ZERO 69 XZ-W - Loudspeaker Wet Sounds - Free user manual and instructions

Product Type	Marine Tower Speaker
Model	ZERO 69 XZ-W
Brand	Wet Sounds
Speaker Size	6.5 x 9 inches (oval)
Power Handling (RMS)	200 Watts
Power Handling (Peak)	400 Watts
Impedance	4 Ohms
Frequency Response	50 Hz - 20 kHz
Sensitivity	90 dB (1W/1m)
Dimensions (L x W x D)	10.5 x 8.5 x 5.5 inches
Weight	4.5 lbs each
Material	UV-resistant polypropylene cone, rubber surround
Grille Material	Stainless steel
Waterproof Rating	IP65 (splash-proof)
Mounting Type	Flush or surface mount
Recommended Amplifier Power	50-200 Watts RMS per channel
Included Accessories	Mounting hardware, wire terminals, grilles
Warranty	1 year limited
Cleaning Instructions	Wipe with damp cloth; do not use harsh chemicals
Safety Note	Disconnect power before installation; ensure secure mounting

Frequently Asked Questions - ZERO 69 XZ-W Wet Sounds

What is the ZERO 69 XZ-W speaker designed for?

It is a marine tower speaker designed for use on boats, particularly for outdoor marine environments with high power handling and weather resistance.

Are the ZERO 69 XZ-W speakers waterproof?

Yes, they have an IP65 rating, meaning they are protected against water jets and splashes, but not for submersion.

What size are these speakers?

They are 6.5 x 9 inches oval speakers, commonly referred to as 6x9 marine speakers.

What is the impedance of the ZERO 69 XZ-W?

The impedance is 4 Ohms, compatible with most marine amplifiers.

How much power can these speakers handle?

They handle 200 Watts RMS and 400 Watts peak power.

Can I use these speakers in my car?

While designed for marine use, they can be used in vehicles, but they are optimized for outdoor and wet conditions.

What tools do I need for installation?

Basic tools like a screwdriver, wire stripper, and drill for mounting holes are typically needed.

How do I clean the speakers?

Wipe with a damp cloth and mild soap if needed. Avoid abrasive cleaners or pressure washers.

What is the warranty period?

Wet Sounds offers a 1-year limited warranty against defects.

Are installation instructions included?

Yes, the manual includes step-by-step installation instructions and safety precautions.

USER MANUAL ZERO 69 XZ-W Wet Sounds

Close-up of a black and white electronic speaker bowl with mesh grille, showing front and side views (no text or symbols on the main body)

Congratulations!

Thank you for choosing this Wet Sounds™ product!

Wet Sounds is synonymous with live, loud, and clear audio solutions, built to serve the needs of the marine and powersports enthusiast. The ZERO Series is a first of its kind innovation for Wet Sounds, taking the legendary REV tower speaker performance and re-imagining it for optimal use in more confined spaces.

The high output in small, sealed enclosures means ZERO Series allows for ZERO compromises. These speakers can also be used with or without a twist-lock grille, making them ideal for both custom and OEM replacement applications. The ZERO Series speakers and subwoofers utilize materials such as Nylas, a composite of nylon and fiberglass, providing improved stability and superior strength versus conventional speaker materials.

Please take a moment to read the instruction manual before starting your installation. The guide will explain the benefits of the technologies developed by Wet Sounds and will help you understand the correct installation methods and use of this product. If you have any questions or concerns, please contact a certified Wet Sounds dealer. You may also contact Wet Sounds technical support by dialing 1-877-WET-SPKR (1-877-938-7757).

Table of Contents

Please take a moment to look over this instruction manual before enjoying the product.

