ENERGIZER QE20010PQ - Power bank

QE20010PQ - Power bank ENERGIZER - Free user manual and instructions

Find the device manual for free QE20010PQ ENERGIZER in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ENERGIZER QE20010PQ - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Energizer
Model QE20010PQ
Product Type Power Bank
Battery Type Lithium Polymer
Battery Capacity 20000mAh
Input (Micro USB) 5V/2A
Input (USB-C PD) 5V/2A, 9V/2A
Output 1 (USB-A) 5V/3A, 9V/2A, 12V/1.5A
Output 2 (USB-C PD) 5V/2A, 9V/2A, 12V/1.5A
Wireless Output 5W/7.5W/10W/15W
Total Output (Wired) 20W max
Dimensions 148 x 70.5 x 28.5 mm
Weight 430g ± 10g
Fast Charging (Cable) Yes (USB-A and USB-C PD)
Wireless Charging Yes, up to 15W
Low-Current Mode Yes (press and hold button)
Protection Features Short circuit, overcharge (PowerSafe)
FCC Compliance Part 15 and 18
Operating Temperature 0°C to 45°C
Storage Temperature -10°C to 60°C
AC Adapter Included No
Warranty Limited (see website)

Frequently Asked Questions - QE20010PQ ENERGIZER

What is the battery capacity of the Energizer QE20010PQ?
The battery capacity is 20000mAh (Lithium Polymer).
Does the QE20010PQ support wireless charging?
Yes, it supports wireless charging with output up to 15W. To activate, press the power button once.
How do I activate fast charging via cable?
Connect only one device to the power bank via cable. Do not press the power button; fast charging activates automatically.
What is low-current mode and how is it used?
Low-current mode is for charging small devices like earbuds or watches. Press and hold the power button to activate. The mode auto-exits after 2 hours of inactivity.
How do I recharge the power bank itself?
Use the included Micro USB or USB-C cable to connect to a USB AC adapter (not included) or computer. Input ratings: Micro USB 5V/2A, USB-C PD 5V/2A or 9V/2A.
What safety protections does the power bank have?
It features PowerSafe Management which guards against short circuit and over-charging for both the power bank and connected devices.
Is the AC charging adapter included?
No, the AC adapter is not included. You need to use your own USB power adapter.
What is the weight and size of the QE20010PQ?
Dimensions are 148 x 70.5 x 28.5 mm and weight is approximately 430g ± 10g.
Where can I find warranty information?
Warranty details are available on the official website: http://www.energizerpowerpacks.com. The product comes with a limited warranty from the date of purchase.
What should I do if the power bank gets wet or damaged?
Avoid water, heat, fire, and severe drops. Do not clean with water or chemicals. If damaged, do not disassemble; contact customer service at service@energizerpowerpacks.com.

User questions about QE20010PQ ENERGIZER

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power bank in PDF format for free! Find your manual QE20010PQ - ENERGIZER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QE20010PQ by ENERGIZER.

USER MANUAL QE20010PQ ENERGIZER

natural_image Line drawing of a modern mobile phone case with ports and a circular logo on the cover (no text or symbols)

EN

Specification:

Model Name: QE20010PQ

Cell Type : Lithium Polymer

Battery Capacity: 20000mAh/

Rated Input: Micro USB 5V/2A

Rated Input: USB-C PD 5V/2A, 9V/2A

Rated Output 1: USB-A SW/3A, 9V/2A, 12V/1.5A

Rated output 2 : USB-C PD SW/2A, 9V/2ZZA, 12V/1.5A

Wireless output: SW/7.5W/Tow/15W Total Output: (90W/May)

Total output : 20W(Hmax.)
Dimensions : 148(L) ×70.5(10 ×28.5(H)) mm

Weight: 430g+10g

SP

Especificaciones:

FOD Protection: Green Light Flashes.

Green light indicates wireless charging is activated.

For fast charge (via cable): connect only one device to power bank to activate fast charge, do not press the power button

For wireless press the power button once to activate wireless charging, last charging (via cable) will switch to normal charging mode. When the phone is removed, the

wireless charging will turn off after 5 seconds, and wired charging will switch to fast charging.

Blinking light indicates recharging

Solid light indicates fully charged.

Modo de Recarga

Low-current Charging Mode

Press and hold to activate low-current charging mode. When the digits are blocking it, indicator entering the lo

In low-current charging mode, the device will consistently provide output without entering standby mode.

To manually exit low-current charging mode, press and hold to turn off low-current mode. If there is no lead for two hours, it will automatically exit low-current charging mode.

Note: To charge low-current devices such as earbuds and watches, please switch this power bank to low-current mode.

power hand to turn current the

Connect Micro-USB/USB-C end to the input port to recharge

Connect the charging cable to

a universal USB AC adapter

Conecte el cable de carga a

Adapter NOT included Adaptader NO include

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device complies with part 18 of the FCC Rules. Information to the user.

  1. the device has potential interference, but the interference is very small and meets the requirements of the ECC rule

  2. Equipment system maintenance is simple, please refer to the manual.

  3. The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.

RF exposure compliance statement:

The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Advertencia:

- Avoid water, heat, fire, penetration of the battery, and severe

drops at all times.

- Do not insert other objects into the USB ports other than the USB connectors.

• Once the product is fully charged, your power pack automatically.

shuts off to save power.

- During charge & recharge, battery may feel slightly warm.

- Do not clean the battery with water or other cleaning products.

Clean the exterior with a lightly wetted cloth or hapein. Normally the battery performance will decline after 2

• Normally the battery performance will decline after 2 years. • Any intentional and physical damage to the battery will not be

under the warranty conditions.

- Battery storage temperature is between -10°C→+60°C, operating

temperature is 0°C\~45°C

- Fully charge the battery before first use to maximize the battery life.

Tip: Fully discharge and recharge the power bank a few times to improve battery level accuracy.

For fast charge (via cable): connect only one device to power bank to activate fast charge.

do not press the power button

For wireless: press the power button once to activate wireless charging, fast charge (via

cable) will switch to normal charging shut off, fast charge will then resume

ENERGIZER QE20010PQ - Advertencia: - 1
PowerSafe Management
Guarantees against short circuit and
over-charging for your power bank and
devices.

ENERGIZER QE20010PQ - Advertencia: - 2
Customer Service
For any question about the product.
please contact us at
service@energizerpowerpacks.com

WARRANTY

All products from the date of purchase are qualified for limited time warrants. For more warranty information, please

visit: http://www.energizerpowerpacks.com

GARANTÍA

Dispose the battery properly, seek for local disposal facility for advice. Do not dispose disassemble, damage, or impede the battery at time

Do not disperse, dissemble, damage, or inductor the battery at all time

©2024 Energizer, Energizer, Energizer Character and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by TennBich International Corp.

UM 2.0E20010PQ EN SP 11

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ENERGIZER

Model : QE20010PQ

Category : Power bank