harsh chemicals or abrasives.
What should I do if my Pulsar 3M22 stops working?
First, check if the crown is fully pushed in. If the watch still doesn't run, the battery may be depleted. Replace the battery or contact a service center.
Can I swim with the Pulsar 3M22?
No, with a water resistance of 30 meters, it is only splash-proof. Avoid swimming, showering, or any activity that exposes it to high water pressure.
Where can I find the user manual for the Pulsar 3M22?
The manual is available for free on notice-facile.com. You can also request a translated version by selecting your language and email address.
User questions about 3M22 PULSAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wristwatch in PDF format for free! Find your manual 3M22 - PULSAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3M22 by PULSAR.