ZERO 6 | ZERO 8 Technology Specifications .... 3

ZERO 6 | ZERO 8 Installation Specifications 4-5

ZERO 57 | ZERO 69 Technology Specifications .... 6

ZERO 57 | ZERO 69 Installation Specifications .... 7-8

Limited Warranty 9

ZERO 6 SPEAKER SPECIFICATIONS

RMS: 100W

Peak: 200W

Impedance: 4Ω

Frequency Response: 65Hz - 20kHz

Sensitivity: 90 dB at 1W/m

Mounting Depth: 2.72"

Hole Cut Out: 5.63"

Weight: 2.4 lbs (1.0 kg)

ZERO 8 SPEAKER SPECIFICATIONS

RMS: 150W

Peak: 300W

Impedance: 4Ω

Frequency Response: 55Hz to 20kHz

Sensitivity: 91.5 dB at 1W/m

Mounting Depth: 3.32"

Hole Cut Out: 7.36"

Weight: 3.4 lbs (1.5 kg)

Grille Options
XZ Grille XY Grille

Technical line drawing of a circular mechanical component with radial slots and a separate side profile (no text or symbols)

Grille Dimensions

ZERO 6: 6.89" x .91"

ZERO 8: 8.96" x 1.11"

Simple diagram showing a circular object with a textured fill and a separate curved shape (no text or symbols)

ZERO 6: 6.97" x .96"

ZERO 8: 8.94" x 1.24"

Speaker Dimensions
ZERO 6

ZERO 8

Circular diagram with concentric rings and radial markers, no text or symbols present

Installation Specifications

We recommend checking if the mounting surface is flat with a square or level. Mounting to a curved surface will damage the product.

Technical diagram of a mechanical component with a red 'X' marking and a curved base (no text or symbols)

Simple line drawing of a mechanical component with a green checkmark indicating selection (no text or symbols)

2 Tape the surrounding surface to prevent damaging the finish, and avoid cutting outside the cut line to prevent improper fitment.

3 For speaker alignment, the terminal indicates the bottom of the speaker, and the opposing lock tabs help for horizontal alignment.

Continued on the next page.

Installation Specifications

4
Pre-drill the screw locations to prevent surface cracking.

5
Fasten the speaker with stainless steel 5/32" x 1.25" Phillips screws.

Diagram showing a device connected to a panel with a tool, no text or symbols present

6
Place the grille on the speaker in a 45° angle.

7
Apply downward pressure on the grille and twist clockwise to lock.

Circular mechanical component with radial blades and central hub, shown with a red curved arrow indicating rotational motion (no text or symbols)

8
Connect the speakers to the amplifier or source unit using spade connectors for each terminal.

Top-down architectural diagram of a circular building interior with labeled components (no text or symbols beyond basic labels)

Note: ZERO Series has a standard Deutsch connector compatible connection. (PN: DT04-2P) PIN 1 (+) PIN 2 (-)

ZERO 57 SPEAKER SPECIFICATIONS

RMS: 100W

Peak: 200W

Impedance: 4Ω

Frequency Response: 65Hz - 20kHz

Sensitivity: 90 dB at 1W/m

Mounting Depth: 2.64"

Hole Cut Out: 6.37" x 4.97"

Weight: 2.3 lbs (1.0 kg)

ZERO 69 SPEAKER SPECIFICATIONS

RMS: 150W

Peak: 300W

Impedance: 4Ω

Frequency Response: 55Hz to 20kHz

Sensitivity: 91.5 dB at 1W/m

Mounting Depth: 3.32"

Hole Cut Out: 9.27" x 6.40"

Weight: 3.1 lbs (1.4 kg)

Speaker Dimensions

ZERO 69ZERO 57*

Technical drawing of an oval mechanical component with radial slots and central hole (no text or symbols)

*Only the ZERO 69 comes with a grille. No grille is available for the ZERO 57.

Installation Specifications

We recommend checking if the mounting surface is flat with a square or level. Mounting to a curved surface will damage the product.

Technical diagram of a mechanical or architectural component with a red 'X' mark and no visible text or symbols.

