Rack SP2C621D16N - Server ASROCK - Free user manual and instructions
Find the device manual for free Rack SP2C621D16N ASROCK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server (Rackmount) |
| Brand | ASRock Rack |
| Model | SP2C621D16N |
| Form Factor | 2U Rack |
| Dimensions (H x W x D) | 88.9 mm x 482.6 mm x 648 mm |
| Weight (Empty) | Approximately 25 kg |
| Power Supply | Dual Redundant 800W 80+ Platinum |
| Processor Support | Dual Intel Xeon Scalable (LGA 3647) |
| Chipset | Intel C621 |
| Memory | 16 x DDR4 DIMM slots, up to 2TB ECC RDIMM/LRDIMM |
| Storage | 8 x 3.5" Hot-swap SATA3/SAS bays; 2 x M.2 NVMe |
| Networking | Dual 10GbE (Intel X710) + Dedicated IPMI Gigabit LAN |
| Expansion Slots | 3 x PCIe 3.0 x16 (full-height, half-length) |
| Remote Management | BMC with IPMI 2.0 and virtual media support |
| RAID Support | Software RAID 0/1/10; optional hardware RAID via add-in card |
| Cooling | 4 x hot-swap PWM fans (60mm) |
| Operating Temperature | 10°C to 35°C |
| Safety Compliance | FCC, CE, RoHS |
| Cleaning Instructions | Use a dry, lint-free cloth; avoid liquids or compressed air on components |
| Spare Parts and Repairability | Available via ASRock Rack support; replaceable PSUs, fans, and drives |
Frequently Asked Questions - Rack SP2C621D16N ASROCK
How do I install processors in the SP2C621D16N?
Open the CPU socket lever, align the LGA 3647 processor notches, gently place it in, and close the lever. Apply thermal paste before mounting the heatsink.
What type of memory is compatible?
The server supports DDR4 ECC RDIMM/LRDIMM up to 2133 MHz. 16 slots allow up to 2TB total capacity.
How to configure RAID?
Enter the BIOS setup (press DEL during boot) and navigate to the RAID Configuration menu. For hardware RAID, install a compatible controller and configure it via its utility.
How to reset the IPMI password?
You can reset it via the IPMI web interface using the admin account. If locked out, clear CMOS (jumper J1) or use the IPMI button on the motherboard.
What is the default IPMI IP address?
The default IP is 192.168.0.120 with user admin and password admin. Change it immediately after first login.
Can I use SATA and SAS drives together?
Yes, the backplane supports SATA and SAS drives, but mixing them in a RAID array is not recommended. Use separate controllers or ports.
How to update the BIOS?
Download the latest BIOS from ASRock Rack support page, copy it to a FAT32 USB drive, boot into BIOS flash utility (F6), and select the file.
What power supply specifications are required?
The server requires dual redundant 800W 80+ Platinum power supplies. Ensure input voltage is 100-240V AC.
How to replace a failed fan?
Press the fan tray latch, slide out the fan module, disconnect the cable, and insert a new 60mm PWM fan. Secure it with screws.
What is the warranty period?
ASRock Rack provides a 3-year limited warranty. For details, visit the support page and check your region's terms.
User questions about Rack SP2C621D16N ASROCK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual Rack SP2C621D16N - ASROCK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Rack SP2C621D16N by ASROCK.