QE10010PQ - Power bank ENERGIZER - Free user manual and instructions

Product Type	Power bank / Wireless Charger
Brand	Energizer
Model	QE10010PQ
Battery Capacity	10000 mAh
Cell Type	Lithium Polymer
Rated Input (Micro USB)	5V/2A
Rated Input (USB-C PD)	5V/2A, 9V/2A
Rated Output 1 (USB-A)	5V/3A, 9V/2A, 12V/1.5A
Rated Output 2 (USB-C PD)	5V/2A, 9V/2.22A, 12V/1.5A
Wireless Output	5W/7.5W/10W/15W (max 15W)
Total Output	20W (max)
Dimensions (L x W x H)	144.1 x 68.8 x 16.5 mm
Weight	210 g ± 10 g
Fast Charging (Wired)	Supported via USB-A and USB-C (single device)
Wireless Charging Activation	Press power button once
Low-Current Charging Mode	For earbuds, watches; press and hold to activate
Protection Features	Overcharge, short circuit, FOD (foreign object detection)
LED Indicator	Flashing while charging, solid when fully charged
FCC Compliance	FCC Part 15 Class B
Operating Temperature	0°C to 45°C
Storage Temperature	-10°C to 60°C
Warranty	Limited time warranty (see product page)

Frequently Asked Questions - QE10010PQ ENERGIZER

How do I activate wireless charging on the Energizer QE10010PQ?

Press the power button once to activate wireless charging. A green light will flash to indicate it is active. Place your Qi-compatible device on the charging area.

Can I charge two devices at the same time?

Yes, you can charge one device via cable (USB-A or USB-C) and another wirelessly. However, fast charging (wired) will only work when a single device is connected.

How do I enable fast charging via cable?

Connect only one device to the power bank using a compatible cable. The power bank automatically switches to fast charging when a single device is detected. Do not press the power button.

What is low-current charging mode and how do I use it?

Low-current charging mode is designed for charging small devices like earbuds or watches. Press and hold the power button until the digits blink to activate it. It will automatically exit after 2 hours of no load.

How long does it take to fully charge the power bank?

Charging time depends on the input power. Using a 5V/2A adapter, it takes approximately 5-6 hours. Fast charging via USB-C PD (9V/2A) can reduce the time to around 3-4 hours.

What do the LED indicators mean?

Flashing light indicates the power bank is being recharged. A solid light means it is fully charged. When using wireless charging, a green flash indicates activation.

Is the Energizer QE10010PQ compatible with all smartphones?

It can charge any device via USB cable. For wireless charging, it supports Qi-compatible devices. iPhones (8 and later), Samsung Galaxy, and most Android phones support wireless charging.

How do I clean the power bank?

Unplug the power bank and use a lightly dampened cloth to wipe the exterior. Do not use water or cleaning products directly on the ports or battery.

What should I do if the power bank stops working?

First, check the cable and adapter. Ensure the power bank has charge. Try resetting by connecting it to a charger. If the issue persists, contact customer service at [e-mail].

Is it safe to use third-party cables?

Yes, you can use any standard USB-A or USB-C cables. However, for optimal fast charging performance, we recommend using cables that support the required power specifications.

USER MANUAL QE10010PQ ENERGIZER

EN

Specification:

Model Name: QE10010PQ

Cell Type : Lithium Polymer

Battery Capacity: 10000mAh/

Rated Input: Micro USB 5V/2A

Rated Input: USB-C PD SW/2A, 9V/2A

Rated output 1: USB-A SW/3A, 9V/2A, 12V/1.5A

Rated output 2 : USB-C PO 5V/2A, 9V/2.22A, 12V/1.5A

Wireless output: SW/7.5W/Tow/15W Total Output: (60W/May)

Total output: 20W(max.) Dimensions: 1/44+() ×69 R(M) ×16.5(H) mm

Weight: 210n+10n

SP

Especificaciones:

Salida Total: 20W (Max.

Dimensiones : 144.1(L) x68.8(W) x16.5(H) mm

Peso : 210g ± 10g

Package Contents

wireless charging is activated

FOO Protection: Green Light Flashes

Protección FOD : La luz verde parcadea. Inelámbrice esta activada For fast charge (via cable): connect only one device to power bank to activate fast charge, do not press the power button

For wireless, press the power button once to activate wireless charging. Fast charge his cable will switch to normal charging mode. When the phone is removed, the

(will qualify) will switch to normal charging mode. When the phone is removed, the wireless charging will turn off after 5 seconds, and wired charging will switch to fast charging.

Blinking light indicates recharging.

Solid light indicates fully charged.

Low-current Charging Mode

Press and hold to activate low-current charging mode

When the digits are blinking it indicates entering the low current mode.

in low-current charging mode, the device will consistently provide output without entering standby mode.

To manually exit low-current charging mode, press and hold to turn off low-current mode.

If there is no load for two hours, it will automatically exit low-current charging mode. Note: To change low-current devices such as airbuds and watches, please switch this

Note: To charge low-current devices such as earbucks and matches, please switch this power bank to low-current mode.

Connect the charging cable to

a universal USB AC adapter

Adapter NOT included Adaptador NO include

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment is not intended to be used as an interference or interference, but it is not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

• Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device complies with part 18 of the FCC Rules. Information to the user.

1. the device has potential interference, but the interference is very small and meets the requirements of the FCC rule

2. Equipment system maintenance is simple, please refer to the manual.

3. The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.

RF exposure compliance statement:

The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Advertencia:

- Avoid water, heat, fire, penetration of the battery, and severe

drops at all times.

- Do not insert other objects into the USB ports other than the

0.38 connectors. Once the product

- Once the product is fully charged, your power back automatically shuts off to save power.

- During charge & recharge, battery may feel slightly warm.

- Do not clean the battery with water or other cleaning products.

clean the exterior with a lightly wetted cloth or napkin

• Normally the battery performance will decline after 2 years

• Any intentional and physical day under the warranty conditions.

- Battery storage temperature is between -10°C=+60°C, operating

temperature is 0°C\~45°C.

- Fully charge the battery before first use to maximize the battery life.

Tip: Fully discharge and recharge the power bank a few times to improve battery level accuracy.

For fast charge (via cable): connect only one device to power bank to activate fast chains.

do not press the power button

For wireless: press the power button once to activate wireless charging, fast charge (via

cable) will switch to normal charging mode. After 2 mins of idle, wireless charging will shut off first charge will then arrive.

PowerSafe Management
Guarantees against short circuit and over-charging for your power bank and devices.

Customer Service
For any question about the product.
please contact us at
[e-mail]

WARRANTY

All products from the date of purchase are qualified for limited time

warranty. For more warranty information, please visit: http://www.eneraizerpowerparks.com

GARANTÍA

for all general and non-parallel visits, e-mail has an additional source of transparent, per-favor visit.

http://www.energlzerapowerpacks.com

Dispose the battery properly, seek for local disposal facility for advice.

Do not, dispose, dissembore, damage, or incorporate the battery at all time.

©2024 Energizer. Energizer, Energizer Character and certain graphic designs are trademarks of Energizer Brands; LLC and related subsidiaries and are used under license by TennRich International Corp.

UM_2_QE10010PQ_EN_SP_11