Pure mechanical assembly diagram without any text, numbers, or symbols

2 Tape the surrounding surface to prevent damaging the finish, and avoid cutting outside the cut line to prevent improper fitment.

3 For speaker orientation, the mounting tabs indicate the top and bottom of the speaker.

Continued on the next page.

Pre-drill the screw locations to prevent surface cracking.

ZERO 5x7: Fasten with stainless steel 5/32" x 1.25" Phillips screws.

Technical line drawing of a mechanical assembly with a tool and component (no text or symbols)

ZERO 6x9: Place the XZ grille on the speaker. Fasten the speaker and grille using the stainless steel 5/32" x 1.25" Phillips screws.

Technical line drawing of a mechanical assembly with a tool and component, no text or symbols present

Connect the speakers to the amplifier or source unit using spade connectors for each terminal.

Top-down architectural or engineering diagram showing concentric circular structures with labeled components (no readable text or symbols)

Note: ZERO Series has a standard Deutsch connector compatible connection. (PN: DT04-2P) PIN 1 (+) PIN 2 (-)

Limited Warranty

What This Warranty Covers

This is a “Limited” warranty. This warranty covers any defects in materials and workmanship and the warranty only applies to the original purchaser and is not transferable. This warranty is only valid if the original purchase was made from an authorized Wet Sounds dealer.

How Long Coverage Lasts

This warranty runs for 2 years from the date of the purchase.

What Is Not Covered

This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. For information on how to prevent fading or discoloration, consult recommendations on cleaning products. Wet Sounds, Inc. does not cover the cost for removal and reinstallation of any kind. Additionally, shipping to Wet Sounds, Inc. is covered by the purchaser. This warranty is void and inapplicable if Wet Sounds deems that the product was abused or misused; including but not limited to Speaker product that has been improperly-powered (under or over powered), causing thermal (burnt voice coil) and/or mechanical failure (torn surrounds or spiders), damage caused by accident, mishandling, improper installation, negligence, normal wear and tear, excessive water or heat damage, freight damage or products that have been altered in any way. (The warranty is not transferable and will neither apply to products purchased from unauthorized dealers nor product owned by anyone other than the original purchaser from an authorized Wet Sounds dealer.) Wet Sounds is not responsible for any damages to a consumer's boat or person from a product failure. The warranty is void if Wet Sounds deems the product was installed or used improperly. Wet Sounds shall not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law.

What Wet Sounds, Inc. Will Do

Wet Sounds, Inc will repair any part of your product that proves to be defective in materials or workmanship. In the event repair is not possible, Wet Sounds, Inc. will replace the product in question. If it is deemed necessary, Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price if that model is no longer available. Labor cost and materials needed to complete this service will be at no charge to the purchaser. Additionally, the cost of shipping to the consumer is also covered under this warranty.

How to Obtain Warranty Service

Contact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at [e-mail]. A service representative will assist you in the necessary actions to verify that the problem that you are experiencing is covered under warranty. If it is in fact a warranty issue, Wet Sounds will issue an RA number for tracking purposes and give instructions on sending the product in for evaluation.

How State Law Applies

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Internet Warning

Wet Sounds, Inc. products sold on any unauthorized website or internet auction site are void of any and all manufacturer's warranty. Please contact Wet Sounds at 877-938-7757 or visit our website at www.wetsounds.com to search for an authorized site and/or an authorized retailer near you.

Caution & Respect

Wet Sounds speakers can achieve very high sound pressure levels. Please use this product responsibly. Be aware that sound travels great distances across water so please respect other boaters especially while loading/unloading at the ramp or dock. Wet Sounds, Inc. is not responsible for any violations of the law that may be a direct result of excessive volume. Please abide by the rules but have fun doing it.

PROUDLY DESIGNED

IN THE USA

Wet Sounds, Inc.

www.wetsounds.com

877-938-7757

2975 Louise Street

Rosenberg, Texas 77471 USA