dsPIC33AK64MC105 - Microcontroller Microchip - Free user manual and instructions
Find the device manual for free dsPIC33AK64MC105 Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Microcontroller |
| Brand | Microchip |
| Model | dsPIC33AK64MC105 |
| Core Architecture | 16-bit dsPIC33E |
| Flash Memory | 64 KB |
| RAM | 8 KB |
| Operating Voltage | 3.0V - 3.6V |
| Max Clock Speed | 70 MHz |
| Package Type | QFN-28 (6x6 mm) |
| Dimensions (approx.) | 6 mm x 6 mm x 0.9 mm |
| Weight (approx.) | 0.2 g |
| Operating Temperature | -40°C to +125°C |
| Main Functions | Digital signal processing, motor control, power conversion, high-performance real-time control |
| Programming Interface | ICSP (In-Circuit Serial Programming) |
| Power Consumption | Typical 10 mA at 70 MHz |
| Special Features | Dual-core, high-speed PWM, 12-bit ADC, CAN-FD |
| Maintenance | No specific maintenance required; avoid electrostatic discharge and moisture |
| Safety | Use proper ESD protection when handling; operate within specified voltage range |
| Spare Parts / Repairability | Not user-serviceable; replace entire unit if defective |
| General Information | High-performance 16-bit microcontroller for advanced embedded control applications |
Frequently Asked Questions - dsPIC33AK64MC105 Microchip
What is the dsPIC33AK64MC105?
It is a 16-bit microcontroller from Microchip, part of the dsPIC33AK series, designed for high-performance digital signal processing and control applications.
What is the supply voltage range for the dsPIC33AK64MC105?
The recommended operating voltage is 3.0V to 3.6V, typically 3.3V.
How much flash memory does it have?
It has 64 KB of program flash memory.
What is the maximum clock speed?
The maximum clock speed is 70 MHz.
How can I program the dsPIC33AK64MC105?
It can be programmed using the ICSP (In-Circuit Serial Programming) interface, typically with a programmer like Microchip's PICkit or MPLAB Snap.
What are the main application areas?
It is used in motor control, power conversion, sensor processing, and industrial control due to its DSP capabilities and high-speed peripherals.
Does it have analog peripherals?
Yes, it includes a 12-bit ADC with up to 20 channels, and comparators.
What communication interfaces are available?
It supports UART, SPI, I2C, and CAN-FD interfaces.
What is the operating temperature range?
The industrial temperature range is -40°C to +125°C.
Where can I find the full datasheet and documentation?
The complete datasheet and user manual can be downloaded from Microchip's official website or from the notice-facile.com page for this device.
User questions about dsPIC33AK64MC105 Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microcontroller in PDF format for free! Find your manual dsPIC33AK64MC105 - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. dsPIC33AK64MC105 by Microchip.