AWO268 - Electronic enclosure PULSAR - Free user manual and instructions

Product Type	Metal Casing for Security Systems
Brand	Pulsar
Model	AWO268
Compliance	EN50131 Grade 3
Dimensions (H x W x D)	300 x 250 x 90 mm (estimated)
Weight	2.5 kg (estimated)
Power Supply	230 V AC, 50 Hz
Transformer	Continuous operation, no ON/OFF switch; secondary voltage selectable (U1 or U2)
Protection Class	I (requires protective earth conductor)
Operating Temperature	-10°C to +40°C
Humidity	Up to 90% RH (non-condensing)
Installation Environment	Indoors
Function	Housing for control panels, access control controllers, radio/GSM transmitters, and other security system components
Material	Metal
Mounting	Wall-mounted with dedicated holes and distance pins
Safety	Disconnect 230 V before installation; proper overload protection required on mains line; mandatory protective earth connection
Maintenance	No regular maintenance required; keep interior dry and clean
Spare Parts / Repairability	Contact producer Pulsar for spare parts; repairs should be carried out by qualified personnel
Waste Disposal	WEEE directive: do not dispose with household waste; use separate collection
Manufacturer	Pulsar sp. j., Siedlec 150, 32-744 Łapczyca, Poland

Frequently Asked Questions - AWO268 PULSAR

What is the Pulsar AWO268 used for?

The AWO268 is a metal casing designed to house control panels, access control controllers, radio/GSM transmitters, and other components in intruder alarm and security systems. It complies with EN50131 Grade 3.

What are the mounting requirements?

The casing must be installed indoors by a qualified installer. Use dedicated holes with distance pins and bracket screws. Ensure the 230 V supply is disconnected before installation.

What power supply is needed?

The unit operates on 230 V AC (50 Hz). The transformer is designed for continuous operation and requires an overload protection on the mains line. Secondary voltage can be selected (U1 or U2) as needed.

Is grounding required?

Yes, a protective earth (PE) conductor must be connected to the terminal marked with the grounding symbol. Operating without proper grounding is impermissible and poses electric shock risk.

What are the environmental limits?

Use indoors with humidity up to 90% RH (non-condensing) and temperature from -10°C to +40°C.

Can I install it myself?

No. Installation must be performed by a qualified installer with relevant certificates for 230 V systems and low-voltage installations.

What are the safety precautions?

Always disconnect 230 V before opening the casing. Ensure the protective earth is correctly connected. Do not operate without proper electric shock protection.

How should I dispose of the product?

Follow the WEEE Directive for waste electrical and electronic equipment. Do not dispose with household waste; use separate collection facilities.

What is the warranty?

Contact the producer Pulsar for warranty information. Repairs should be carried out by authorized personnel only.

Where can I get the manual?

The user manual is available for free download in PDF format from notice-facile.com or the Pulsar website. It includes detailed installation instructions.

USER MANUAL AWO268 PULSAR

AWO 268 metal casings compliant with EN50131 GRADE3 are designed as components (supplying) in intruders alarms, access control systems, security systems etc. There are intended for installation:

• control panel optional with supplementary modules
- access control controllers with optional modules
- radio or GSM transmitter with optional module PSU
- other dedicated devices, components etc.

2. Installation:

The metal casing (+PCB) must be installed by a qualified installer, holding the relevant certificates, required and necessary in the particular country for connecting (interfering with) the 230 V systems and low-voltage installations.

Because the transformer is designed for the continuous operation and is not equipped with ON/OFF switch, the power supply line should have the appropriate overload protection. The user should be informed how to disconnect the unit from the mains (the most often by separate and mark the adequate fuse in the fuse box). The power supply installation should be conform to the applicable standards and law.

The casing (+PCB) should be installed indoors, where the air humidity is normal (RH=90% max. without condensation) and temperature in the range of -10^ircC to +40^ircC .

Caution! Prior to entering for installation it is necessary to make sure if the voltage in the 230 V circuit is disconnected.

All service works inside the housing must be carried out with 230 V supply voltage disconnected.

1. Mount the PCB (control panel, etc) with dedicated holes (use distance pins, bracket screw).
2. Install metal casing in dedicated place and bring in the connecting ( 230 V) and signal conductors through cables bushings.
   Remarks: supply circuit 230V should be carried out with three-core cable (with yellow-green protective PE conductor).
3. Supply conductors 230 V should be connected to 230 V L-N terminals of the transformers.
   Protective conductor should be connected to the terminal marked with grounding symbol.

Caution!

Operating the power supply without properly made and technically operational electric shock protection circuit is IMPERMISSIBLE! This creates hazard of equipment damage and risk of electric shock.

1. Connect the output of transformer to the terminals (\~AC) on the PCB, using installed cables
   Remarks: connect required voltage U1 or U2 (secondary voltage) for the correct device.
2. If necessary, make other connections required for the correct type of system / device.
   Remarks: consistent with requirements and recommendation of the producer.
3. Start the system (switch on 230V , battery), adjust or configure: according to procedure of the producer's system.

4. After installing and checking the proper operation of the system, close the casing.

5. Parametry techniczne / Technical data:
   PL/EN

S - Moc / Power rating

The waste electric and electronic products do not mix with general household waste. There is separate collection system for used electric and electronic products in accordance with legislation under the WEEE Directive and is effective only with EU.

PRODUCENT / PRODUCER

Pulsar sp. j.

Siedlec 150, 32-744 Łapczyca, Poland

Tel. [phone], Fax. [phone]

e-mail: [e-mail], [e-mail]